FCC ID 2AX94-MFD-10S-T
Thermal Security System
by Shenzhen Qunan Electronic Technology Co. , Ltd
Grantee Code: 2AX94 Product Code: MFD10ST
Latest application date: 2020-12-09
FCC ID Device Details
| FCC ID | 2AX94-MFD-10S-T |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AX94 |
| Product Code | MFD10ST |
| Applicant Business | Shenzhen Qunan Electronic Technology Co. , Ltd 🇨🇳 |
| Equipment Class | Thermal Security System |
| Test Firm | Shenzhen Toby Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AX45-SAFETEC Grant Date: 11/13/2020 | 2020-12-09 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AX45-SAFETEC Grant Date: 11/13/2020 | 2020-12-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External_Photos | External Photos | 2020-12-09 | PDF 457.9 KB |
| Label and Label Location | ID Label/Location Info | 2020-12-09 | PDF 403 KB |
| Lable | ID Label/Location Info | 2020-12-09 | PDF 403 KB |
| FCC Authorization from Original Grantee for ID change | Cover Letter(s) | 2020-12-09 | PDF 92 KB |
| FCC Request for change in ID Rev 2 | Cover Letter(s) | 2020-12-09 | PDF 98.6 KB |
| Letter_of_Authorization | Cover Letter(s) | 2020-12-09 | PDF 118 KB |
| Model difference statement | Cover Letter(s) | 2020-12-09 | PDF 231.4 KB |
Application Information
| Application ID | kMUZbvwshTj68lxkNLR5Lg== |
|---|---|
| Final Action Date | 2020-12-09 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2AX45-SAFETEC Grant Date: 11/13/2020 |
| Applicant FRN | 0030224869 |
| Model | MFD-10S-T |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Thermal Security System |
| Responsible Party | Qiusheng Fu, qunan1688@outlook.com  , 18929567077 |
| Technical Contact | Shenzhen Qunan Electronic Technology Co. , Ltd., qunan1688@outlook.com |
| Test Firm | Ray Lai, Shenzhen Toby Technology Co., Ltd., toby857@tongbiao.com  , --- |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| kMUZbvwshTj68lxkNLR5Lg== | 2020-12-09 | Change in identification of presently authorized equipment. Original FCC ID: 2AX45-SAFETEC Grant Date: 11/13/2020 |
| Xa4MqA4EUBm8/1Y/JzHQHA== | 2020-12-09 | Change in identification of presently authorized equipment. Original FCC ID: 2AX45-SAFETEC Grant Date: 11/13/2020 |
Equipment Authorization
Grants
TCB Grant - Application Xa4MqA4EUBm8/1Y/JzHQHA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/09/2020 Application Dated: 12/09/2020 |
| Shenzhen Qunan Electronic Technology Co. , Ltd |
| Room 401, No. 1318, Xinwei, Liguang Community, |
| Guanlan Street, Longhua District |
| ShenZhen, China |
| Attention: Qiusheng Fu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AX94-MFD-10S-T |
| Name of Grantee: | Shenzhen Qunan Electronic Technology Co. , Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Thermal Security System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0075 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Xa4MqA4EUBm8/1Y/JzHQHA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Qunan Electronic Technology Co. , Ltd Room 401, No. 1318, Xinwei, Liguang Community, Guanlan Street, Longhua District ShenZhen, China |
Date of Grant: 12/09/2020 Application Dated: 12/09/2020 |
| Attention: Qiusheng Fu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AX94-MFD-10S-T |
| Name of Grantee: | Shenzhen Qunan Electronic Technology Co. , Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Thermal Security System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0075 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/09/2020 Application Dated: 12/09/2020 |
| Shenzhen Qunan Electronic Technology Co. , Ltd |
| Room 401, No. 1318, Xinwei, Liguang Community, |
| Guanlan Street, Longhua District |
| ShenZhen, China |
| Attention: Qiusheng Fu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AX94-MFD-10S-T |
| Name of Grantee: | Shenzhen Qunan Electronic Technology Co. , Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Thermal Security System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0537 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application kMUZbvwshTj68lxkNLR5Lg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Qunan Electronic Technology Co. , Ltd Room 401, No. 1318, Xinwei, Liguang Community, Guanlan Street, Longhua District ShenZhen, China |
Date of Grant: 12/09/2020 Application Dated: 12/09/2020 |
| Attention: Qiusheng Fu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AX94-MFD-10S-T |
| Name of Grantee: | Shenzhen Qunan Electronic Technology Co. , Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Thermal Security System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0537 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |