1. FCC ID
  2. 2AXMR
  3. 2AXMRCORV-UV-1

FCC ID 2AXMRCORV-UV-1

Corvus UV

by Corvus Robotics, Inc.

Grantee Code: 2AXMR   Product Code: CORVUV1
Latest application date: 2020-10-21

FCC ID Device Details

FCC ID2AXMRCORV-UV-1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AXMR
Product CodeCORVUV1
Applicant BusinessCorvus Robotics, Inc. 🇺🇸
Related Domains corvus-robotics.com
Equipment ClassCorvus UV
Test FirmShenzhen CTB Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-10-21
5745-5825 MHzOriginal Equipment2020-10-21
2412-2462 MHzOriginal Equipment2020-10-21

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2020-10-21PDF 2 MB
Internal photosInternal Photos2020-10-21PDF 1.9 MB
External photosExternal Photos2020-10-21PDF 218.1 KB
LabelID Label/Location Info2020-10-21PDF 51.7 KB
Test setupTest Setup Photos2020-10-21PDF 490.8 KB
Test reportTest Report2020-10-21PDF 5.4 MB
Test report part 1Test Report2020-10-21PDF 3.4 MB
Test report part 1Test Report2020-10-21PDF 3.5 MB
Test report part 2Test Report2020-10-21PDF 4.9 MB
Test report part 2Test Report2020-10-21PDF 4.9 MB
Cover letterCover Letter(s)2020-10-21PDF 44.9 KB
RF ExposureRF Exposure Info2020-10-21PDF 437.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 196.3 KB
Schematics Metadata onlySchematicsPDF 631.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 90.4 KB
Software Security Metadata onlySDR Software/Security InfPDF 274.1 KB

Application Information

Application IDqKNcLnnq6q3hC31ttvsvNA==
Final Action Date2020-10-21
Application PurposeOriginal Equipment
Applicant FRN0030011191
ModelCORV-UV-1
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionCorvus UV
Responsible PartyJackie Wu, Jackie@corvus-robotics.com , +1(512)573-9091
Test FirmSimon Lee, Shenzhen CTB Testing Technology Co., Ltd., simon@ctb-lab.com , 86 13662574496
TCB EmailDariaL@compliancetesting.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
qKNcLnnq6q3hC31ttvsvNA==2020-10-21Original Equipment
KT6qZ0wj0DIz4sjdEPg4Mg==2020-10-21Original Equipment
06zNUSLNnUAz8G3l6MrFDw==2020-10-21Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002470015CCC
2412-2462 MHz0.011170015CCC, MO
5745-5825 MHz0.011650015ECC, MO

Grants

TCB Grant - Application qKNcLnnq6q3hC31ttvsvNA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
 Date of Grant: 10/21/2020

Application Dated: 10/21/2020
Corvus Robotics, Inc.
425 Medford Street,
Boston, MA 02129
 
Attention: Jackie Wu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXMRCORV-UV-1
Name of Grantee:  Corvus Robotics, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Corvus UV
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00247  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qKNcLnnq6q3hC31ttvsvNA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Corvus Robotics, Inc.
425 Medford Street,
Boston, MA 02129
United States 		  Date of Grant: 10/21/2020

Application Dated: 10/21/2020
 
Attention: Jackie Wu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXMRCORV-UV-1
Name of Grantee:  Corvus Robotics, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Corvus UV
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00247  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application KT6qZ0wj0DIz4sjdEPg4Mg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
 Date of Grant: 10/21/2020

Application Dated: 10/21/2020
Corvus Robotics, Inc.
425 Medford Street,
Boston, MA 02129
 
Attention: Jackie Wu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXMRCORV-UV-1
Name of Grantee:  Corvus Robotics, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Corvus UV
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5745.0  -  5825.0 0.01165  

Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application KT6qZ0wj0DIz4sjdEPg4Mg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Corvus Robotics, Inc.
425 Medford Street,
Boston, MA 02129
United States 		  Date of Grant: 10/21/2020

Application Dated: 10/21/2020
 
Attention: Jackie Wu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXMRCORV-UV-1
Name of Grantee:  Corvus Robotics, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Corvus UV
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5745.0  -  5825.0 0.01165  

Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 06zNUSLNnUAz8G3l6MrFDw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
 Date of Grant: 10/21/2020

Application Dated: 10/21/2020
Corvus Robotics, Inc.
425 Medford Street,
Boston, MA 02129
 
Attention: Jackie Wu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXMRCORV-UV-1
Name of Grantee:  Corvus Robotics, Inc.
Equipment Class: Digital Transmission System
Notes: Corvus UV
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.01117  

Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 06zNUSLNnUAz8G3l6MrFDw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Corvus Robotics, Inc.
425 Medford Street,
Boston, MA 02129
United States 		  Date of Grant: 10/21/2020

Application Dated: 10/21/2020
 
Attention: Jackie Wu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXMRCORV-UV-1
Name of Grantee:  Corvus Robotics, Inc.
Equipment Class: Digital Transmission System
Notes: Corvus UV
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.01117  

Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: