FCC ID 2AXRK-HEX02DCC

Computer

by Hexagon Metrology, Inc.

Grantee Code: 2AXRK   Product Code: HEX02DCC
Latest application date: 2021-04-21

FCC ID Device Details

FCC ID2AXRK-HEX02DCC
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AXRK
Product CodeHEX02DCC
Applicant BusinessHexagon Metrology, Inc. 🇺🇸
Related Domains hexagon.com
Equipment ClassComputer
Test FirmShenzhen BALUN Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2021-04-21
2402-2480 MHzOriginal Equipment2021-04-21

Exhibits

DocumentTypeAvailableFile
User_MunaulUsers Manual2021-10-16PDF 2.2 MB
User_manualUsers Manual2021-10-16PDF 2.2 MB
Internal_PhotosInternal Photos2021-10-16PDF 4.7 MB
External_PhotosExternal Photos2021-10-16PDF 1.5 MB
External_photosExternal Photos2021-10-16PDF 1.5 MB
Label_and_Label_LocationID Label/Location Info2021-04-21PDF 565.1 KB
Test Setup PhotosTest Setup Photos2021-10-16PDF 390.5 KB
Test_SetupTest Setup Photos2021-10-16PDF 390.5 KB
Test_Setup_PhotosTest Setup Photos2021-10-16PDF 979.9 KB
BL-EC2030005-601 FCC&IC 2.4G WLAN test reportTest Report2021-04-21PDF 4.8 MB
BL-EC2030005-602 Data Part 1Test Report2021-04-21PDF 1.7 MB
BL-EC2030005-602 Data Part 2Test Report2021-04-21PDF 223.7 KB
BL-EC2030005-602 Data Part 3Test Report2021-04-21PDF 605.4 KB
BL-EC2030005-602 FCC&IC 5G WLAN test reportTest Report2021-04-21PDF 5 MB
BL-EC2030005-603 BLE FCC&IC test reportTest Report2021-04-21PDF 2 MB
BL-EC2030005-604 DFS test reportTest Report2021-04-21PDF 1.7 MB
BL-EC2030005-701 FCC SAR test reportRF Exposure Info2021-04-21PDF 2.1 MB
Agent_AuthorizationCover Letter(s)2021-04-21PDF 14.1 KB
Authorization LetterCover Letter(s)2021-04-21PDF 26.1 KB
DeclarationCover Letter(s)2021-04-21PDF 45.3 KB
DeclarationletterCover Letter(s)2021-04-21PDF 45.3 KB
FCC Software Configuration Control DeclarationCover Letter(s)2021-04-21PDF 128.4 KB
FCC_Long_Term_Confidentiality_Request_Rev4.1Cover Letter(s)2021-04-21PDF 38.6 KB
FCC_Long_Term_Only_Confidentiality_RequestCover Letter(s)2021-04-21PDF 38.6 KB
CALIBRATION REPORTRF Exposure Info2021-04-21PDF 2.3 MB
SATIMO Dipole Measurement ReportRF Exposure Info2021-04-21PDF 1.8 MB
Block_Diagram Metadata onlyBlock DiagramPDF 948.8 KB
SCH Metadata onlySchematicsPDF 1.9 MB
Schematic Metadata onlySchematicsPDF 1.9 MB
Operation_Description Metadata onlyOperational DescriptionPDF 124.2 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 270.3 KB
FCC_ICNIISoftwareSecurityInfo_2AXRK-HEX02DCC Metadata onlyParts List/Tune Up InfoPDF 493.5 KB

Application Information

Application IDuEyXSqbkBKYxtPNtqiAFiw==
Final Action Date2021-04-21
Application PurposeOriginal Equipment
Applicant FRN0030057582
ModelHEX02DCC
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionComputer
Responsible PartyPaul Witkos, Development Engineer, paul.witkos@hexagon.com , 401-886-2289
Technical ContactHexagon Metrology, Inc., paul.witkos@hexagon.com
Test FirmHanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com , 86-755-66833830
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/16/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory and simultaneous transmission use conditions is 0.84W/kg and 0.86W/kg respectively.

Applications

Application IDDatePurpose
uEyXSqbkBKYxtPNtqiAFiw==2021-04-21Original Equipment
QxsVw89g+7xh4SmAqspNKg==2021-04-21Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0033615CCC
2412-2462 MHz0.2500315CCC
5180-5240 MHz0.0776215E38, CC
5260-5320 MHz0.0744715E38, CC, ND
5500-5700 MHz0.085715E38, CC, ND
5745-5825 MHz0.0642715E38, CC

Grants

TCB Grant - Application uEyXSqbkBKYxtPNtqiAFiw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/21/2021

Application Dated: 04/21/2021
Hexagon Metrology, Inc.
250 Circuit Drive
North Kingstown, RI 02852
 
Attention: Paul Witkos , Development Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXRK-HEX02DCC
Name of Grantee:  Hexagon Metrology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.07762  
38 CC ND 15E 5260.0  -  5320.0 0.07447  
38 CC ND 15E 5500.0  -  5700.0 0.0857  
38 CC 15E 5745.0  -  5825.0 0.06427  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory and simultaneous transmission use conditions is 0.84W/kg and 0.86W/kg respectively.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application uEyXSqbkBKYxtPNtqiAFiw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hexagon Metrology, Inc.
250 Circuit Drive
North Kingstown, RI 02852
United States
  Date of Grant: 04/21/2021

Application Dated: 04/21/2021
 
Attention: Paul Witkos , Development Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXRK-HEX02DCC
Name of Grantee:  Hexagon Metrology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.07762  
38 CC ND 15E 5260.0  -  5320.0 0.07447  
38 CC ND 15E 5500.0  -  5700.0 0.0857  
38 CC 15E 5745.0  -  5825.0 0.06427  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory and simultaneous transmission use conditions is 0.84W/kg and 0.86W/kg respectively.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application QxsVw89g+7xh4SmAqspNKg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/21/2021

Application Dated: 04/21/2021
Hexagon Metrology, Inc.
250 Circuit Drive
North Kingstown, RI 02852
 
Attention: Paul Witkos , Development Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXRK-HEX02DCC
Name of Grantee:  Hexagon Metrology, Inc.
Equipment Class: Digital Transmission System
Notes: Computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00336  
CC 15C 2412.0  -  2462.0 0.25003  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory and simultaneous transmission use conditions is 0.02W/kg and 0.86W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QxsVw89g+7xh4SmAqspNKg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hexagon Metrology, Inc.
250 Circuit Drive
North Kingstown, RI 02852
United States
  Date of Grant: 04/21/2021

Application Dated: 04/21/2021
 
Attention: Paul Witkos , Development Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXRK-HEX02DCC
Name of Grantee:  Hexagon Metrology, Inc.
Equipment Class: Digital Transmission System
Notes: Computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00336  
CC 15C 2412.0  -  2462.0 0.25003  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory and simultaneous transmission use conditions is 0.02W/kg and 0.86W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: