1. FCC ID
  2. 2AXDW
  3. 2AXDW-BL100

FCC ID 2AXDW-BL100

BellaBot

by SHENZHEN PUDU TECHNOLOGY CO., LTD.

Grantee Code: 2AXDW   Product Code: BL100
Latest application date: 2020-09-09

FCC ID Device Details

FCC ID2AXDW-BL100
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AXDW
Product CodeBL100
Applicant BusinessSHENZHEN PUDU TECHNOLOGY CO., LTD. 🇨🇳
Related Domains pudutech.com
Equipment ClassBellaBot
Test FirmShenzhen NTEK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-09-09
2402-2480 MHzOriginal Equipment2020-09-09
5180-5240 MHzOriginal Equipment2020-09-09

Exhibits

DocumentTypeAvailableFile
User_ManualUsers Manual2020-09-09PDF 3.3 MB
User_manualUsers Manual2020-09-09PDF 3.3 MB
Internal_PhotosInternal Photos2020-09-09PDF 4.3 MB
Internal_photosInternal Photos2020-09-09PDF 4.3 MB
EXT_PHOTOExternal Photos2020-09-09PDF 587.8 KB
External_PhotosExternal Photos2020-09-09PDF 587.8 KB
External_photosExternal Photos2020-09-09PDF 587.8 KB
LabelID Label/Location Info2020-09-09PDF 245.9 KB
labelID Label/Location Info2020-09-09PDF 245.9 KB
Test_Setup_PhotosTest Setup Photos2020-09-09PDF 282 KB
Test_Setup_PhotosTest Setup Photos2020-09-09PDF 539.2 KB
S20061602406001-EDRTest Report2020-09-09PDF 3.4 MB
S20061602406002-BLETest Report2020-09-09PDF 2.2 MB
S20061602406003-2.4GWIFI-MIMO-1Test Report2020-09-09PDF 5.9 MB
S20061602406003-2.4GWIFI-MIMO-2Test Report2020-09-09PDF 4.5 MB
S20061602406004-5GWIFI With DFS-1Test Report2020-09-09PDF 6 MB
S20061602406004-5GWIFI With DFS-2Test Report2020-09-09PDF 5.7 MB
S20061602406004-5GWIFI With DFS-3Test Report2020-09-09PDF 5.8 MB
S20061602406004-5GWIFI With DFS-4Test Report2020-09-09PDF 5.1 MB
S20061602406004-5GWIFI With DFS-5Test Report2020-09-09PDF 5 MB
SDoC Attestation LetterCover Letter(s)2020-09-09PDF 387.5 KB
FCC Software Configuration Control DeclarationCover Letter(s)2020-09-09PDF 64.5 KB
FCC_Long_Term_Only_ConfidentialityCover Letter(s)2020-09-09PDF 101.1 KB
FCC_Short_&_Long_Term_ConfidentialityCover Letter(s)2020-09-09PDF 101.1 KB
FCC_Short_&_Long_Term_Confidentiality_RequestCover Letter(s)2020-09-09PDF 101.1 KB
Family models declaration letterCover Letter(s)2020-09-09PDF 111.4 KB
Sample_Letter_of_AuthorizationCover Letter(s)2020-09-09PDF 14 KB
family models declaration letterCover Letter(s)2020-09-09PDF 111.4 KB
MPERF Exposure Info2020-09-09PDF 277.1 KB
Block_Diagram Metadata onlyBlock DiagramPDF 193 KB
block_diagram Metadata onlyBlock DiagramPDF 193 KB
SCH Metadata onlySchematicsPDF 1.3 MB
Schematic Metadata onlySchematicsPDF 1.3 MB
Operation-Description Metadata onlyOperational DescriptionPDF 349.3 KB
SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES Metadata onlySDR Software/Security InfPDF 2.2 MB

Application Information

Application IDC5MJpal7sUjoRn3t7msGwQ==
Final Action Date2020-09-09
Application PurposeOriginal Equipment
Applicant FRN0027117696
ModelBL100
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionBellaBot
Responsible PartyLe Cai, caile@pudutech.com , 0755-26909874
Technical ContactSHENZHEN PUDU TECHNOLOGY CO., LTD., niangeng@pudutech.com
Test FirmAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., certification@ntek.org.cn , +86-755-6115-9384
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
C5MJpal7sUjoRn3t7msGwQ==2020-09-09Original Equipment
1xedEIxIoa2geUamr9KfjA==2020-09-09Original Equipment
+82zcO19T7sBrpXcVLug5w==2020-09-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.000920015CCC
2402-2480 MHz0.00118115CCC
2412-2462 MHz0.03126115CCC, MO
5180-5240 MHz0.01862115E38, CC, MO
5260-5320 MHz0.01949815E38, CC, MO, ND
5500-5700 MHz0.01823915E38, CC, MO, ND
5745-5825 MHz0.01674915E38, CC, MO

Grants

TCB Grant - Application C5MJpal7sUjoRn3t7msGwQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 09/09/2020

Application Dated: 09/09/2020
SHENZHEN PUDU TECHNOLOGY CO., LTD.
Room 501, Building A, Block 1, Phase 1, Shenzhen
International Inno Valley, Dashi 1st Road,
Nanshan District, Shenzhen,, 518057
China
 
Attention: Le Cai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXDW-BL100
Name of Grantee:  SHENZHEN PUDU TECHNOLOGY CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BellaBot
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00092  

Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application C5MJpal7sUjoRn3t7msGwQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

SHENZHEN PUDU TECHNOLOGY CO., LTD.
Room 501, Building A, Block 1, Phase 1, Shenzhen International Inno Valley, Dashi 1st Road,
Nanshan District, Shenzhen,, 518057
China 		  Date of Grant: 09/09/2020

Application Dated: 09/09/2020
 
Attention: Le Cai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXDW-BL100
Name of Grantee:  SHENZHEN PUDU TECHNOLOGY CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BellaBot
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00092  

Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 1xedEIxIoa2geUamr9KfjA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 09/09/2020

Application Dated: 09/09/2020
SHENZHEN PUDU TECHNOLOGY CO., LTD.
Room 501, Building A, Block 1, Phase 1, Shenzhen
International Inno Valley, Dashi 1st Road,
Nanshan District, Shenzhen,, 518057
China
 
Attention: Le Cai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXDW-BL100
Name of Grantee:  SHENZHEN PUDU TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: BellaBot
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.031261  
CC 15C 2402.0  -  2480.0 0.001181  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 1xedEIxIoa2geUamr9KfjA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

SHENZHEN PUDU TECHNOLOGY CO., LTD.
Room 501, Building A, Block 1, Phase 1, Shenzhen International Inno Valley, Dashi 1st Road,
Nanshan District, Shenzhen,, 518057
China 		  Date of Grant: 09/09/2020

Application Dated: 09/09/2020
 
Attention: Le Cai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXDW-BL100
Name of Grantee:  SHENZHEN PUDU TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: BellaBot
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.031261  
CC 15C 2402.0  -  2480.0 0.001181  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application +82zcO19T7sBrpXcVLug5w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 09/09/2020

Application Dated: 09/09/2020
SHENZHEN PUDU TECHNOLOGY CO., LTD.
Room 501, Building A, Block 1, Phase 1, Shenzhen
International Inno Valley, Dashi 1st Road,
Nanshan District, Shenzhen,, 518057
China
 
Attention: Le Cai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXDW-BL100
Name of Grantee:  SHENZHEN PUDU TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BellaBot
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.018621  
38 CC MO ND 15E 5260.0  -  5320.0 0.019498  
38 CC MO ND 15E 5500.0  -  5700.0 0.018239  
38 CC MO 15E 5745.0  -  5825.0 0.016749  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application +82zcO19T7sBrpXcVLug5w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

SHENZHEN PUDU TECHNOLOGY CO., LTD.
Room 501, Building A, Block 1, Phase 1, Shenzhen International Inno Valley, Dashi 1st Road,
Nanshan District, Shenzhen,, 518057
China 		  Date of Grant: 09/09/2020

Application Dated: 09/09/2020
 
Attention: Le Cai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXDW-BL100
Name of Grantee:  SHENZHEN PUDU TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BellaBot
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.018621  
38 CC MO ND 15E 5260.0  -  5320.0 0.019498  
38 CC MO ND 15E 5500.0  -  5700.0 0.018239  
38 CC MO 15E 5745.0  -  5825.0 0.016749  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: