FCC ID 2AXW8-CTL1128A

SHINEX ACDK

by Shinex Electronic Industries Inc.

Grantee Code: 2AXW8   Product Code: CTL1128A
Latest application date: 2021-04-29

FCC ID Device Details

FCC ID2AXW8-CTL1128A
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AXW8
Product CodeCTL1128A
Applicant BusinessShinex Electronic Industries Inc. 🇹🇼
Related Domains mail.seii.com.tw
Equipment ClassSHINEX ACDK
Test FirmSporton International Inc. Hsinhua Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2021-04-29
5180-5240 MHzOriginal Equipment2021-04-29

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-04-29PDF 535 KB
Internal PhotosInternal Photos2021-04-29PDF 3.8 MB
External PhotosExternal Photos2021-04-29PDF 926.5 KB
Label InfoID Label/Location Info2021-04-29PDF 268.1 KB
Tsup DTSTest Setup Photos2021-04-29PDF 592.8 KB
Tsup NIITest Setup Photos2021-04-29PDF 565.6 KB
Test Report DTSTest Report2021-04-29PDF 3.6 MB
Test Report NIITest Report2021-04-29PDF 3.3 MB
Confidentiality LetterCover Letter(s)2021-04-29PDF 336.6 KB
POA LetterCover Letter(s)2021-04-29PDF 343.3 KB
SDoC LetterCover Letter(s)2021-04-29PDF 252.9 KB
MPE ReportRF Exposure Info2021-04-29PDF 366.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 174.9 KB
Schematics Metadata onlySchematicsPDF 977.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 271 KB
SW Op Desc Metadata onlySDR Software/Security InfPDF 43.3 KB

Application Information

Application IDJUHxeeYC+svBoUJXJ6UAjA==
Final Action Date2021-04-29
Application PurposeOriginal Equipment
Applicant FRN0030111793
ModelCTL1128A
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionSHINEX ACDK
Responsible PartyPolo Chen, Process Engineer, polo1126_chen@mail.seii.com.tw , +886-2-2228-8355
Test FirmAlex Chen, Sporton International Inc. Hsinhua Laboratory, alex@sporton.com.tw , 886-3-327-3456
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
JUHxeeYC+svBoUJXJ6UAjA==2021-04-29Original Equipment
0Dr1soxQwXglsSYsBzR+ww==2021-04-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.553000015CCC, MO
5180-5240 MHz0.1615ECC, MO
5745-5825 MHz0.6515ECC, MO

Grants

TCB Grant - Application JUHxeeYC+svBoUJXJ6UAjA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/29/2021

Application Dated: 04/28/2021
Shinex Electronic Industries Inc.
2F., No. 139, Jian 1st Rd., Zhonghe Dist.
New Taipei City, 235
Taiwan
 
Attention: Polo Chen , Process Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXW8-CTL1128A
Name of Grantee:  Shinex Electronic Industries Inc.
Equipment Class: Digital Transmission System
Notes: SHINEX ACDK
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.553  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application JUHxeeYC+svBoUJXJ6UAjA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shinex Electronic Industries Inc.
2F., No. 139, Jian 1st Rd., Zhonghe Dist.
New Taipei City, 235
Taiwan
  Date of Grant: 04/29/2021

Application Dated: 04/28/2021
 
Attention: Polo Chen , Process Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXW8-CTL1128A
Name of Grantee:  Shinex Electronic Industries Inc.
Equipment Class: Digital Transmission System
Notes: SHINEX ACDK
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.553  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 0Dr1soxQwXglsSYsBzR+ww==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/29/2021

Application Dated: 04/28/2021
Shinex Electronic Industries Inc.
2F., No. 139, Jian 1st Rd., Zhonghe Dist.
New Taipei City, 235
Taiwan
 
Attention: Polo Chen , Process Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXW8-CTL1128A
Name of Grantee:  Shinex Electronic Industries Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SHINEX ACDK
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.16  
CC MO 15E 5745.0  -  5825.0 0.65  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 0Dr1soxQwXglsSYsBzR+ww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shinex Electronic Industries Inc.
2F., No. 139, Jian 1st Rd., Zhonghe Dist.
New Taipei City, 235
Taiwan
  Date of Grant: 04/29/2021

Application Dated: 04/28/2021
 
Attention: Polo Chen , Process Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AXW8-CTL1128A
Name of Grantee:  Shinex Electronic Industries Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SHINEX ACDK
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.16  
CC MO 15E 5745.0  -  5825.0 0.65  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: