FCC ID 2AY4A-TINA2S
3D printer
by Jiangsu Wiiboox Technology Co., Ltd.
Grantee Code: 2AY4A Product Code: TINA2S
Latest application date: 2024-08-05
FCC ID Device Details
| FCC ID | 2AY4A-TINA2S |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AY4A |
| Product Code | TINA2S |
| Applicant Business | Jiangsu Wiiboox Technology Co., Ltd. 🇨🇳 |
| Related Domains |  wiibooxtech.com |
| Equipment Class | 3D printer |
| Test Firm | Shenzhen HUAK Testing Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2024-08-05 |
| 2402-2480 MHz | Original Equipment | 2024-08-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2025-01-28 | PDF 3.4 MB |
| Internal photos | Internal Photos | 2025-01-28 | PDF 4.2 MB |
| internal photo | Internal Photos | 2025-01-28 | PDF 4.2 MB |
| External Photographs | External Photos | 2025-01-28 | PDF 2.1 MB |
| External Photos | External Photos | 2025-01-28 | PDF 2.1 MB |
| Label | ID Label/Location Info | 2024-08-05 | PDF 82.7 KB |
| Test Setup Photos | Test Setup Photos | 2024-08-05 | PDF 355.1 KB |
| ANTENNA report | Test Report | 2024-08-05 | PDF 1 MB |
| Antenna Specification | Test Report | 2024-08-05 | PDF 1 MB |
| Test Report | Test Report | 2024-08-05 | PDF 3.5 MB |
| Test Report | Test Report | 2024-08-05 | PDF 3.9 MB |
| test report | Test Report | 2024-08-05 | PDF 3.7 MB |
| test report | Test Report | 2024-08-05 | PDF 6 MB |
| Certification Equipment Type | Attestation Statements | 2024-08-05 | PDF 105.3 KB |
| Certificiation Applicant | Attestation Statements | 2024-08-05 | PDF 89.7 KB |
| US Agent for Service of Process | Attestation Statements | 2024-08-05 | PDF 853.2 KB |
| US agent | Attestation Statements | 2024-08-05 | PDF 853.2 KB |
| Agent Authorization | Cover Letter(s) | 2024-08-05 | PDF 68.6 KB |
| FCC Long Term Only Confidentiality Request Rev4.1 | Cover Letter(s) | 2024-08-05 | PDF 15.7 KB |
| Model Difference | Cover Letter(s) | 2024-08-05 | PDF 54 KB |
| Model Difference Declaration | Cover Letter(s) | 2024-08-05 | PDF 54 KB |
| MPE | RF Exposure Info | 2024-08-05 | PDF 13.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 249.6 KB | |
| Schematics Metadata only | Schematics | PDF 247.8 KB | |
| Operation Description Metadata only | Operational Description | PDF 83.9 KB |
Application Information
| Application ID | QaD0VUVl8/MlxryW+wf/mQ== |
|---|---|
| Final Action Date | 2024-08-05 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0030643563 |
| Model | TINA2S |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 3D printer |
| Responsible Party | Bruce Xu, bruce@wiibooxtech.com , 025-86169137 |
| Technical Contact | Jiangsu Wiiboox Technology Co., Ltd, bruce@wiibooxtech.com |
| Test Firm | Jason Zhou, Shenzhen HUAK Testing Technology Co., Ltd., jason@cer-mark.com  , 86-755-23029901 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/28/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QaD0VUVl8/MlxryW+wf/mQ== | 2024-08-05 | Original Equipment |
| MY/nHwV4rKk789p3A/rniw== | 2024-08-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application QaD0VUVl8/MlxryW+wf/mQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/05/2024 Application Dated: 08/05/2024 |
| Jiangsu Wiiboox Technology Co., Ltd. |
| Xingmin Industrial Park, No. 128 Keyuan Road, |
| Jiangning District, |
| Nanjing, Jiangsu Province, China |
| Attention: Bruce Xu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AY4A-TINA2S |
| Name of Grantee: | Jiangsu Wiiboox Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0022 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.02323 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QaD0VUVl8/MlxryW+wf/mQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Jiangsu Wiiboox Technology Co., Ltd. Xingmin Industrial Park, No. 128 Keyuan Road, Jiangning District, Nanjing, Jiangsu Province, China |
Date of Grant: 08/05/2024 Application Dated: 08/05/2024 |
| Attention: Bruce Xu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AY4A-TINA2S |
| Name of Grantee: | Jiangsu Wiiboox Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0022 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.02323 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/05/2024 Application Dated: 08/05/2024 |
| Jiangsu Wiiboox Technology Co., Ltd. |
| Xingmin Industrial Park, No. 128 Keyuan Road, |
| Jiangning District, |
| Nanjing, Jiangsu Province, China |
| Attention: Bruce Xu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AY4A-TINA2S |
| Name of Grantee: | Jiangsu Wiiboox Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 3D printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0044 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application MY/nHwV4rKk789p3A/rniw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Jiangsu Wiiboox Technology Co., Ltd. Xingmin Industrial Park, No. 128 Keyuan Road, Jiangning District, Nanjing, Jiangsu Province, China |
Date of Grant: 08/05/2024 Application Dated: 08/05/2024 |
| Attention: Bruce Xu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AY4A-TINA2S |
| Name of Grantee: | Jiangsu Wiiboox Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 3D printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0044 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |