FCC ID 2AXJ4EAP783
BE22000 Ceiling Mount Wi-Fi 7 Access Point
by TP-Link Corporation Limited
Grantee Code: 2AXJ4 Product Code: EAP783
Latest application date: 2023-11-14
FCC ID Device Details
| FCC ID | 2AXJ4EAP783 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AXJ4 |
| Product Code | EAP783 |
| Applicant Business | TP-Link Corporation Limited |
| Related Domains |  tp-link.com |
| Equipment Class | BE22000 Ceiling Mount Wi-Fi 7 Access Point |
| Test Firm | UL Verification Services (Guangzhou) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2023-11-14 |
| 6115-7095 MHz | Original Equipment | 2023-11-14 |
| 5745-5825 MHz | Original Equipment | 2023-11-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual 1 R3 | Users Manual | 2023-11-14 | PDF 826.3 KB |
| EUTPhoto_Internal R1 | Internal Photos | 2023-11-14 | PDF 1,015.5 KB |
| EUTPhoto_External | External Photos | 2023-11-14 | PDF 595.2 KB |
| label and label location R1 | ID Label/Location Info | 2023-11-14 | PDF 959.5 KB |
| Setup Photo | Test Setup Photos | 2023-11-14 | PDF 652.4 KB |
| 4790941545-1-RF-1-BLE FCC ISED R1 | Test Report | 2023-11-14 | PDF 4.9 MB |
| 4790941545-1-RF-2-WIFI 2.4G FCC ISED R1_Part1 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-2-WIFI 2.4G FCC ISED R1_Part2 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-2-WIFI 2.4G FCC ISED R1_Part3 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-2-WIFI 2.4G FCC ISED R1_Part4 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-2-WIFI 2.4G FCC ISED R1_Part5 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-2-WIFI 2.4G FCC ISED R1_Part6 | Test Report | 2023-11-14 | PDF 2.9 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part1 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part10 | Test Report | 2023-11-14 | PDF 5.3 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part11 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part12 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part13 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part14 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part15 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part16 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part17 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part18 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part19 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part2 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part3 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part4 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part5 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part6 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part7 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part8 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-3-WIFI 5G FCC ISED R1_Part9 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part1 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part10 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part11 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part12 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part13 | Test Report | 2023-11-14 | PDF 5.3 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part14 | Test Report | 2023-11-14 | PDF 2 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part2 | Test Report | 2023-11-14 | PDF 5.2 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part3 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part4 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part5 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part6 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part7 | Test Report | 2023-11-14 | PDF 5.3 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part8 | Test Report | 2023-11-14 | PDF 5.5 MB |
| 4790941545-1-RF-4-WIFI 6G FCC ISED R1_Part9 | Test Report | 2023-11-14 | PDF 5.4 MB |
| 4790941545-1-RF-5_ DFS Report R1 | Test Report | 2023-11-14 | PDF 4.9 MB |
| tp-link AUT Report-EAP783-231031 R1 | Test Report | 2023-11-14 | PDF 1.1 MB |
| tp-link AUT Report-EAP783-BLE-231031 R1 | Test Report | 2023-11-14 | PDF 442.8 KB |
| ACB-FORM-FCC-Application-Letters-Covered-List-Attestation | Attestation Statements | 2023-11-14 | PDF 296.1 KB |
| ACB-FORM-FCC-Application-Letters-U.S.-Agent-Letter-for-Service-of-Process-4.13 | Attestation Statements | 2023-11-14 | PDF 26.9 KB |
| FCC Attestation Letter | Attestation Statements | 2023-11-14 | PDF 423.6 KB |
| Letter of Declaration on Indoor Access Point 6ID Operation.doc R1 | Attestation Statements | 2023-11-14 | PDF 214.5 KB |
| ACB-FORM-FCC-Application-Letters-Agency-Letter | Cover Letter(s) | 2023-11-14 | PDF 138.6 KB |
| ACB-FORM-FCC-Application-Letters-Confidentiality-Letter | Cover Letter(s) | 2023-11-14 | PDF 393.9 KB |
| Declaration of Frequency Stability | Cover Letter(s) | 2023-11-14 | PDF 483.1 KB |
| FCC Declaration of Conformity | Cover Letter(s) | 2023-11-14 | PDF 423.5 KB |
| Non-SDR letter | Cover Letter(s) | 2023-11-14 | PDF 523.3 KB |
| 4790941545-1-RF-6_FCC MPE Report | RF Exposure Info | 2023-11-14 | PDF 231.9 KB |
| Confidential_block diagram R1 Metadata only | Block Diagram | PDF 734.5 KB | |
| schematics R1 Metadata only | Schematics | PDF 3.2 MB | |
| Confidential_EAP783_Operation Description R3.doc Metadata only | Operational Description | PDF 176 KB | |
| Letter of Declaration on Indoor Access Point 6ID Operation.doc R1 Metadata only | SDR Software/Security Inf | PDF 214.5 KB | |
| Non-SDR letter Metadata only | SDR Software/Security Inf | PDF 523.3 KB | |
| Software Security Requirements Cover Letter R1 Metadata only | SDR Software/Security Inf | PDF 275.9 KB |
Application Information
| Application ID | sV7id2KsmnvPS+604lvvVw== |
|---|---|
| Final Action Date | 2023-11-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029962685 |
| Model | EAP783 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | BE22000 Ceiling Mount Wi-Fi 7 Access Point |
| Responsible Party | Sarah Wang, certification@tp-link.com , 00852-37585503 |
| Technical Contact | vicky Gao, UL Verification Services (Guangzhou) Co., Ltd, Son, vicky.gao@ul.com  , +86 0769-33817138 |
| Test Firm | Stephen Guo, UL Verification Services (Guangzhou) Co., Ltd., Stephen.guo@ul.com , +86 0769 33817120 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Output power listed is conducted. Device is an 802.11 b/g/n/ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz and 6GHz WLAN transmitters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| sV7id2KsmnvPS+604lvvVw== | 2023-11-14 | Original Equipment |
| mrRv6u/3WBQOrp49skuxQw== | 2023-11-14 | Original Equipment |
| lna9WymIXWfbwEFXjvmsWg== | 2023-11-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application sV7id2KsmnvPS+604lvvVw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/14/2023 Application Dated: 11/02/2023 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP783 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | BE22000 Ceiling Mount Wi-Fi 7 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0344 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.971 |
| Output power listed is conducted. Device is an 802.11 b/g/n/ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz and 6GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application sV7id2KsmnvPS+604lvvVw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 11/14/2023 Application Dated: 11/02/2023 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP783 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | BE22000 Ceiling Mount Wi-Fi 7 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0344 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.971 |
| Output power listed is conducted. Device is an 802.11 b/g/n/ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz and 6GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/14/2023 Application Dated: 11/02/2023 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP783 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | BE22000 Ceiling Mount Wi-Fi 7 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 6115.0 - 7095.0 | 0.6637 |
| Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes in 6GHz WLAN transmitter and it also contains BLE, 2.4 GHz and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application mrRv6u/3WBQOrp49skuxQw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 11/14/2023 Application Dated: 11/02/2023 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP783 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | BE22000 Ceiling Mount Wi-Fi 7 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 6115.0 - 7095.0 | 0.6637 |
| Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes in 6GHz WLAN transmitter and it also contains BLE, 2.4 GHz and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/14/2023 Application Dated: 11/02/2023 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP783 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BE22000 Ceiling Mount Wi-Fi 7 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.83 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.959 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.238 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.179 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.241 |
| Power Output listed is conducted. Device is an 802.11 a/n/ac/ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, 160MHz and 240 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BLE, 2.4GHz and 6GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application lna9WymIXWfbwEFXjvmsWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 11/14/2023 Application Dated: 11/02/2023 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4EAP783 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BE22000 Ceiling Mount Wi-Fi 7 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.83 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.959 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.238 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.179 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.241 |
| Power Output listed is conducted. Device is an 802.11 a/n/ac/ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, 160MHz and 240 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BLE, 2.4GHz and 6GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |