FCC ID 2AX3BMFM7

AC2100 Tri-band Whole Home Mesh WiFi System

by SHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD

Grantee Code: 2AX3B   Product Code: MFM7
Latest application date: 2020-12-01

FCC ID Device Details

FCC ID2AX3BMFM7
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AX3B
Product CodeMFM7
Applicant BusinessSHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD 🇨🇳
Related Domains tenonetwork.com
Equipment ClassAC2100 Tri-band Whole Home Mesh WiFi System
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: V7TMESH12 Grant Date: 07/09/20202020-12-01
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: V7TMESH12 Grant Date: 07/09/20202020-12-01

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2020-12-01PDF 821.1 KB
External photosExternal Photos2020-12-01PDF 496.3 KB
Label and label locationID Label/Location Info2020-12-01PDF 589.9 KB
Authorization letter for change FCC IDCover Letter(s)2020-12-01PDF 78.8 KB
Authorization letter of applicationCover Letter(s)2020-12-01PDF 218 KB
Letter of change FCC IDCover Letter(s)2020-12-01PDF 422.5 KB
Product equality declarationCover Letter(s)2020-12-01PDF 554.2 KB

Application Information

Application IDzSZFa0i2qjehgR2jTc2YVg==
Final Action Date2020-12-01
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: V7TMESH12 Grant Date: 07/09/2020
Applicant FRN0030150643
ModelMFM7
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAC2100 Tri-band Whole Home Mesh WiFi System
Responsible PartyQUN HOU, Chief Executive Officer, penghp@tenonetwork.com , 0755-21041743
Test FirmSophia Huang, BTL Inc., Sophia.huang@newbtl.com , +86-769-83183000
TCB Emailtcb-essen@cetecom.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
zSZFa0i2qjehgR2jTc2YVg==2020-12-01Change in identification of presently authorized equipment. Original FCC ID: V7TMESH12 Grant Date: 07/09/2020
KFnUmIFH9jD9HWuyxCQ7yg==2020-12-01Change in identification of presently authorized equipment. Original FCC ID: V7TMESH12 Grant Date: 07/09/2020

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.995000015CCC, MO
5180-5240 MHz0.24815ECC, MO
5745-5825 MHz0.98415ECC, MO

Grants

TCB Grant - Application zSZFa0i2qjehgR2jTc2YVg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 12/01/2020

Application Dated: 12/01/2020
SHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD
NO.415, 4F, ZHONGZHI NEXONE BUILDING
SANLIAN COMMUNITY, LONGHUA DISTRICT
SHENZHEN, 518000
China
 
Attention: QUN HOU , Chief Executive Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX3BMFM7
Name of Grantee:  SHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC2100 Tri-band Whole Home Mesh WiFi System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO 15E 5745.0  -  5825.0 0.984  

Output Power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application zSZFa0i2qjehgR2jTc2YVg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD
NO.415, 4F, ZHONGZHI NEXONE BUILDING SANLIAN COMMUNITY, LONGHUA DISTRICT
SHENZHEN, 518000
China
  Date of Grant: 12/01/2020

Application Dated: 12/01/2020
 
Attention: QUN HOU , Chief Executive Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX3BMFM7
Name of Grantee:  SHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC2100 Tri-band Whole Home Mesh WiFi System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO 15E 5745.0  -  5825.0 0.984  

Output Power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application KFnUmIFH9jD9HWuyxCQ7yg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 12/01/2020

Application Dated: 12/01/2020
SHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD
NO.415, 4F, ZHONGZHI NEXONE BUILDING
SANLIAN COMMUNITY, LONGHUA DISTRICT
SHENZHEN, 518000
China
 
Attention: QUN HOU , Chief Executive Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX3BMFM7
Name of Grantee:  SHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD
Equipment Class: Digital Transmission System
Notes: AC2100 Tri-band Whole Home Mesh WiFi System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.995  

Output Power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application KFnUmIFH9jD9HWuyxCQ7yg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD
NO.415, 4F, ZHONGZHI NEXONE BUILDING SANLIAN COMMUNITY, LONGHUA DISTRICT
SHENZHEN, 518000
China
  Date of Grant: 12/01/2020

Application Dated: 12/01/2020
 
Attention: QUN HOU , Chief Executive Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX3BMFM7
Name of Grantee:  SHENZHEN TENO NETWORK TECHNOLOGIES CO.,LTD
Equipment Class: Digital Transmission System
Notes: AC2100 Tri-band Whole Home Mesh WiFi System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.995  

Output Power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: