FCC ID 2AX46WFBTA

Turbox C610 SOM

by Swivl

Grantee Code: 2AX46   Product Code: WFBTA
Latest application date: 2024-01-23

FCC ID Device Details

FCC ID2AX46WFBTA
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AX46
Product CodeWFBTA
Applicant BusinessSwivl 🇺🇸
Related Domains swivl.com
Equipment ClassTurbox C610 SOM
Test FirmBay Area Compliance Laboratories Corp (Shenzhen)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOXC610 Grant Date: 02/16/20212024-01-23
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOXC610 Grant Date: 02/16/20212024-01-23
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOXC610 Grant Date: 02/16/20212024-01-23

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2024-01-23PDF 254.9 KB
Label & Label LocationID Label/Location Info2024-01-23PDF 112.8 KB
2.911 (d)(5)(i) Attestation StatementAttestation Statements2024-01-23PDF 93.5 KB
2.911 (d)(5)(ii) Attestation StatementAttestation Statements2024-01-23PDF 78.4 KB
US Agent Attestation LetterAttestation Statements2024-01-23PDF 100 KB
Authorization Letter from Original GranteeCover Letter(s)2024-01-23PDF 58.9 KB
Change in ID Request LetterCover Letter(s)2024-01-23PDF 88 KB
FCC Agent Authorization LetterCover Letter(s)2024-01-23PDF 82.6 KB
Letter of AuthorizationCover Letter(s)2024-01-23PDF 43.5 KB

Application Information

Application IDskVbPDtztOJQrqgV6w81XA==
Final Action Date2024-01-23
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOXC610 Grant Date: 02/16/2021
Applicant FRN0030167233
ModelWFBTA
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionTurbox C610 SOM
Responsible PartyAmith Vijaykumar, Electrical Engineer, amith@swivl.com , 6502644994
Test FirmWell Wang, Bay Area Compliance Laboratories Corp (Shenzhen), qa.sz@baclcorp.com , 86-755-33320018
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
skVbPDtztOJQrqgV6w81XA==2024-01-23Change in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOXC610 Grant Date: 02/16/2021
Tlvr0Z2CC0m4L15SvC7R7g==2024-01-23Change in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOXC610 Grant Date: 02/16/2021
JiR4vfsPFu0hOrtPizHpNQ==2024-01-23Change in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOXC610 Grant Date: 02/16/2021
6sn9U7SL0wsdBLJ0OdiwaQ==2024-01-23Change in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOXC610 Grant Date: 02/16/2021

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2402-2480 MHz0.00615CCC
2402-2480 MHz0.005000015CCC
2412-2462 MHz0.05815CCC
5180-5240 MHz0.0315ECC
5260-5320 MHz0.03115ECC, ND
5500-5720 MHz0.03115ECC, ND
5745-5825 MHz0.02915ECC

Grants

TCB Grant - Application Tlvr0Z2CC0m4L15SvC7R7g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/23/2024

Application Dated: 01/23/2024
Swivl
1450 El Camino Real
Menlo Park, CA 94025
 
Attention: Amith Vijaykumar , Electrical Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX46WFBTA
Name of Grantee:  Swivl
Equipment Class: Part 15 Class B Digital Device
Notes: Turbox C610 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Tlvr0Z2CC0m4L15SvC7R7g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Swivl
1450 El Camino Real
Menlo Park, CA 94025
United States
  Date of Grant: 01/23/2024

Application Dated: 01/23/2024
 
Attention: Amith Vijaykumar , Electrical Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX46WFBTA
Name of Grantee:  Swivl
Equipment Class: Part 15 Class B Digital Device
Notes: Turbox C610 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application skVbPDtztOJQrqgV6w81XA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/23/2024

Application Dated: 01/23/2024
Swivl
1450 El Camino Real
Menlo Park, CA 94025
 
Attention: Amith Vijaykumar , Electrical Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX46WFBTA
Name of Grantee:  Swivl
Equipment Class: Digital Transmission System
Notes: Turbox C610 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  
CC 15C 2412.0  -  2462.0 0.058  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application skVbPDtztOJQrqgV6w81XA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Swivl
1450 El Camino Real
Menlo Park, CA 94025
United States
  Date of Grant: 01/23/2024

Application Dated: 01/23/2024
 
Attention: Amith Vijaykumar , Electrical Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX46WFBTA
Name of Grantee:  Swivl
Equipment Class: Digital Transmission System
Notes: Turbox C610 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  
CC 15C 2412.0  -  2462.0 0.058  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JiR4vfsPFu0hOrtPizHpNQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/23/2024

Application Dated: 01/23/2024
Swivl
1450 El Camino Real
Menlo Park, CA 94025
 
Attention: Amith Vijaykumar , Electrical Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX46WFBTA
Name of Grantee:  Swivl
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Turbox C610 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC ND 15E 5260.0  -  5320.0 0.031  
CC ND 15E 5500.0  -  5720.0 0.031  
CC 15E 5745.0  -  5825.0 0.029  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application JiR4vfsPFu0hOrtPizHpNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Swivl
1450 El Camino Real
Menlo Park, CA 94025
United States
  Date of Grant: 01/23/2024

Application Dated: 01/23/2024
 
Attention: Amith Vijaykumar , Electrical Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX46WFBTA
Name of Grantee:  Swivl
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Turbox C610 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC ND 15E 5260.0  -  5320.0 0.031  
CC ND 15E 5500.0  -  5720.0 0.031  
CC 15E 5745.0  -  5825.0 0.029  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 6sn9U7SL0wsdBLJ0OdiwaQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/23/2024

Application Dated: 01/23/2024
Swivl
1450 El Camino Real
Menlo Park, CA 94025
 
Attention: Amith Vijaykumar , Electrical Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX46WFBTA
Name of Grantee:  Swivl
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Turbox C610 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6sn9U7SL0wsdBLJ0OdiwaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Swivl
1450 El Camino Real
Menlo Park, CA 94025
United States
  Date of Grant: 01/23/2024

Application Dated: 01/23/2024
 
Attention: Amith Vijaykumar , Electrical Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX46WFBTA
Name of Grantee:  Swivl
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Turbox C610 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: