FCC ID 2AXJ4EAP655WALL

AX3000 Wall Plate Wi-Fi 6 Access Point

by TP-Link Corporation Limited

Grantee Code: 2AXJ4   Product Code: EAP655WALL
Latest application date: 2022-10-27

FCC ID Device Details

FCC ID2AXJ4EAP655WALL
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AXJ4
Product CodeEAP655WALL
Applicant BusinessTP-Link Corporation Limited
Related Domains tp-link.com mrt-cert.com
Equipment ClassAX3000 Wall Plate Wi-Fi 6 Access Point
Test FirmMRT Technology (Taiwan) Co.,Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2022-10-27
5745-5825 MHzOriginal Equipment2022-10-27

Exhibits

DocumentTypeAvailableFile
Overview of Regulatory ComplianceUsers Manual2022-10-27PDF 399.1 KB
User GuideUsers Manual2022-10-27PDF 2.3 MB
2208TW0106_Internal PhotographInternal Photos2022-10-27PDF 1.7 MB
2208TW0106_External PhotographExternal Photos2022-10-27PDF 446.7 KB
Label and Label Location_Rev01ID Label/Location Info2022-10-27PDF 1.4 MB
2208TW0106_Test PhotographTest Setup Photos2022-10-27PDF 549.9 KB
2208TW0106-U1-FCC Part 15.247-WiFi 2.4G_Part1Test Report2022-10-27PDF 5.3 MB
2208TW0106-U1-FCC Part 15.247-WiFi 2.4G_Part2Test Report2022-10-27PDF 5.4 MB
2208TW0106-U1-FCC Part 15.247-WiFi 2.4G_Part3Test Report2022-10-27PDF 3.4 MB
2208TW0106-U2-FCC Part 15.407-WiFi 5G_Part1Test Report2022-10-27PDF 5.2 MB
2208TW0106-U2-FCC Part 15.407-WiFi 5G_Part2Test Report2022-10-27PDF 5.1 MB
2208TW0106-U2-FCC Part 15.407-WiFi 5G_Part3Test Report2022-10-27PDF 5.5 MB
2208TW0106-U2-FCC Part 15.407-WiFi 5G_Part4Test Report2022-10-27PDF 3.6 MB
2208TW0106-U3-FCC Part 15.407-WiFi 5G-DFS_Part1Test Report2022-10-27PDF 5.5 MB
2208TW0106-U3-FCC Part 15.407-WiFi 5G-DFS_Part2Test Report2022-10-27PDF 5.5 MB
2208TW0106-U3-FCC Part 15.407-WiFi 5G-DFS_Part3Test Report2022-10-27PDF 2.1 MB
Antenna SpecificationTest Report2022-10-27PDF 1.1 MB
EAP655-FCC Attestation LetterCover Letter(s)2022-10-27PDF 210 KB
EAP655-Declaration of Frequency StabilityCover Letter(s)2022-10-27PDF 178.1 KB
EAP655-FCC Confidentiality Request LetterCover Letter(s)2022-10-27PDF 260.8 KB
EAP655-FCC Declaration of AuthorizationCover Letter(s)2022-10-27PDF 241.2 KB
EAP655-FCC Declaration of ConformityCover Letter(s)2022-10-27PDF 227.7 KB
EAP655-Non-SDR letterCover Letter(s)2022-10-27PDF 246.4 KB
2208TW0106-U4-FCC RF Exposure ReportRF Exposure Info2022-10-27PDF 378.8 KB
Confidential_Block Diagram Metadata onlyBlock DiagramPDF 193.6 KB
Confidential_Schematics Metadata onlySchematicsPDF 1.5 MB
Confidential_EAP655-Wall_Operation Description Metadata onlyOperational DescriptionPDF 49.2 KB
EAP655-Software Security Requirements Cover Letter_Rev01 Metadata onlySDR Software/Security InfPDF 221.5 KB

Application Information

Application IDufX01mUMZ/27+TMs94bS2w==
Final Action Date2022-10-27
Application PurposeOriginal Equipment
Applicant FRN0029962685
ModelEAP655WALL
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAX3000 Wall Plate Wi-Fi 6 Access Point
Responsible PartySarah Wang, certification@tp-link.com , 00852-37585503
AgentMarlin Marlin Marlin, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , +8651266308358
Technical ContactRobin Wu, MRT Technology (Suzhou) Co., Ltd, Robinwu@mrt-cert.com , +8651266308358
Non-Technical ContactRobin Wu, MRT Technology (Suzhou) Co., Ltd, Robinwu@mrt-cert.com , +8651266308358
Test FirmChenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power listed is conducted. Device is an 802.11 b/g/n/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has HT/HE 20 MHz and HT/HE 40 MHz bandwidth modes in 2.4GHz WLAN transmitter. It contains 5GHz WLAN transmitter.

Applications

Application IDDatePurpose
ufX01mUMZ/27+TMs94bS2w==2022-10-27Original Equipment
u4gi3pg6a1HUwz8ArEgYrg==2022-10-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.180300015CCC, MO
5180-5240 MHz0.203715ECC, MO
5250 MHz0.015115ECC, MO, ND
5260-5320 MHz0.185815ECC, MO, ND
5500-5720 MHz0.185815ECC, MO, ND
5570 MHz0.018115ECC, MO, ND
5745-5825 MHz0.249515ECC, MO

Grants

TCB Grant - Application ufX01mUMZ/27+TMs94bS2w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 10/27/2022

Application Dated: 10/26/2022
TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre,
9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4EAP655WALL
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Digital Transmission System
Notes: AX3000 Wall Plate Wi-Fi 6 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1803  

Output power listed is conducted. Device is an 802.11 b/g/n/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/HE 20 MHz and HT/HE 40 MHz bandwidth modes in 2.4GHz WLAN transmitter. It contains 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ufX01mUMZ/27+TMs94bS2w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 10/27/2022

Application Dated: 10/26/2022
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4EAP655WALL
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Digital Transmission System
Notes: AX3000 Wall Plate Wi-Fi 6 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1803  

Output power listed is conducted. Device is an 802.11 b/g/n/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/HE 20 MHz and HT/HE 40 MHz bandwidth modes in 2.4GHz WLAN transmitter. It contains 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application u4gi3pg6a1HUwz8ArEgYrg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 10/27/2022

Application Dated: 10/26/2022
TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre,
9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4EAP655WALL
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX3000 Wall Plate Wi-Fi 6 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2037  
CC MO ND 15E 5260.0  -  5320.0 0.1858  
CC MO ND 15E 5500.0  -  5720.0 0.1858  
CC MO 15E 5745.0  -  5825.0 0.2495  
CC MO ND 15E 5250.0  -  5250.0 0.0151  
CC MO ND 15E 5570.0  -  5570.0 0.0181  

Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz, VHT/HE 80 MHz and VHT/HE 160 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application u4gi3pg6a1HUwz8ArEgYrg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Corporation Limited
Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 10/27/2022

Application Dated: 10/26/2022
 
Attention: Sarah Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXJ4EAP655WALL
Name of Grantee:  TP-Link Corporation Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX3000 Wall Plate Wi-Fi 6 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2037  
CC MO ND 15E 5260.0  -  5320.0 0.1858  
CC MO ND 15E 5500.0  -  5720.0 0.1858  
CC MO 15E 5745.0  -  5825.0 0.2495  
CC MO ND 15E 5250.0  -  5250.0 0.0151  
CC MO ND 15E 5570.0  -  5570.0 0.0181  

Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz, VHT/HE 80 MHz and VHT/HE 160 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: