FCC ID 2AXR4-LGSBR
Series 5 Single Board Radio
by Infinite Invention, Inc. DBA ConnectDER
Grantee Code: 2AXR4 Product Code: LGSBR
Latest application date: 2021-06-24
FCC ID Device Details
| FCC ID | 2AXR4-LGSBR |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AXR4 |
| Product Code | LGSBR |
| Applicant Business | Infinite Invention, Inc. DBA ConnectDER 🇺🇸 |
| Related Domains |  connectder.com |
| Equipment Class | Series 5 Single Board Radio |
| Test Firm | EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.2-927.8 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-24 |
| 902.2-927.8 MHz | Change in identification of presently authorized equipment. Original FCC ID: R7PNG0R1S3 Grant Date: 03/04/2016 | 2021-05-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photo | External Photos | 2021-05-28 | PDF 176.5 KB |
| Label | ID Label/Location Info | 2021-05-28 | PDF 39.7 KB |
| Class II PC Letter signed | Cover Letter(s) | 2021-06-24 | PDF 71.1 KB |
| Secured Signed L+G Change in ID Request | Cover Letter(s) | 2021-05-28 | PDF 90.3 KB |
| RF Exposure | RF Exposure Info | 2021-06-24 | PDF 127.4 KB |
Application Information
| Application ID | fTV4jvechpdyee8DvUx+eQ== |
|---|---|
| Final Action Date | 2021-06-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0030066575 |
| Model | LGSBR |
| Frequency Range | 902.2-927.8 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Series 5 Single Board Radio |
| Responsible Party | Jon Knauer, VP, jknauer@connectder.com , 7173687495 |
| Technical Contact | Vince Carter, Infinite Invention, Inc. DBA ConnectDER, vcarter@connectder.com , 225-247-1013 |
| Test Firm | Greg Kovolenko, EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC, greg.kovolenko@metlabs.com  , 4108444071 |
| TCB Email | jenn.warnell@metlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This C2PC is to co-locate module with FCC ID: 2AXR4- XPC200 |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fTV4jvechpdyee8DvUx+eQ== | 2021-06-24 | Class II permissive change or modification of presently authorized equipment |
| uBJE57n5XLobI8cOtpGsYg== | 2021-05-28 | Change in identification of presently authorized equipment. Original FCC ID: R7PNG0R1S3 Grant Date: 03/04/2016 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.2-927.8 MHz | 0.7900000 | 15C |
Grants
TCB Grant - Application uBJE57n5XLobI8cOtpGsYg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 05/28/2021 Application Dated: 05/28/2021 |
| Infinite Invention, Inc. DBA ConnectDER |
| PO Box 50667 |
| Arlington, VA 22205 |
| Attention: Jon Knauer , VP |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXR4-LGSBR |
| Name of Grantee: | Infinite Invention, Inc. DBA ConnectDER |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series 5 Single Board Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.79 |
| Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application uBJE57n5XLobI8cOtpGsYg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Infinite Invention, Inc. DBA ConnectDER PO Box 50667 Arlington, VA 22205 United States |
Date of Grant: 05/28/2021 Application Dated: 05/28/2021 |
| Attention: Jon Knauer , VP |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXR4-LGSBR |
| Name of Grantee: | Infinite Invention, Inc. DBA ConnectDER |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series 5 Single Board Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.79 |
| Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 06/24/2021 Application Dated: 06/24/2021 |
| Infinite Invention, Inc. DBA ConnectDER |
| PO Box 50667 |
| Arlington, VA 22205 |
| Attention: Jon Knauer , VP |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXR4-LGSBR |
| Name of Grantee: | Infinite Invention, Inc. DBA ConnectDER |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series 5 Single Board Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.79 |
| Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This C2PC is to co-locate module with FCC ID: 2AXR4- XPC200 |
EAS Grant - Application fTV4jvechpdyee8DvUx+eQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Infinite Invention, Inc. DBA ConnectDER PO Box 50667 Arlington, VA 22205 United States |
Date of Grant: 06/24/2021 Application Dated: 06/24/2021 |
| Attention: Jon Knauer , VP |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXR4-LGSBR |
| Name of Grantee: | Infinite Invention, Inc. DBA ConnectDER |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series 5 Single Board Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.79 |
| Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This C2PC is to co-locate module with FCC ID: 2AXR4- XPC200 |
| Mail To: |