FCC ID 2AXYK-K3MAX
3D Printer
by Shenzhen Anycubic Technology Co.,Ltd
Grantee Code: 2AXYK Product Code: K3MAX
Latest application date: 2025-01-03
FCC ID Device Details
| FCC ID | 2AXYK-K3MAX |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AXYK |
| Product Code | K3MAX |
| Applicant Business | Shenzhen Anycubic Technology Co.,Ltd 🇨🇳 |
| Related Domains |  anycubic.com |
| Equipment Class | 3D Printer |
| Test Firm | Shenzhen LCS Compliance Testing Laboratory Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2025-01-03 |
| 2402-2480 MHz | Original Equipment | 2025-01-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2025-02-17 | PDF 2.9 MB |
| Internal photos | Internal Photos | 2025-02-17 | PDF 2.9 MB |
| External photos | External Photos | 2025-02-17 | PDF 846.3 KB |
| Label and label location | ID Label/Location Info | 2025-01-03 | PDF 439.9 KB |
| Test setup photos | Test Setup Photos | 2025-02-17 | PDF 1.2 MB |
| Antenna information | Test Report | 2025-01-03 | PDF 411.4 KB |
| Appendix A test data BT | Test Report | 2025-01-03 | PDF 4.4 MB |
| Appendix B test data BT LE | Test Report | 2025-01-03 | PDF 1.4 MB |
| Appendix C test data 2G4WLAN | Test Report | 2025-01-03 | PDF 4.3 MB |
| Test Report 2G4WLAN | Test Report | 2025-01-03 | PDF 2.4 MB |
| Test Report BT | Test Report | 2025-01-03 | PDF 2.4 MB |
| Test Report BT LE | Test Report | 2025-01-03 | PDF 2.1 MB |
| Agent attestation letter | Attestation Statements | 2025-01-03 | PDF 351.5 KB |
| Covered equipment letter | Attestation Statements | 2025-01-03 | PDF 178.6 KB |
| Confidentiality request letter | Cover Letter(s) | 2025-01-03 | PDF 167.7 KB |
| Confidentiality short term tequest letter | Cover Letter(s) | 2025-01-03 | PDF 172.6 KB |
| Letter of declaration disable channel 12 and 13 by software | Cover Letter(s) | 2025-01-03 | PDF 132.1 KB |
| Letter of declaration model difference | Cover Letter(s) | 2025-01-03 | PDF 118.7 KB |
| RF exposure evaluation | RF Exposure Info | 2025-01-03 | PDF 608.4 KB |
| Block diagram Metadata only | Block Diagram | PDF 36.9 KB | |
| Schematic Metadata only | Schematics | PDF 480 KB | |
| Operation description Metadata only | Operational Description | PDF 114.1 KB |
Application Information
| Application ID | z28ep0kztEn29RIGVa4GCw== |
|---|---|
| Final Action Date | 2025-01-03 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0030126130 |
| Model | K3MAX |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 3D Printer |
| Responsible Party | xianping sun, sunxianping@anycubic.com , 18682218561 |
| Test Firm | Gavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com  , 0755-82591330 |
| TCB Email | o.kneip@kl-certification.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Short-Term Confidentiality Date | 02/17/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is maximum peak conducted output power. The device supports both 20 MHz and 40 MHz bandwidth modes as described in this filing. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device also contains Bluetooth transmitters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| z28ep0kztEn29RIGVa4GCw== | 2025-01-03 | Original Equipment |
| Tg+ZvMcUN9L8seqcRHPp2w== | 2025-01-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application z28ep0kztEn29RIGVa4GCw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 01/03/2025 Application Dated: 01/03/2025 |
| Shenzhen Anycubic Technology Co.,Ltd |
| 12-13th floor,Building #3B,Vanke Times Square, |
| No.85 Longcheng Avenue,Longcheng Street, |
| Longgang District,Shenzhen,Guangdong Province,, 518000 China |
| Attention: xianping sun |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXYK-K3MAX |
| Name of Grantee: | Shenzhen Anycubic Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0011 | |||
| 15C | 2412.0 - 2462.0 | 0.0361 |
| Power listed is maximum peak conducted output power. The device supports both 20 MHz and 40 MHz bandwidth modes as described in this filing. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device also contains Bluetooth transmitters. |
EAS Grant - Application z28ep0kztEn29RIGVa4GCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Anycubic Technology Co.,Ltd 12-13th floor,Building #3B,Vanke Times Square, No.85 Longcheng Avenue,Longcheng Street, Longgang District,Shenzhen,Guangdong Province,, 518000 China |
Date of Grant: 01/03/2025 Application Dated: 01/03/2025 |
| Attention: xianping sun |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXYK-K3MAX |
| Name of Grantee: | Shenzhen Anycubic Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0011 | |||
| 15C | 2412.0 - 2462.0 | 0.0361 |
| Power listed is maximum peak conducted output power. The device supports both 20 MHz and 40 MHz bandwidth modes as described in this filing. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device also contains Bluetooth transmitters. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 01/03/2025 Application Dated: 01/03/2025 |
| Shenzhen Anycubic Technology Co.,Ltd |
| 12-13th floor,Building #3B,Vanke Times Square, |
| No.85 Longcheng Avenue,Longcheng Street, |
| Longgang District,Shenzhen,Guangdong Province,, 518000 China |
| Attention: xianping sun |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXYK-K3MAX |
| Name of Grantee: | Shenzhen Anycubic Technology Co.,Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0013 |
| Power listed is maximum peak conducted output power. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device also contains 2.4GHz WLAN and BLE transmitters. |
EAS Grant - Application Tg+ZvMcUN9L8seqcRHPp2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Anycubic Technology Co.,Ltd 12-13th floor,Building #3B,Vanke Times Square, No.85 Longcheng Avenue,Longcheng Street, Longgang District,Shenzhen,Guangdong Province,, 518000 China |
Date of Grant: 01/03/2025 Application Dated: 01/03/2025 |
| Attention: xianping sun |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AXYK-K3MAX |
| Name of Grantee: | Shenzhen Anycubic Technology Co.,Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0013 |
| Power listed is maximum peak conducted output power. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device also contains 2.4GHz WLAN and BLE transmitters. |
| Mail To: |