FCC ID 2AX63FF-CDP001-P2
On-site Command and Dispatch Center
by Guangdong BYD Energy-saving Technology Co., Ltd.
Grantee Code: 2AX63 Product Code: FFCDP001P2
Latest application date: 2021-02-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2021-02-27 |
| 700.5-714.5 MHz | Original Equipment | 2021-02-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2021-02-27 | PDF 1.2 MB |
| User manual | Users Manual | 2021-02-27 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2021-02-27 | PDF 1.8 MB |
| External Photos | External Photos | 2021-02-27 | PDF 271.2 KB |
| Label & Location | ID Label/Location Info | 2021-02-27 | PDF 41.5 KB |
| Test Setup Photos | Test Setup Photos | 2021-02-27 | PDF 175.7 KB |
| Test Report | Test Report | 2021-02-27 | PDF 2.8 MB |
| Test Report part 1 | Test Report | 2021-02-27 | PDF 5 MB |
| Test Report part 2 | Test Report | 2021-02-27 | PDF 1.5 MB |
| Attestation Letter | Attestation Statements | 2021-02-27 | PDF 54.6 KB |
| FCC Long Term Confidential Authorization Form | Cover Letter(s) | 2021-02-27 | PDF 74.8 KB |
| RF Exposure | RF Exposure Info | 2021-02-27 | PDF 54.1 KB |
| RF Exposure | RF Exposure Info | 2021-02-27 | PDF 54 KB |
| Block Diagram Metadata only | Block Diagram | PDF 225.8 KB | |
| Schematics Metadata only | Schematics | PDF 2.4 MB | |
| Circuit Description Metadata only | Operational Description | PDF 2 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 297.9 KB | |
| Tune-up Procedure Metadata only | Parts List/Tune Up Info | PDF 213.4 KB |
Application Information
| Application ID | Wjvo4DMRdZG/J98Dhva7Aw== |
|---|---|
| Final Action Date | 2021-02-27 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0030186472 |
| Model | FF-CDP001-P2 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | On-site Command and Dispatch Center |
| Responsible Party | Junhua Ying, Project Director, ying.junhua@byd.com |
| Test Firm | Well Wang, Bay Area Compliance Laboratories Corp. (Shenzhen), qa.sz@baclcorp.com |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Wjvo4DMRdZG/J98Dhva7Aw== | 2021-02-27 | Original Equipment |
| BgPhpyFqlm+JTUslyjL7mg== | 2021-02-27 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 700.5-714.5 MHz | 0.11 | 2.5ppm | 2M70G7D | 27 |
| 700.5-714.5 MHz | 0.11 | 2.5ppm | 2M70D7W | 27 |
| 704-711 MHz | 0.104 | 2.5ppm | 8M97G7D | 27 |
| 704-711 MHz | 0.104 | 2.5ppm | 8M97D7W | 27 |
| 706.5-713.5 MHz | 0.104 | 2.5ppm | 4M56G7D | 27 |
| 706.5-713.5 MHz | 0.104 | 2.5ppm | 4M56D7W | 27 |
| 709-711 MHz | 0.104 | 2.5ppm | 8M97G7D | 27 |
| 709-711 MHz | 0.104 | 2.5ppm | 8M97D7W | 27 |
| 779.5-784.5 MHz | 0.103 | 2.5ppm | 4M54G7D | 27 |
| 779.5-784.5 MHz | 0.103 | 2.5ppm | 4M54D7W | 27 |
| 782 MHz | 0.099 | 2.5ppm | 8M96G7D | 27 |
| 782 MHz | 0.099 | 2.5ppm | 8M96D7W | 27 |
| 829-844 MHz | 0.088 | 2.5ppm | 8M96G7D | 22H |
| 829-844 MHz | 0.088 | 2.5ppm | 8M96D7W | 22H |
| 1710.7-1754.3 MHz | 0.184 | 2.5ppm | 1M11G7D | 27 |
| 1710.7-1754.3 MHz | 0.184 | 2.5ppm | 1M11D7W | 27 |
| 1712.4-1752.6 MHz | 0.147 | 2.5ppm | 4M18F9W | 27 |
| 1720-1745 MHz | 0.169 | 2.5ppm | 18M0G7D | 27 |
| 1720-1745 MHz | 0.169 | 2.5ppm | 18M0D7W | 27 |
| 1860-1900 MHz | 0.171 | 2.5ppm | 18M0G7D | 24E |
| 1860-1900 MHz | 0.171 | 2.5ppm | 18M0D7W | 24E |
| 2412-2462 MHz | 0.0420000 | 15C | ||
| 2510-2560 MHz | 0.138 | 2.5ppm | 18M0G7D | 27 |
| 2510-2560 MHz | 0.138 | 2.5ppm | 18M0D7W | 27 |
Grants
TCB Grant - Application Wjvo4DMRdZG/J98Dhva7Aw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 02/27/2021 Application Dated: 02/27/2021 |
| Guangdong BYD Energy-saving Technology Co., Ltd. |
| BYD Industrial Park, Xiangshui River, Daya Bay |
| Huizhou, Guangdong, China |
| Attention: Junhua Ying , Project Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AX63FF-CDP001-P2 |
| Name of Grantee: | Guangdong BYD Energy-saving Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | On-site Command and Dispatch Center |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.042 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application Wjvo4DMRdZG/J98Dhva7Aw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangdong BYD Energy-saving Technology Co., Ltd. BYD Industrial Park, Xiangshui River, Daya Bay Huizhou, Guangdong, China |
Date of Grant: 02/27/2021 Application Dated: 02/27/2021 |
| Attention: Junhua Ying , Project Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AX63FF-CDP001-P2 |
| Name of Grantee: | Guangdong BYD Energy-saving Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | On-site Command and Dispatch Center |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.042 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 02/27/2021 Application Dated: 02/27/2021 |
| Guangdong BYD Energy-saving Technology Co., Ltd. |
| BYD Industrial Park, Xiangshui River, Daya Bay |
| Huizhou, Guangdong, China |
| Attention: Junhua Ying , Project Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AX63FF-CDP001-P2 |
| Name of Grantee: | Guangdong BYD Energy-saving Technology Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | On-site Command and Dispatch Center |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.104 | 2.5 PM | 4M18F9W | |
| 24E | 1852.4 - 1907.6 | 0.163 | 2.5 PM | 4M18F9W | |
| 27 | 1712.4 - 1752.6 | 0.147 | 2.5 PM | 4M18F9W | |
| 24E | 1860.0 - 1900.0 | 0.171 | 2.5 PM | 18M0G7D | |
| 24E | 1860.0 - 1900.0 | 0.171 | 2.5 PM | 18M0D7W | |
| 27 | 1710.7 - 1754.3 | 0.184 | 2.5 PM | 1M11G7D | |
| 27 | 1710.7 - 1754.3 | 0.184 | 2.5 PM | 1M11D7W | |
| 27 | 1720.0 - 1745.0 | 0.169 | 2.5 PM | 18M0G7D | |
| 27 | 1720.0 - 1745.0 | 0.169 | 2.5 PM | 18M0D7W | |
| 22H | 829.0 - 844.0 | 0.088 | 2.5 PM | 8M96G7D | |
| 22H | 829.0 - 844.0 | 0.088 | 2.5 PM | 8M96D7W | |
| 27 | 2510.0 - 2560.0 | 0.138 | 2.5 PM | 18M0G7D | |
| 27 | 2510.0 - 2560.0 | 0.138 | 2.5 PM | 18M0D7W | |
| 27 | 700.5 - 714.5 | 0.11 | 2.5 PM | 2M70G7D | |
| 27 | 700.5 - 714.5 | 0.11 | 2.5 PM | 2M70D7W | |
| 27 | 704.0 - 711.0 | 0.104 | 2.5 PM | 8M97G7D | |
| 27 | 704.0 - 711.0 | 0.104 | 2.5 PM | 8M97D7W | |
| 27 | 779.5 - 784.5 | 0.103 | 2.5 PM | 4M54G7D | |
| 27 | 779.5 - 784.5 | 0.103 | 2.5 PM | 4M54D7W | |
| 27 | 782.0 - 782.0 | 0.099 | 2.5 PM | 8M96G7D | |
| 27 | 782.0 - 782.0 | 0.099 | 2.5 PM | 8M96D7W | |
| 27 | 706.5 - 713.5 | 0.104 | 2.5 PM | 4M56G7D | |
| 27 | 706.5 - 713.5 | 0.104 | 2.5 PM | 4M56D7W | |
| 27 | 709.0 - 711.0 | 0.104 | 2.5 PM | 8M97G7D | |
| 27 | 709.0 - 711.0 | 0.104 | 2.5 PM | 8M97D7W |
| Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4, 1.4/3/5/10 MHz BW modes in Band 5/12, 5/10/15/20 MHz BW modes in Band 7, and 5/10 MHz BW modes in Band 13/17. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. |
EAS Grant - Application BgPhpyFqlm+JTUslyjL7mg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangdong BYD Energy-saving Technology Co., Ltd. BYD Industrial Park, Xiangshui River, Daya Bay Huizhou, Guangdong, China |
Date of Grant: 02/27/2021 Application Dated: 02/27/2021 |
| Attention: Junhua Ying , Project Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AX63FF-CDP001-P2 |
| Name of Grantee: | Guangdong BYD Energy-saving Technology Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | On-site Command and Dispatch Center |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.104 | 2.5 PM | 4M18F9W | |
| 24E | 1852.4 - 1907.6 | 0.163 | 2.5 PM | 4M18F9W | |
| 27 | 1712.4 - 1752.6 | 0.147 | 2.5 PM | 4M18F9W | |
| 24E | 1860.0 - 1900.0 | 0.171 | 2.5 PM | 18M0G7D | |
| 24E | 1860.0 - 1900.0 | 0.171 | 2.5 PM | 18M0D7W | |
| 27 | 1710.7 - 1754.3 | 0.184 | 2.5 PM | 1M11G7D | |
| 27 | 1710.7 - 1754.3 | 0.184 | 2.5 PM | 1M11D7W | |
| 27 | 1720.0 - 1745.0 | 0.169 | 2.5 PM | 18M0G7D | |
| 27 | 1720.0 - 1745.0 | 0.169 | 2.5 PM | 18M0D7W | |
| 22H | 829.0 - 844.0 | 0.088 | 2.5 PM | 8M96G7D | |
| 22H | 829.0 - 844.0 | 0.088 | 2.5 PM | 8M96D7W | |
| 27 | 2510.0 - 2560.0 | 0.138 | 2.5 PM | 18M0G7D | |
| 27 | 2510.0 - 2560.0 | 0.138 | 2.5 PM | 18M0D7W | |
| 27 | 700.5 - 714.5 | 0.11 | 2.5 PM | 2M70G7D | |
| 27 | 700.5 - 714.5 | 0.11 | 2.5 PM | 2M70D7W | |
| 27 | 704.0 - 711.0 | 0.104 | 2.5 PM | 8M97G7D | |
| 27 | 704.0 - 711.0 | 0.104 | 2.5 PM | 8M97D7W | |
| 27 | 779.5 - 784.5 | 0.103 | 2.5 PM | 4M54G7D | |
| 27 | 779.5 - 784.5 | 0.103 | 2.5 PM | 4M54D7W | |
| 27 | 782.0 - 782.0 | 0.099 | 2.5 PM | 8M96G7D | |
| 27 | 782.0 - 782.0 | 0.099 | 2.5 PM | 8M96D7W | |
| 27 | 706.5 - 713.5 | 0.104 | 2.5 PM | 4M56G7D | |
| 27 | 706.5 - 713.5 | 0.104 | 2.5 PM | 4M56D7W | |
| 27 | 709.0 - 711.0 | 0.104 | 2.5 PM | 8M97G7D | |
| 27 | 709.0 - 711.0 | 0.104 | 2.5 PM | 8M97D7W |
| Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4, 1.4/3/5/10 MHz BW modes in Band 5/12, 5/10/15/20 MHz BW modes in Band 7, and 5/10 MHz BW modes in Band 13/17. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. |
| Mail To: |