FCC ID 2AXJ4AX55V4

AX3000 Gigabit Wi-Fi 6 Router

by TP-Link Corporation Limited

Grantee Code: 2AXJ4   Product Code: AX55V4
Latest application date: 2024-11-30

FCC ID Device Details

FCC ID2AXJ4AX55V4
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AXJ4
Product CodeAX55V4
Applicant BusinessTP-Link Corporation Limited
Related Domains tp-link.com newbtl.com
Equipment ClassAX3000 Gigabit Wi-Fi 6 Router
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2024-11-30
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2024-11-30
2412-2462 MHzOriginal Equipment2023-10-16
5745-5825 MHzOriginal Equipment2023-10-16

Exhibits

DocumentTypeAvailableFile
Archer AX55_User ManualUsers Manual2023-10-16PDF 3.6 MB
14. Internal Photos R01Internal Photos2024-11-30PDF 1.9 MB
2308TW0104-UI-Internal PhotographInternal Photos2023-10-16PDF 1.6 MB
13. External PhotosExternal Photos2024-11-30PDF 1.1 MB
2308TW0104-UE-External PhotographExternal Photos2023-10-16PDF 1,013.8 KB
Archer AX55-Label and Label LocationID Label/Location Info2023-10-16PDF 215.4 KB
6.Test setup photosTest Setup Photos2024-11-30PDF 218.5 KB
2308TW0104-UT-Test Setup PhotographTest Setup Photos2023-10-16PDF 595.6 KB
5.Test Report_BTL-FCCP-1-2408G144_WLAN 2.4G R00Test Report2024-11-30PDF 978.7 KB
5.Test Report_BTL-FCCP-2-2408G144_WLAN 5G Band 1-4 R00Test Report2024-11-30PDF 1 MB
5.Test Report_BTL-FCCP-3-2408G144_MPE R00RF Exposure Info2024-11-30PDF 279.2 KB
2308TW0104-U2-FCC Part 15.247-Wi-Fi 2.4G_Part1Test Report2023-10-16PDF 4.7 MB
2308TW0104-U2-FCC Part 15.247-Wi-Fi 2.4G_Part2Test Report2023-10-16PDF 4.8 MB
2308TW0104-U2-FCC Part 15.247-Wi-Fi 2.4G_Part3Test Report2023-10-16PDF 2.8 MB
2308TW0104-U3-FCC Part 15.407-Wi-Fi 5G_Part1Test Report2023-10-16PDF 5.2 MB
2308TW0104-U3-FCC Part 15.407-Wi-Fi 5G_Part2Test Report2023-10-16PDF 5.4 MB
2308TW0104-U3-FCC Part 15.407-Wi-Fi 5G_Part3Test Report2023-10-16PDF 5.5 MB
2308TW0104-U3-FCC Part 15.407-Wi-Fi 5G_Part4Test Report2023-10-16PDF 4.7 MB
2308TW0104-U4-FCC Part 15.407-Wi-Fi 5G-DFS_Part1Test Report2023-10-16PDF 5.2 MB
2308TW0104-U4-FCC Part 15.407-Wi-Fi 5G-DFS_Part2Test Report2023-10-16PDF 5.1 MB
2308TW0104-U4-FCC Part 15.407-Wi-Fi 5G-DFS_Part3Test Report2023-10-16PDF 4.3 MB
Archer AX55-AUT Report_Rev01Test Report2023-10-16PDF 960.7 KB
15 .US Agent Letter for Service of ProcessAttestation Statements2024-11-30PDF 26.9 KB
9. FCC Attestation Letter COVERED EQUIPMENTAttestation Statements2024-11-30PDF 157.6 KB
ACB-FORM-FCC-Application-Letters-Covered-List-Attestation_RevAttestation Statements2023-10-16PDF 442.1 KB
ACB-FORM-FCC-Application-Letters-U.S.-Agent-Letter-for-Service-of-Process-RevAttestation Statements2023-10-16PDF 26.9 KB
Archer AX55-FCC Attestation LetterCover Letter(s)2023-10-16PDF 524.5 KB
Archer AX55-FCC Attestation LetterAttestation Statements2023-10-16PDF 524.5 KB
1.Class II permissive change format letter-FCCCover Letter(s)2024-11-30PDF 166.5 KB
10. FCC Non-SDR Cover LetterCover Letter(s)2024-11-30PDF 347.2 KB
11. FCC Wi-Fi Channel 12 and 13 Declaration LetterCover Letter(s)2024-11-30PDF 56.9 KB
3.Authorization letterCover Letter(s)2024-11-30PDF 89.3 KB
4.Confidentiality request letterCover Letter(s)2024-11-30PDF 217.2 KB
7.Declaration of ConformityCover Letter(s)2024-11-30PDF 425.9 KB
Archer AX55-Declaration of Frequency StabilityCover Letter(s)2023-10-16PDF 140 KB
Archer AX55-FCC Confidentiality Request LetterCover Letter(s)2023-10-16PDF 526.5 KB
Archer AX55-FCC Declaration of AuthorizationCover Letter(s)2023-10-16PDF 537 KB
Archer AX55-FCC Declaration of ConformityCover Letter(s)2023-10-16PDF 532.7 KB
Archer AX55-Non-SDR letterCover Letter(s)2023-10-16PDF 657.1 KB
2308TW0104-U5-FCC RF Exposure ReportRF Exposure Info2023-10-16PDF 431.4 KB
17. Block Diagram Metadata onlyBlock DiagramPDF 848.8 KB
Confidential_Archer AX55-Block Diagram Metadata onlyBlock DiagramPDF 334 KB
19. Schematics Metadata onlySchematicsPDF 1.5 MB
Confidential_Archer AX55-Schematics Metadata onlySchematicsPDF 1.3 MB
16. Operation Description Metadata onlyOperational DescriptionPDF 266.7 KB
Archer AX55-Software Security Requirements Cover Letter Metadata onlyOperational DescriptionPDF 414.6 KB
Confidential_Archer AX55-Operation Description_Rev01 Metadata onlyOperational DescriptionPDF 60.7 KB
8. SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Metadata onlySDR Software/Security Info.PDF 459.9 KB
18. Bom Metadata onlyParts List/Tune Up InfoPDF 236.3 KB

Application Information

Application IDoURjxg7W31Gqd78EfA9VGw==
Final Action Date2024-11-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0034122556
ModelAX55V4
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAX3000 Gigabit Wi-Fi 6 Router
Responsible PartySarah Wang, certification@tp-link.com , 00852-37585503
AgentRose Rose Rose, BTL Inc., Rose.liu@newbtl.com , 076983183000
Technical ContactSteven Lu, BTL Inc., steven@newbtl.com , 076983183000
Non-Technical ContactRose Lu, BTL Inc., Rose.liu@newbtl.com , 076983183000
Test FirmSophia Huang, BTL Inc., sophia.huang@newbtl.com , 86-769-83183000
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to change the network port signal transformer PCB from integrated plug-in transformer material to separated chip transformer material. Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.

Applications

Application IDDatePurpose
oURjxg7W31Gqd78EfA9VGw==2024-11-30Class II permissive change or modification of presently authorized equipment
oELqRUFkL4vZ/IPRuS3Tfw==2024-11-30Class II permissive change or modification of presently authorized equipment
XM6ACnwzNfq4aDnYO1Lp8g==2023-10-16Original Equipment
ILVAZX6vxOtWZyMk6ENM9g==2023-10-16Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.881000015CCC, MO
5180-5240 MHz0.690215ECC, MO
5250 MHz0.231215ECC, MO, ND
5260-5320 MHz0.24615ECC, MO, ND
5500-5720 MHz0.242115ECC, MO, ND
5570 MHz0.235515ECC, MO, ND
5745-5825 MHz0.749915ECC, MO

Grants

TCB Grant - Application XM6ACnwzNfq4aDnYO1Lp8g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 10/16/2023

Application Dated: 10/08/2023
TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre,
9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AX55V4
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Digital Transmission System
Notes: AX3000 Gigabit Wi-Fi 6 Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.881  

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application XM6ACnwzNfq4aDnYO1Lp8g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 10/16/2023

Application Dated: 10/08/2023
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AX55V4
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Digital Transmission System
Notes: AX3000 Gigabit Wi-Fi 6 Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.881  

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application oURjxg7W31Gqd78EfA9VGw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 11/30/2024

Application Dated: 11/28/2024
TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre,
9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AX55V4
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Digital Transmission System
Notes: AX3000 Gigabit Wi-Fi 6 Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.881  

Class II Permissive Change to change the network port signal transformer PCB from integrated plug-in transformer material to separated chip transformer material.

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application oURjxg7W31Gqd78EfA9VGw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 11/30/2024

Application Dated: 11/28/2024
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AX55V4
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Digital Transmission System
Notes: AX3000 Gigabit Wi-Fi 6 Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.881  

Class II Permissive Change to change the network port signal transformer PCB from integrated plug-in transformer material to separated chip transformer material.

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application oELqRUFkL4vZ/IPRuS3Tfw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 11/30/2024

Application Dated: 11/28/2024
TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre,
9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AX55V4
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX3000 Gigabit Wi-Fi 6 Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.6902  
CC MO ND 15E 5260.0  -  5320.0 0.246  
CC MO ND 15E 5500.0  -  5720.0 0.2421  
CC MO 15E 5745.0  -  5825.0 0.7499  
CC MO ND 15E 5250.0  -  5250.0 0.2312  
CC MO ND 15E 5570.0  -  5570.0 0.2355  

Class II Permissive Change to change the network port signal transformer PCB from integrated plug-in transformer material to separated chip transformer material.

Output power listed is conducted. Device is a 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains a 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application oELqRUFkL4vZ/IPRuS3Tfw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 11/30/2024

Application Dated: 11/28/2024
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AX55V4
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX3000 Gigabit Wi-Fi 6 Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.6902  
CC MO ND 15E 5260.0  -  5320.0 0.246  
CC MO ND 15E 5500.0  -  5720.0 0.2421  
CC MO 15E 5745.0  -  5825.0 0.7499  
CC MO ND 15E 5250.0  -  5250.0 0.2312  
CC MO ND 15E 5570.0  -  5570.0 0.2355  

Class II Permissive Change to change the network port signal transformer PCB from integrated plug-in transformer material to separated chip transformer material.

Output power listed is conducted. Device is a 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains a 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ILVAZX6vxOtWZyMk6ENM9g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 10/16/2023

Application Dated: 10/08/2023
TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre,
9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AX55V4
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX3000 Gigabit Wi-Fi 6 Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.6902  
CC MO ND 15E 5260.0  -  5320.0 0.246  
CC MO ND 15E 5500.0  -  5720.0 0.2421  
CC MO 15E 5745.0  -  5825.0 0.7499  
CC MO ND 15E 5250.0  -  5250.0 0.2312  
CC MO ND 15E 5570.0  -  5570.0 0.2355  

Output power listed is conducted. Device is a 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains a 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ILVAZX6vxOtWZyMk6ENM9g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 10/16/2023

Application Dated: 10/08/2023
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4AX55V4
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX3000 Gigabit Wi-Fi 6 Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.6902  
CC MO ND 15E 5260.0  -  5320.0 0.246  
CC MO ND 15E 5500.0  -  5720.0 0.2421  
CC MO 15E 5745.0  -  5825.0 0.7499  
CC MO ND 15E 5250.0  -  5250.0 0.2312  
CC MO ND 15E 5570.0  -  5570.0 0.2355  

Output power listed is conducted. Device is a 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 44 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains a 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: