FCC ID 2AWY6-ERT8723DUCT

WIFI Module

by EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED

Grantee Code: 2AWY6   Product Code: ERT8723DUCT
Latest application date: 2025-06-30

FCC ID Device Details

FCC ID2AWY6-ERT8723DUCT
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AWY6
Product CodeERT8723DUCT
Applicant BusinessEXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED 🇨🇳
Related Domains caixun.net.cn
Equipment ClassWIFI Module
Test FirmShenzhen NTEK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2025-06-30
2402-2480 MHzOriginal Equipment2025-06-30

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-12-27PDF 757.4 KB
User manualUsers Manual2025-12-27PDF 757.4 KB
Internal PhotosInternal Photos2025-12-27PDF 212.9 KB
Internal photosInternal Photos2025-12-27PDF 212.9 KB
External PhotosExternal Photos2025-12-27PDF 159.3 KB
External photosExternal Photos2025-12-27PDF 159.3 KB
Label and locationID Label/Location Info2025-06-30PDF 179.5 KB
Test Setup photo---DTSTest Setup Photos2025-12-27PDF 452.5 KB
2.4GWIFI report-1Test Report2025-06-30PDF 5 MB
2.4GWIFI report-2Test Report2025-06-30PDF 3.3 MB
ANTTest Report2025-06-30PDF 751.2 KB
Antenna specificationsTest Report2025-06-30PDF 751.2 KB
BLE reportTest Report2025-06-30PDF 2.6 MB
BT reportTest Report2025-06-30PDF 4.1 MB
2.911 (d)(5)(i)CertificationEquipmentTypev1.2Attestation Statements2025-06-30PDF 77.8 KB
2.911 (d)(5)(ii)CertificationApplicantv1.3Attestation Statements2025-06-30PDF 75.9 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2025-06-30PDF 75.9 KB
2.911 (d)(7)USAgentforServiceofProcessv1.3Attestation Statements2025-06-30PDF 64.6 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2025-06-30PDF 37.9 KB
FCC Short & Long Term Confidentiality Request Rev4.1 ULCC52 497 8562925Cover Letter(s)2025-06-30PDF 37.9 KB
Letter of Authorization Rev2.0Cover Letter(s)2025-06-30PDF 38.2 KB
LetterofAuthorizationRev2.0Cover Letter(s)2025-06-30PDF 38.2 KB
Modular Approval Request Rev 4.0Cover Letter(s)2025-06-30PDF 182.6 KB
MPERF Exposure Info2025-06-30PDF 182.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 118.2 KB
Block diagram Metadata onlyBlock DiagramPDF 118.2 KB
SCH Metadata onlySchematicsPDF 103.9 KB
Operation Description Metadata onlyOperational DescriptionPDF 127.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 127.1 KB

Application Information

Application IDGZc1n/NL5+vog4FgChFUTg==
Final Action Date2025-06-30
Application PurposeOriginal Equipment
Applicant FRN0029787975
ModelERT8723DUCT
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWIFI Module
Responsible PartyZilong Lai, yf.aggcs2@caixun.net.cn , +86-15776493370
Technical ContactEXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED, yf.aggcs2@caixun.net.cn
Test FirmAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., certification@ntek.org.cn , 8675561159384
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/27/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
GZc1n/NL5+vog4FgChFUTg==2025-06-30Original Equipment
DrjLHLfUpRgCrUkc+YUT5A==2025-06-30Original Equipment

Equipment Authorization

FrequencyOutputGrant Notes
2402-2480 MHz0.0050300CC
2402-2480 MHz0.00046CC
2412-2462 MHz0.03891CC

Grants

TCB Grant - Application GZc1n/NL5+vog4FgChFUTg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/30/2025

Application Dated: 06/30/2025
EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED
Floor1,Workshop1, NO.88, SOUTH BAOTONG ROAD,XIKENG
COMMUNITY, YUANSHAN STREET, LONGGANG DISTRICT,
Shenzhen, 518115
China
 
Attention: Zilong Lai ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AWY6-ERT8723DUCT
Name of Grantee:  EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00046  
CC 15C 2412.0  -  2462.0 0.03891  

Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application DrjLHLfUpRgCrUkc+YUT5A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/30/2025

Application Dated: 06/30/2025
EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED
Floor1,Workshop1, NO.88, SOUTH BAOTONG ROAD,XIKENG
COMMUNITY, YUANSHAN STREET, LONGGANG DISTRICT,
Shenzhen, 518115
China
 
Attention: Zilong Lai ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AWY6-ERT8723DUCT
Name of Grantee:  EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00503  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.