FCC ID 2AXJ4EAP683LR
AX6000 Ceiling Mount Wi-Fi 6 Access Point
by TP-Link Corporation Limited
Grantee Code: 2AXJ4 Product Code: EAP683LR
Latest application date: 2023-09-22
FCC ID Device Details
| FCC ID | 2AXJ4EAP683LR |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AXJ4 |
| Product Code | EAP683LR |
| Applicant Business | TP-Link Corporation Limited |
| Related Domains | |
| Equipment Class | AX6000 Ceiling Mount Wi-Fi 6 Access Point |
| Test Firm | MRT Technology (Taiwan) Co.,Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2023-09-22 |
| 2402-2480 MHz | Original Equipment | 2023-09-22 |
Exhibits
Application Information
| Application ID | kaQUH0zguZMl2QzSRerbgg== |
|---|---|
| Final Action Date | 2023-09-22 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029962685 |
| Model | EAP683LR |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | AX6000 Ceiling Mount Wi-Fi 6 Access Point |
| Responsible Party | Sarah Wang, certification@tp-link.com |
| Agent | Marlin Marlin Marlin, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com |
| Technical Contact | Robin Wu, MRT Technology (Suzhou) Co., Ltd, Robinwu@mrt-cert.com |
| Non-Technical Contact | Robin Wu, MRT Technology (Suzhou) Co., Ltd, Robinwu@mrt-cert.com |
| Test Firm | Chenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com |
| TCB Email | hotline@acbcert.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 49cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz, VHT/HE 80 MHz and VHT/HE 160 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN and BLE transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| kaQUH0zguZMl2QzSRerbgg== | 2023-09-22 | Original Equipment |
| Q1wFPRb6IIetqd9qXNU2mw== | 2023-09-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Q1wFPRb6IIetqd9qXNU2mw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/22/2023 Application Dated: 09/19/2023 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP683LR |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | AX6000 Ceiling Mount Wi-Fi 6 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0689 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.4656 |
| Output power listed is conducted. Device is an 802.11 b/g/n/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 49cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has HT/HE 20 MHz and HT/HE 40 MHz bandwidth modes in 2.4GHz WLAN transmitter. It contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Q1wFPRb6IIetqd9qXNU2mw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 09/22/2023 Application Dated: 09/19/2023 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP683LR |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | AX6000 Ceiling Mount Wi-Fi 6 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0689 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.4656 |
| Output power listed is conducted. Device is an 802.11 b/g/n/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 49cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has HT/HE 20 MHz and HT/HE 40 MHz bandwidth modes in 2.4GHz WLAN transmitter. It contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/22/2023 Application Dated: 09/19/2023 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP683LR |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AX6000 Ceiling Mount Wi-Fi 6 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.5188 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.233 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2495 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.6012 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.2382 |
| Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 49cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz, VHT/HE 80 MHz and VHT/HE 160 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN and BLE transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application kaQUH0zguZMl2QzSRerbgg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 09/22/2023 Application Dated: 09/19/2023 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP683LR |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AX6000 Ceiling Mount Wi-Fi 6 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.5188 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.233 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2495 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.6012 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.2382 |
| Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 49cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz, VHT/HE 80 MHz and VHT/HE 160 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN and BLE transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |