FCC ID 2AXJ4C420
Smart Wire-Free Security Camera
by TP-Link Corporation Limited
Grantee Code: 2AXJ4 Product Code: C420
Latest application date: 2023-10-28
FCC ID Device Details
| FCC ID | 2AXJ4C420 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AXJ4 |
| Product Code | C420 |
| Applicant Business | TP-Link Corporation Limited |
| Related Domains |  tp-link.com  newbtl.com |
| Equipment Class | Smart Wire-Free Security Camera |
| Test Firm | BTL Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2023-10-28 |
| 920.9-922.3 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-25 |
| 2412-2462 MHz | Original Equipment | 2022-10-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 14. Users Manual Rev1 part1 | Users Manual | 2022-10-01 | PDF 4.8 MB |
| 14. Users Manual Rev1 part2 | Users Manual | 2022-10-01 | PDF 5 MB |
| 14. Users Manual Rev1 part3 | Users Manual | 2022-10-01 | PDF 357.1 KB |
| 17. Internal photos | Internal Photos | 2023-10-28 | PDF 1.4 MB |
| 18. Internal Photos | Internal Photos | 2023-05-25 | PDF 1.3 MB |
| 18. Internal Photos | Internal Photos | 2022-10-01 | PDF 5.7 MB |
| 16. External photos | External Photos | 2023-10-28 | PDF 1.5 MB |
| 19. External Photos | External Photos | 2023-05-25 | PDF 1.5 MB |
| 19. External Photos | External Photos | 2022-10-01 | PDF 1.9 MB |
| 20. Label and location | ID Label/Location Info | 2022-10-01 | PDF 498.5 KB |
| 6.FCC Test setup photos | Test Setup Photos | 2023-10-28 | PDF 376.1 KB |
| 11. FCC Test Setup Photos | Test Setup Photos | 2023-05-25 | PDF 207.9 KB |
| 11. FCC Test Setup Photos | Test Setup Photos | 2022-10-01 | PDF 1.5 MB |
| 5.FCC Test Report BTL-FCCP-1-2307G106 R00_WLAN | Test Report | 2023-10-28 | PDF 1.9 MB |
| 5.FCC Test Report BTL-FCCP-3-2307G106 R00_Sub 1G | Test Report | 2023-10-28 | PDF 317.5 KB |
| 12. FCC Test Report BTL-FCCP-1-2302G024 R02_WLAN | Test Report | 2023-05-25 | PDF 1.9 MB |
| 12. FCC Test Report BTL-FCCP-1-2204C109A_WLAN 2.4G R02 part1 | Test Report | 2022-10-01 | PDF 4.8 MB |
| 12. FCC Test Report BTL-FCCP-1-2204C109A_WLAN 2.4G R02 part2 | Test Report | 2022-10-01 | PDF 2 MB |
| 12. FCC Test Report BTL-FCCP-2-2204C109A_Sub 1G R02 | Test Report | 2022-10-01 | PDF 3.2 MB |
| 12. FCC Test Report BTL-FCCP-3-2204C109A_MPE R02 | RF Exposure Info | 2022-10-01 | PDF 167.2 KB |
| 26. Antenna Specification Rev1 | Test Report | 2022-10-01 | PDF 307 KB |
| 14. Attestation Statements US agent for service of process | Attestation Statements | 2023-10-28 | PDF 26.9 KB |
| 15. FCC Attestation Letter COVERED EQUIPMENT | Attestation Statements | 2023-10-28 | PDF 118.4 KB |
| 2. FCC Agency Authorization Letter | Cover Letter(s) | 2023-10-28 | PDF 66.6 KB |
| 8. FCC Class II permissive change format letter Rev1 | Cover Letter(s) | 2023-10-28 | PDF 18.1 KB |
| 20. Class II permissive change format letter-FCC | Cover Letter(s) | 2023-05-25 | PDF 18.1 KB |
| 6. FCC Confidentiality Request Letter | Cover Letter(s) | 2023-05-25 | PDF 196.3 KB |
| 2. FCC Agency Authorization Letter | Cover Letter(s) | 2022-10-01 | PDF 92.7 KB |
| 24. FCC Wi-Fi Channel 12 and 13 Declaration Letter | Cover Letter(s) | 2022-10-01 | PDF 22.4 KB |
| 25. SDoC Letter | Cover Letter(s) | 2022-10-01 | PDF 118.5 KB |
| 6. FCC Confidentiality Request Letter | Cover Letter(s) | 2022-10-01 | PDF 223.5 KB |
| 13. FCC MPE BTL-FCCP-2-2307G106 R00_MPE | RF Exposure Info | 2023-10-28 | PDF 297.7 KB |
| 13. FCC MPE BTL-FCCP-2-2302G024 R02_MPE | RF Exposure Info | 2023-05-25 | PDF 311.3 KB |
| 16. Block Diagram Metadata only | Block Diagram | PDF 501.8 KB | |
| 16. Block Diagram Metadata only | Block Diagram | PDF 488 KB | |
| 15. Schematics Metadata only | Schematics | PDF 1 MB | |
| 17. Operation Description Metadata only | Operational Description | PDF 542.2 KB | |
| 17. Operation Description Rev1 Metadata only | Operational Description | PDF 665.2 KB |
Application Information
| Application ID | 4/QCjKNVQ8b7SurED6QHDg== |
|---|---|
| Final Action Date | 2023-10-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0029962685 |
| Model | C420 |
| Frequency Range | 2412-2472 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Smart Wire-Free Security Camera |
| Responsible Party | Sarah Wang, certification@tp-link.com , 00852-37585503 |
| Agent | Rose Rose Rose, BTL Inc., Rose.liu@newbtl.com , +8676983183000 |
| Technical Contact | Steven Lu, BTL Inc., steven@newbtl.com , +8676983183000 |
| Non-Technical Contact | Rose Liu, BTL Inc., Rose.liu@newbtl.com , +8676983183000 |
| Test Firm | Jackie Chiu, BTL Inc., jackie@newbtl.com , +886-2-2641-8198 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This is a C2PC application. Power Output listed is conducted. Power out of the device at the upper channels 12&13 are reduced for band edge radiated emission compliance reasons. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4/QCjKNVQ8b7SurED6QHDg== | 2023-10-28 | Class II permissive change or modification of presently authorized equipment |
| IktkAHvZKnyzrb8Kd5PnTw== | 2023-05-25 | Class II permissive change or modification of presently authorized equipment |
| ReogAkaTGXyqKBPrmH0skg== | 2022-10-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ReogAkaTGXyqKBPrmH0skg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 10/01/2022 Application Dated: 09/30/2022 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4C420 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Wire-Free Security Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0723 | |||
| 15C | 920.9 - 922.3 | 0.0445 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
EAS Grant - Application ReogAkaTGXyqKBPrmH0skg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 10/01/2022 Application Dated: 09/30/2022 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4C420 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Wire-Free Security Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0723 | |||
| 15C | 920.9 - 922.3 | 0.0445 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 05/25/2023 Application Dated: 05/23/2023 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4C420 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Wire-Free Security Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2472.0 | 0.0723 | |||
| 15C | 920.9 - 922.3 | 0.0445 |
| This is a C2PC application. Power Output listed is conducted. Power out of the device at the upper channels 12&13 are reduced for band edge radiated emission compliance reasons. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
EAS Grant - Application IktkAHvZKnyzrb8Kd5PnTw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 05/25/2023 Application Dated: 05/23/2023 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4C420 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Wire-Free Security Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2472.0 | 0.0723 | |||
| 15C | 920.9 - 922.3 | 0.0445 |
| This is a C2PC application. Power Output listed is conducted. Power out of the device at the upper channels 12&13 are reduced for band edge radiated emission compliance reasons. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 10/28/2023 Application Dated: 10/27/2023 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4C420 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Wire-Free Security Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2472.0 | 0.0723 | |||
| 15C | 920.9 - 922.3 | 0.0445 |
| This is a C2PC application. Power Output listed is conducted. Power out of the device at the upper channels 12&13 are reduced for band edge radiated emission compliance reasons. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
EAS Grant - Application 4/QCjKNVQ8b7SurED6QHDg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 10/28/2023 Application Dated: 10/27/2023 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4C420 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Wire-Free Security Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2472.0 | 0.0723 | |||
| 15C | 920.9 - 922.3 | 0.0445 |
| This is a C2PC application. Power Output listed is conducted. Power out of the device at the upper channels 12&13 are reduced for band edge radiated emission compliance reasons. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
| Mail To: |