FCC ID 2AXJ4H100
Tapo Smart IoT HUB
by TP-Link Corporation Limited
Grantee Code: 2AXJ4 Product Code: H100
Latest application date: 2023-08-12
FCC ID Device Details
| FCC ID | 2AXJ4H100 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AXJ4 |
| Product Code | H100 |
| Applicant Business | TP-Link Corporation Limited |
| Related Domains |  tp-link.com  mrt-cert.com |
| Equipment Class | Tapo Smart IoT HUB |
| Test Firm | MRT Technology (Taiwan) Co.,Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2023-08-12 |
| 920.9-922.3 MHz | Class II permissive change or modification of presently authorized equipment | 2022-11-30 |
| 922.3 MHz | Original Equipment | 2021-08-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 6. Users Manual | Users Manual | 2022-11-30 | PDF 1 MB |
| 5. Users Manual | Users Manual | 2021-08-17 | PDF 907 KB |
| 2307TW0105-UI-Internal Photograph | Internal Photos | 2023-08-12 | PDF 747.4 KB |
| 7. Internal Photos | Internal Photos | 2022-11-30 | PDF 3.9 MB |
| 10. Internal Photos | Internal Photos | 2021-08-17 | PDF 4.4 MB |
| 2307TW0105-UE-External Photograph | External Photos | 2023-08-12 | PDF 370.5 KB |
| 8. External Photos | External Photos | 2022-11-30 | PDF 1,001.4 KB |
| 9. External Photos | External Photos | 2021-08-17 | PDF 829.6 KB |
| 4. Label and location | ID Label/Location Info | 2021-08-17 | PDF 2.1 MB |
| 2307TW0105-UT-Test Setup Photograph | Test Setup Photos | 2023-08-12 | PDF 542.2 KB |
| 11. Test Setup Photos | Test Setup Photos | 2021-08-17 | PDF 1.3 MB |
| 2307TW0105-U1-FCC_C2PC Part 15.247-Wi-Fi 2.4G | Test Report | 2023-08-12 | PDF 3 MB |
| 5. MPE Test Report rev1 | RF Exposure Info | 2022-11-30 | PDF 146.8 KB |
| 5. Test Report rev1 | Test Report | 2022-11-30 | PDF 3.6 MB |
| 5.Test Report rev2 | Test Report | 2022-11-30 | PDF 3.6 MB |
| 9. Antenna Specification rev2 | Test Report | 2022-11-30 | PDF 329.9 KB |
| 12. Test Report_922.3MHz R00 | Test Report | 2021-08-17 | PDF 2.3 MB |
| 12. Test Report_WLAN 2.4G R00_part1 | Test Report | 2021-08-17 | PDF 5.4 MB |
| 12. Test Report_WLAN 2.4G R00_part2 | Test Report | 2021-08-17 | PDF 1.1 MB |
| ACB-FORM-FCC-Application-Letters-Covered-List-Attestation | Attestation Statements | 2023-08-12 | PDF 441.9 KB |
| ACB-FORM-FCC-Application-Letters-U.S.-Agent-Letter-for-Service-of-Process | Attestation Statements | 2023-08-12 | PDF 26.2 KB |
| Tapo H100-FCC C2PC Declaration Letter | Cover Letter(s) | 2023-08-12 | PDF 427.9 KB |
| Tapo H100-FCC Confidentiality Request Letter | Cover Letter(s) | 2023-08-12 | PDF 510.5 KB |
| Tapo H100-FCC Declaration of Authorization | Cover Letter(s) | 2023-08-12 | PDF 506.1 KB |
| Tapo H100-FCC Declaration of Conformity | Cover Letter(s) | 2023-08-12 | PDF 500 KB |
| 11. Class II permissive change format letter | Cover Letter(s) | 2022-11-30 | PDF 15.7 KB |
| 12. Declaration of Conformity | Cover Letter(s) | 2022-11-30 | PDF 453.6 KB |
| 3.Authorization letter | Cover Letter(s) | 2022-11-30 | PDF 76 KB |
| 4.Confidentiality request letter | Cover Letter(s) | 2022-11-30 | PDF 205.7 KB |
| 14. Wi-Fi Channel 12 and 13 Declaration Letter | Cover Letter(s) | 2021-08-17 | PDF 14.7 KB |
| 2. Agency Authorization Letter | Cover Letter(s) | 2021-08-17 | PDF 42.4 KB |
| 3. Confidentiality Request Letter | Cover Letter(s) | 2021-08-17 | PDF 129.8 KB |
| 2307TW0105-U2-FCC RF Exposure Report | RF Exposure Info | 2023-08-12 | PDF 359.7 KB |
| 13. MPE | RF Exposure Info | 2021-08-17 | PDF 158.5 KB |
| 6. Block Diagram Metadata only | Block Diagram | PDF 249.4 KB | |
| Tapo H100-Block Digram_Rev01 Metadata only | Block Diagram | PDF 155.5 KB | |
| 7. Schematics rev2 Metadata only | Schematics | PDF 437.1 KB | |
| Confidential_Tapo H100-Schematic_Rev01 Metadata only | Schematics | PDF 552.5 KB | |
| 1. Operational Description Metadata only | Operational Description | PDF 488.5 KB | |
| 8. Operation Description Metadata only | Operational Description | PDF 69 KB | |
| Confidential_Tapo H100-Operational Description Metadata only | Operational Description | PDF 509.7 KB |
Application Information
| Application ID | DFVhw2vVsYowBuG+TgsfOQ== |
|---|---|
| Final Action Date | 2023-08-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0029962685 |
| Model | H100 |
| Frequency Range | 2412-2472 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Tapo Smart IoT HUB |
| Responsible Party | Sarah Wang, certification@tp-link.com , 00852-37585503 |
| Agent | Marlin Marlin Marlin, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358 |
| Technical Contact | Marlin Chen, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358 |
| Non-Technical Contact | Marlin Chen, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358 |
| Test Firm | Chenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This is a C2PC application. Power Output listed is conducted. Power out of the device at the upper channels 12&13 are reduced for band edge radiated emission compliance reasons. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| DFVhw2vVsYowBuG+TgsfOQ== | 2023-08-12 | Class II permissive change or modification of presently authorized equipment |
| HZQGiz/ojMbSZJ3A3jxx1A== | 2022-11-30 | Class II permissive change or modification of presently authorized equipment |
| qmvjDi8/5pOWvnKLFZ3N+A== | 2021-08-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application qmvjDi8/5pOWvnKLFZ3N+A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 08/17/2021 Application Dated: 08/17/2021 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4H100 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Tapo Smart IoT HUB |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0689 | |||
| 15C | 922.3 - 922.3 | 0.035 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
EAS Grant - Application qmvjDi8/5pOWvnKLFZ3N+A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 08/17/2021 Application Dated: 08/17/2021 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4H100 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Tapo Smart IoT HUB |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0689 | |||
| 15C | 922.3 - 922.3 | 0.035 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/30/2022 Application Dated: 11/29/2022 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4H100 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Tapo Smart IoT HUB |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 920.9 - 922.3 | 0.035 | |||
| 15C | 2412.0 - 2462.0 | 0.0689 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. This is a C2PC application to add the nominal operating frequency (920.9MHz, 921.7MHz) by software. |
EAS Grant - Application HZQGiz/ojMbSZJ3A3jxx1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 11/30/2022 Application Dated: 11/29/2022 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4H100 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Tapo Smart IoT HUB |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 920.9 - 922.3 | 0.035 | |||
| 15C | 2412.0 - 2462.0 | 0.0689 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. This is a C2PC application to add the nominal operating frequency (920.9MHz, 921.7MHz) by software. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 08/12/2023 Application Dated: 08/10/2023 |
| TP-Link Corporation Limited |
| Room 901, 9/F. , New East Ocean Centre, |
| 9 Science Museum Road, Tsim Sha Tsui, Kowloon |
| Hong Kong, Hong Kong |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4H100 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Tapo Smart IoT HUB |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2472.0 | 0.0689 | |||
| 15C | 920.9 - 922.3 | 0.035 |
| This is a C2PC application. Power Output listed is conducted. Power out of the device at the upper channels 12&13 are reduced for band edge radiated emission compliance reasons. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
EAS Grant - Application DFVhw2vVsYowBuG+TgsfOQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon Hong Kong, Hong Kong |
Date of Grant: 08/12/2023 Application Dated: 08/10/2023 |
| Attention: Sarah Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXJ4H100 |
| Name of Grantee: | TP-Link Corporation Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Tapo Smart IoT HUB |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2472.0 | 0.0689 | |||
| 15C | 920.9 - 922.3 | 0.035 |
| This is a C2PC application. Power Output listed is conducted. Power out of the device at the upper channels 12&13 are reduced for band edge radiated emission compliance reasons. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
| Mail To: |