FCC ID 2AYDI-MURABZ
Module product with 902-928MHz Transceiver
by Giatec Scientific Inc.
Grantee Code: 2AYDI Product Code: MURABZ
Latest application date: 2024-07-30
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-914.9 MHz | Class II permissive change or modification of presently authorized equipment | 2024-07-30 |
| 902.3-914.9 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 09/07/2021 | 2024-05-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2024-07-30 | PDF 469.9 KB |
| External Photos | External Photos | 2024-05-06 | PDF 76.2 KB |
| Label Information | ID Label/Location Info | 2024-07-30 | PDF 248.7 KB |
| Label Information | ID Label/Location Info | 2024-05-06 | PDF 70.3 KB |
| Test Setup Photos | Test Setup Photos | 2024-07-30 | PDF 290.5 KB |
| Antenna Info | Test Report | 2024-07-30 | PDF 1.6 MB |
| Test Report | Test Report | 2024-07-30 | PDF 926.4 KB |
| 2.911(d)(5)(i)-(ii) Covered Equipment | Attestation Statements | 2024-07-30 | PDF 211.6 KB |
| 2.911(d)(7) Agent of Service | Attestation Statements | 2024-07-30 | PDF 205.2 KB |
| C2PC Cover Letter | Cover Letter(s) | 2024-07-30 | PDF 134.7 KB |
| Change in ID Authorization | Cover Letter(s) | 2024-05-06 | PDF 96.2 KB |
| Change in ID Request Letter | Cover Letter(s) | 2024-05-06 | PDF 135.5 KB |
| RF Exposure | RF Exposure Info | 2024-07-30 | PDF 12.7 KB |
Application Information
| Application ID | Jln0X9fWrvIaSuoVidgjog== |
|---|---|
| Final Action Date | 2024-07-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0030257224 |
| Model | MURABZ |
| Frequency Range | 902.3-914.9 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Module product with 902-928MHz Transceiver |
| Responsible Party | Mustafa Salehi, Director, Product Development, mustafa@giatec.ca  , +1 613-319-3510 |
| Test Firm | William (Mac) Elliott, TUV SUD CANADA, INC., william.elliott@tuvsud.com  , 813-284-2736 |
| TCB Email | jeff.woods@tuvsud.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations, the antenna gain, including cable loss, must not exceed 2dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. C2PC to add new antenna/host combination as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Jln0X9fWrvIaSuoVidgjog== | 2024-07-30 | Class II permissive change or modification of presently authorized equipment |
| GMGIih0N7EGtb0/NQUGQQw== | 2024-05-06 | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 09/07/2021 |
Grants
TCB Grant - Application Jln0X9fWrvIaSuoVidgjog==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 07/30/2024 Application Dated: 07/30/2024 |
| Giatec Scientific Inc. |
| 245 Menten Place, suite 300 |
| Ottawa, K2H 9E8 Canada |
| Attention: Mustafa Salehi , Director, Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDI-MURABZ |
| Name of Grantee: | Giatec Scientific Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module product with 902-928MHz Transceiver |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations, the antenna gain, including cable loss, must not exceed 2dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. C2PC to add new antenna/host combination as described in this filing. |
EAS Grant - Application Jln0X9fWrvIaSuoVidgjog==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Giatec Scientific Inc. 245 Menten Place, suite 300 Ottawa, K2H 9E8 Canada |
Date of Grant: 07/30/2024 Application Dated: 07/30/2024 |
| Attention: Mustafa Salehi , Director, Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDI-MURABZ |
| Name of Grantee: | Giatec Scientific Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module product with 902-928MHz Transceiver |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations, the antenna gain, including cable loss, must not exceed 2dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. C2PC to add new antenna/host combination as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 05/06/2024 Application Dated: 05/06/2024 |
| Giatec Scientific Inc. |
| 245 Menten Place, suite 300 |
| Ottawa, K2H 9E8 Canada |
| Attention: Mustafa Salehi , Director, Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDI-MURABZ |
| Name of Grantee: | Giatec Scientific Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module product with 902-928MHz Transceiver |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations, the antenna gain, including cable loss, must not exceed 2dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application GMGIih0N7EGtb0/NQUGQQw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Giatec Scientific Inc. 245 Menten Place, suite 300 Ottawa, K2H 9E8 Canada |
Date of Grant: 05/06/2024 Application Dated: 05/06/2024 |
| Attention: Mustafa Salehi , Director, Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDI-MURABZ |
| Name of Grantee: | Giatec Scientific Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module product with 902-928MHz Transceiver |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations, the antenna gain, including cable loss, must not exceed 2dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: |