FCC ID 2AXH6-K2PLUS
3D Printer
by Shenzhen Creality 3D Technology Co.,Ltd.
Grantee Code: 2AXH6 Product Code: K2PLUS
Latest application date: 2024-08-14
FCC ID Device Details
| FCC ID | 2AXH6-K2PLUS |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AXH6 |
| Product Code | K2PLUS |
| Applicant Business | Shenzhen Creality 3D Technology Co.,Ltd. 🇨🇳 |
| Related Domains |  creality.com |
| Equipment Class | 3D Printer |
| Test Firm | Shenzhen BCTC Testing Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2024-08-14 |
| 13.56 MHz | Original Equipment | 2024-08-14 |
| 5180-5240 MHz | Original Equipment | 2024-08-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2024-08-14 | PDF 5.4 MB |
| Internal Photos | Internal Photos | 2024-08-14 | PDF 4.5 MB |
| External Photos | External Photos | 2024-08-14 | PDF 661.5 KB |
| ID Label/Location Info | ID Label/Location Info | 2024-08-14 | PDF 202.6 KB |
| Test Setup Photos | Test Setup Photos | 2024-08-14 | PDF 349.7 KB |
| ANT Test Report | Test Report | 2024-08-14 | PDF 554.6 KB |
| ANT Test Report | Test Report | 2024-08-14 | PDF 1.2 MB |
| Test Report | Test Report | 2024-08-14 | PDF 1.4 MB |
| Test Report | Test Report | 2024-08-14 | PDF 5.3 MB |
| Test Report | Test Report | 2024-08-14 | PDF 4.2 MB |
| Attestation Statements 1 | Attestation Statements | 2024-08-14 | PDF 331.9 KB |
| Attestation Statements 2 | Attestation Statements | 2024-08-14 | PDF 316 KB |
| US agent | Attestation Statements | 2024-08-14 | PDF 1.1 MB |
| Agent Authorization | Cover Letter(s) | 2024-08-14 | PDF 137.7 KB |
| Long term Confidentiality Letter | Cover Letter(s) | 2024-08-14 | PDF 138.9 KB |
| RF Exposure Info | RF Exposure Info | 2024-08-14 | PDF 321.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 53.6 KB | |
| Schematics Metadata only | Schematics | PDF 4.5 MB | |
| Operational Description Metadata only | Operational Description | PDF 119 KB | |
| SDR Software/Security Info Metadata only | SDR Software/Security Info. | PDF 258.1 KB |
Application Information
| Application ID | tRD7fVamHHym6wC7lBitqw== |
|---|---|
| Final Action Date | 2024-08-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029955358 |
| Model | K2PLUS |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 3D Printer |
| Responsible Party | Lucy Li, Safety enginner, liyulu@creality.com , 13410218975 |
| Test Firm | Sally He, Shenzhen BCTC Testing Co., Ltd., andy.yuan@bctc-lab.com.cn  , 15999690624 |
| TCB Email | tcbinfo@metlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. The device supports 20MHz, 40MHz and 80MHz bandwidths. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| tRD7fVamHHym6wC7lBitqw== | 2024-08-14 | Original Equipment |
| bcG1gZ78Q7ZbmyaMYnL9xA== | 2024-08-14 | Original Equipment |
| IqEyU4TPSD0m62VKlF1/lw== | 2024-08-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application tRD7fVamHHym6wC7lBitqw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 08/14/2024 Application Dated: 08/14/2024 |
| Shenzhen Creality 3D Technology Co.,Ltd. |
| 18F, JinXiuHongDu Building, Meilong Blvd., |
| Longhua Dist., Shenzhen,, 518131 China |
| Attention: Lucy Li , Safety enginner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXH6-K2PLUS |
| Name of Grantee: | Shenzhen Creality 3D Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.045 |
| Output power listed is conducted. The device supports 20MHz, 40MHz and 80MHz bandwidths. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tRD7fVamHHym6wC7lBitqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Creality 3D Technology Co.,Ltd. 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,, 518131 China |
Date of Grant: 08/14/2024 Application Dated: 08/14/2024 |
| Attention: Lucy Li , Safety enginner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXH6-K2PLUS |
| Name of Grantee: | Shenzhen Creality 3D Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.045 |
| Output power listed is conducted. The device supports 20MHz, 40MHz and 80MHz bandwidths. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 08/14/2024 Application Dated: 08/14/2024 |
| Shenzhen Creality 3D Technology Co.,Ltd. |
| 18F, JinXiuHongDu Building, Meilong Blvd., |
| Longhua Dist., Shenzhen,, 518131 China |
| Attention: Lucy Li , Safety enginner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXH6-K2PLUS |
| Name of Grantee: | Shenzhen Creality 3D Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.16 |
| Output power listed is conducted. The device supports 20MHz, 40MHz and 80MHz bandwidths. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application IqEyU4TPSD0m62VKlF1/lw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Creality 3D Technology Co.,Ltd. 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,, 518131 China |
Date of Grant: 08/14/2024 Application Dated: 08/14/2024 |
| Attention: Lucy Li , Safety enginner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXH6-K2PLUS |
| Name of Grantee: | Shenzhen Creality 3D Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.16 |
| Output power listed is conducted. The device supports 20MHz, 40MHz and 80MHz bandwidths. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 08/14/2024 Application Dated: 08/14/2024 |
| Shenzhen Creality 3D Technology Co.,Ltd. |
| 18F, JinXiuHongDu Building, Meilong Blvd., |
| Longhua Dist., Shenzhen,, 518131 China |
| Attention: Lucy Li , Safety enginner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXH6-K2PLUS |
| Name of Grantee: | Shenzhen Creality 3D Technology Co.,Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application bcG1gZ78Q7ZbmyaMYnL9xA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Creality 3D Technology Co.,Ltd. 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,, 518131 China |
Date of Grant: 08/14/2024 Application Dated: 08/14/2024 |
| Attention: Lucy Li , Safety enginner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXH6-K2PLUS |
| Name of Grantee: | Shenzhen Creality 3D Technology Co.,Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |