FCC ID 2AXJ4AP9778

BE22000 Ceiling Mount Wi-Fi 7 Access Point

by TP-Link Corporation Limited

Grantee Code: 2AXJ4   Product Code: AP9778
Latest application date: 2023-10-03

FCC ID Device Details

FCC ID2AXJ4AP9778
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AXJ4
Product CodeAP9778
Applicant BusinessTP-Link Corporation Limited
Related Domains tp-link.com
Equipment ClassBE22000 Ceiling Mount Wi-Fi 7 Access Point
Test FirmUL Verification Services (Guangzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2023-10-03
6115-7095 MHzOriginal Equipment2023-10-03
2412-2462 MHzOriginal Equipment2023-10-03

Exhibits

DocumentTypeAvailableFile
user manual R1Users Manual2023-10-03PDF 1.9 MB
EUTPhoto_InternalInternal Photos2023-10-03PDF 1.3 MB
EUTPhoto_External R1External Photos2023-10-03PDF 514.1 KB
label and label locationID Label/Location Info2023-10-03PDF 665.5 KB
DFS Setup PhotoTest Setup Photos2023-10-03PDF 224.2 KB
Setup PhotoTest Setup Photos2023-10-03PDF 603 KB
4790887256-1-RF-1-BLE FCC ISEDTest Report2023-10-03PDF 3.5 MB
4790887256-1-RF-2-WIFI 2.4G FCC ISED R1_Part1Test Report2023-10-03PDF 4.8 MB
4790887256-1-RF-2-WIFI 2.4G FCC ISED R1_Part2Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-2-WIFI 2.4G FCC ISED R1_Part3Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-2-WIFI 2.4G FCC ISED R1_Part4Test Report2023-10-03PDF 5 MB
4790887256-1-RF-2-WIFI 2.4G FCC ISED R1_Part5Test Report2023-10-03PDF 747.6 KB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part1Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part10Test Report2023-10-03PDF 1.7 MB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part2Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part3Test Report2023-10-03PDF 4.8 MB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part4Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part5Test Report2023-10-03PDF 5 MB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part6Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part7Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part8Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-3-WIFI 5G FCC ISED R1_Part9Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part1Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part10Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part11Test Report2023-10-03PDF 5 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part12Test Report2023-10-03PDF 5 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part13Test Report2023-10-03PDF 4.3 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part2Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part3Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part4Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part5Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part6Test Report2023-10-03PDF 4.9 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part7Test Report2023-10-03PDF 5 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part8Test Report2023-10-03PDF 5 MB
4790887256-1-RF-4-WIFI 6G FCC ISED R1_Part9Test Report2023-10-03PDF 4.8 MB
4790887256-1-RF-7_ DFS ReportTest Report2023-10-03PDF 5 MB
anetanna specification R1Test Report2023-10-03PDF 748.1 KB
ACB-FORM-FCC-Application-Letters-Covered-List-AttestationAttestation Statements2023-10-03PDF 296.1 KB
ACB-FORM-FCC-Application-Letters-U.S.-Agent-Letter-for-Service-of-Process-4.13Attestation Statements2023-10-03PDF 26.9 KB
Outdoor-FCC Attestation LetterAttestation Statements2023-10-03PDF 428.3 KB
ACB-FORM-FCC-Application-Letters-Confidentiality-LetterCover Letter(s)2023-10-03PDF 387.8 KB
Declaration of Frequency StabilityCover Letter(s)2023-10-03PDF 422.3 KB
FCC Declaration of ConformityCover Letter(s)2023-10-03PDF 423.2 KB
Letter of Declaration on Indoor Access Point 6ID Operation R1Cover Letter(s)2023-10-03PDF 737.2 KB
Non-SDR letterCover Letter(s)2023-10-03PDF 527 KB
PAG Check listCover Letter(s)2023-10-03PDF 4.9 MB
4790887256-1-RF-5_FCC MPE Report Metadata onlyRF Exposure Info2023-10-03PDF 236 KB
4790887256-1-RF-5_FCC MPE Report R2RF Exposure Info2023-10-03PDF 233.8 KB
block daigram Metadata onlyBlock DiagramPDF 208.2 KB
schematics Metadata onlySchematicsPDF 1.7 MB
Operation Description R1 Metadata onlyOperational DescriptionPDF 153 KB
PAG Check list Metadata onlyOperational DescriptionPDF 4.9 MB
Letter of Declaration on Indoor Access Point 6ID Operation R1 Metadata onlySDR Software/Security InfPDF 737.2 KB
Software Security Requirements Cover Letter Metadata onlySDR Software/Security InfPDF 278.1 KB

Application Information

Application IDys7j/xE54Q5hj8Ra1htkqg==
Final Action Date2023-10-03
Application PurposeOriginal Equipment
Applicant FRN0029962685
ModelAP9778
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionBE22000 Ceiling Mount Wi-Fi 7 Access Point
Responsible PartySarah Wang, certification@tp-link.com , 00852-37585503
Technical Contactvicky Gao, UL Verification Services (Guangzhou) Co., Ltd, Son, vicky.gao@ul.com , +86 0769-33817138
Test FirmStephen Guo, UL Verification Services (Guangzhou) Co., Ltd., Stephen.guo@ul.com , +86 0769 33817120
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower Output listed is conducted. Device is an 802.11a/n/ac/ax/be device in a 2x2 MIMO configuration as described in this filing. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 240 MHz bandwidth modes at 5 GHz WLAN. It also contains BLE, 2.4GHz/6GHz WLAN transmitter.

Applications

Application IDDatePurpose
ys7j/xE54Q5hj8Ra1htkqg==2023-10-03Original Equipment
e9zqkd4N8TjBdl0SYBVsTQ==2023-10-03Original Equipment
ZcsV2V/R67LKAY8f2zFT8g==2023-10-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.051415CCC
2412-2462 MHz0.87915CCC, MO
5180-5240 MHz0.97315ECC, MO
5250 MHz0.085315ECC, MO, ND
5260-5320 MHz0.23415ECC, MO, ND
5500-5720 MHz0.2515ECC, MO, ND
5745-5825 MHz0.95915ECC, MO
6115-7095 MHz0.349000015ECC, EP, MO

Grants

TCB Grant - Application ZcsV2V/R67LKAY8f2zFT8g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 10/03/2023

Application Dated: 09/10/2023
TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre,
9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AP9778
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Digital Transmission System
Notes: BE22000 Ceiling Mount Wi-Fi 7 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0514  
CC MO 15C 2412.0  -  2462.0 0.879  

Output power listed is conducted. Device is a 802.11 b/g/n/ax/be device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

This device contains a 5GHz/6GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ZcsV2V/R67LKAY8f2zFT8g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 10/03/2023

Application Dated: 09/10/2023
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AP9778
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Digital Transmission System
Notes: BE22000 Ceiling Mount Wi-Fi 7 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0514  
CC MO 15C 2412.0  -  2462.0 0.879  

Output power listed is conducted. Device is a 802.11 b/g/n/ax/be device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

This device contains a 5GHz/6GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ys7j/xE54Q5hj8Ra1htkqg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 10/03/2023

Application Dated: 09/10/2023
TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre,
9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AP9778
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BE22000 Ceiling Mount Wi-Fi 7 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.973  
CC MO 15E 5745.0  -  5825.0 0.959  
CC MO ND 15E 5260.0  -  5320.0 0.234  
CC MO ND 15E 5250.0  -  5250.0 0.0853  
CC MO ND 15E 5500.0  -  5720.0 0.25  

Power Output listed is conducted. Device is an 802.11a/n/ac/ax/be device in a 2x2 MIMO configuration as described in this filing. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 240 MHz bandwidth modes at 5 GHz WLAN. It also contains BLE, 2.4GHz/6GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ys7j/xE54Q5hj8Ra1htkqg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 10/03/2023

Application Dated: 09/10/2023
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AP9778
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BE22000 Ceiling Mount Wi-Fi 7 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.973  
CC MO 15E 5745.0  -  5825.0 0.959  
CC MO ND 15E 5260.0  -  5320.0 0.234  
CC MO ND 15E 5250.0  -  5250.0 0.0853  
CC MO ND 15E 5500.0  -  5720.0 0.25  

Power Output listed is conducted. Device is an 802.11a/n/ac/ax/be device in a 2x2 MIMO configuration as described in this filing. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 240 MHz bandwidth modes at 5 GHz WLAN. It also contains BLE, 2.4GHz/6GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application e9zqkd4N8TjBdl0SYBVsTQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 10/03/2023

Application Dated: 09/10/2023
TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre,
9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AP9778
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: BE22000 Ceiling Mount Wi-Fi 7 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 6115.0  -  7095.0 0.349  

Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20MHz, 40MHz, 80MHz, 160MHz and 320MHz bandwidth modes in 6GHz WLAN.

It also contains BLE, 2.4 GHz and 5 GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application e9zqkd4N8TjBdl0SYBVsTQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 10/03/2023

Application Dated: 09/10/2023
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AP9778
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: BE22000 Ceiling Mount Wi-Fi 7 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 6115.0  -  7095.0 0.349  

Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20MHz, 40MHz, 80MHz, 160MHz and 320MHz bandwidth modes in 6GHz WLAN.

It also contains BLE, 2.4 GHz and 5 GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: