1. FCC ID
  2. 2AXUD
  3. 2AXUD-KB1

FCC ID 2AXUD-KB1

NucBox

by Shenzhen GMK Technology Co., Ltd

Grantee Code: 2AXUD   Product Code: KB1
Latest application date: 2020-10-28

FCC ID Device Details

FCC ID2AXUD-KB1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AXUD
Product CodeKB1
Applicant BusinessShenzhen GMK Technology Co., Ltd 🇨🇳
Related Domains gmktec.com
Equipment ClassNucBox
Test FirmShenzhen Tongzhou Testing Co., LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2020-10-28
2402-2480 MHzOriginal Equipment2020-10-28
2402-2480 MHzOriginal Equipment2020-10-28

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-10-28PDF 4.7 MB
User manualUsers Manual2020-10-28PDF 4.7 MB
Internal PhotosInternal Photos2020-10-28PDF 2.2 MB
External PhotosExternal Photos2020-10-28PDF 839.3 KB
Label and Label LocationID Label/Location Info2020-10-28PDF 373 KB
Block DiagramBlock Diagram2020-10-28PDF 88 KB
Test Setup PhotosTest Setup Photos2020-10-28PDF 474.5 KB
Appendix A Test Data for BLETest Report2020-10-28PDF 2 MB
Appendix A Test Data for BTTest Report2020-10-28PDF 5.4 MB
Test report-DSSTest Report2020-10-28PDF 1.8 MB
Test report-DTS-2.4GWLAN Part1Test Report2020-10-28PDF 3.9 MB
Test report-DTS-2.4GWLAN Part2Test Report2020-10-28PDF 3.4 MB
Test report-DTS_BLETest Report2020-10-28PDF 1.4 MB
Test report-NII_Part1Test Report2020-10-28PDF 4.9 MB
Test report-NII_Part2Test Report2020-10-28PDF 3.3 MB
FCC Confidentiality request letterCover Letter(s)2020-10-28PDF 132.6 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2020-10-28PDF 244.4 KB
FCC POACover Letter(s)2020-10-28PDF 12.2 KB
UNII Device Declaration LetterCover Letter(s)2020-10-28PDF 106.5 KB
RF Exposure Info-MPERF Exposure Info2020-10-28PDF 165.1 KB
RF Exposure info-MPERF Exposure Info2020-10-28PDF 165.1 KB
Schmatic Metadata onlySchematicsPDF 862 KB
Declaration Letter of Software Security Requirements Metadata onlyOperational DescriptionPDF 318.6 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 65 KB
Operation Description Metadata onlyOperational DescriptionPDF 364.7 KB

Application Information

Application IDvzwaaejdToP6mtUoamvWrw==
Final Action Date2020-10-28
Application PurposeOriginal Equipment
Applicant FRN0030084917
ModelKB1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionNucBox
Responsible PartyJerome Chung, jeromechung@gmktec.com , 13622657317
Test FirmAndy Zhang, Shenzhen Tongzhou Testing Co., LTD, Andy.Zhang@sztz-testing.com , +86-755-32902198
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
vzwaaejdToP6mtUoamvWrw==2020-10-28Original Equipment
QTbZICb6Kud2rFHGQ1HkAw==2020-10-28Original Equipment
QEnPBAXJ9jevb3QsXsqQ0w==2020-10-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.000815CCC
2402-2480 MHz0.014300015CCC
2412-2462 MHz0.029415CCC
2422-2452 MHz0.018115CCC
5180-5240 MHz0.019315ECC
5190-5230 MHz0.018515ECC
5210 MHz0.01715ECC

Grants

TCB Grant - Application vzwaaejdToP6mtUoamvWrw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/28/2020

Application Dated: 10/28/2020
Shenzhen GMK Technology Co., Ltd
3/F, #5Bldg, HuaLian Industrial Park,
XinShi Community, Dalang St, Longhua Dist,
Shenzhen, 518109
China
 
Attention: Jerome Chung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXUD-KB1
Name of Grantee:  Shenzhen GMK Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: NucBox
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0193  
CC 15E 5190.0  -  5230.0 0.0185  
CC 15E 5210.0  -  5210.0 0.017  

Output Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application vzwaaejdToP6mtUoamvWrw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen GMK Technology Co., Ltd
3/F, #5Bldg, HuaLian Industrial Park, XinShi Community, Dalang St, Longhua Dist,
Shenzhen, 518109
China 		  Date of Grant: 10/28/2020

Application Dated: 10/28/2020
 
Attention: Jerome Chung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXUD-KB1
Name of Grantee:  Shenzhen GMK Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: NucBox
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0193  
CC 15E 5190.0  -  5230.0 0.0185  
CC 15E 5210.0  -  5210.0 0.017  

Output Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application QTbZICb6Kud2rFHGQ1HkAw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/28/2020

Application Dated: 10/28/2020
Shenzhen GMK Technology Co., Ltd
3/F, #5Bldg, HuaLian Industrial Park,
XinShi Community, Dalang St, Longhua Dist,
Shenzhen, 518109
China
 
Attention: Jerome Chung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXUD-KB1
Name of Grantee:  Shenzhen GMK Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: NucBox
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0143  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QTbZICb6Kud2rFHGQ1HkAw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen GMK Technology Co., Ltd
3/F, #5Bldg, HuaLian Industrial Park, XinShi Community, Dalang St, Longhua Dist,
Shenzhen, 518109
China 		  Date of Grant: 10/28/2020

Application Dated: 10/28/2020
 
Attention: Jerome Chung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXUD-KB1
Name of Grantee:  Shenzhen GMK Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: NucBox
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0143  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application QEnPBAXJ9jevb3QsXsqQ0w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/28/2020

Application Dated: 10/28/2020
Shenzhen GMK Technology Co., Ltd
3/F, #5Bldg, HuaLian Industrial Park,
XinShi Community, Dalang St, Longhua Dist,
Shenzhen, 518109
China
 
Attention: Jerome Chung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXUD-KB1
Name of Grantee:  Shenzhen GMK Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: NucBox
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  
CC 15C 2412.0  -  2462.0 0.0294  
CC 15C 2422.0  -  2452.0 0.0181  

Output Power listed is conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QEnPBAXJ9jevb3QsXsqQ0w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen GMK Technology Co., Ltd
3/F, #5Bldg, HuaLian Industrial Park, XinShi Community, Dalang St, Longhua Dist,
Shenzhen, 518109
China 		  Date of Grant: 10/28/2020

Application Dated: 10/28/2020
 
Attention: Jerome Chung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXUD-KB1
Name of Grantee:  Shenzhen GMK Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: NucBox
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  
CC 15C 2412.0  -  2462.0 0.0294  
CC 15C 2422.0  -  2452.0 0.0181  

Output Power listed is conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: