FCC ID 2AYDT-SC21001
Communication Module
by Syng, Inc.
Grantee Code: 2AYDT Product Code: SC21001
Latest application date: 2021-05-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-18 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-18 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1VA Grant Date: 06/21/2019 | 2021-04-13 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1VA Grant Date: 06/21/2019 | 2021-04-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2021-05-18 | PDF 660.3 KB |
| External Photos | External Photos | 2021-04-13 | PDF 423.5 KB |
| Label and Label Location | ID Label/Location Info | 2021-05-18 | PDF 533.1 KB |
| Label and Label Location | ID Label/Location Info | 2021-04-13 | PDF 432.3 KB |
| Operational Description | Operational Description | 2021-05-18 | PDF 987.2 KB |
| Operational Dscription | Operational Description | 2021-05-18 | PDF 987.2 KB |
| Test Report | Test Report | 2021-05-18 | PDF 3.1 MB |
| Cover Letters | Cover Letter(s) | 2021-05-18 | PDF 61.5 KB |
| Cover Letters | Cover Letter(s) | 2021-04-13 | PDF 173.7 KB |
| RF Exposure info | RF Exposure Info | 2021-05-18 | PDF 262.5 KB |
Application Information
| Application ID | pgCF1KhX45ac5aB511odRQ== |
|---|---|
| Final Action Date | 2021-05-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0030265896 |
| Model | SC21001 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Communication Module |
| Responsible Party | Marc Carino, Director, Hardware Systems Engineering, electronics@syng.la  , 424-289-4554 |
| Test Firm | Charles Neal, Nemko USA, Inc. - San Diego EMC Division, charles.neal@nemko.com  , 613-737-9680 x239 |
| TCB Email | jin.xu@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to integrate this module into host platform, model no. Cell Alpha and antennas as described in this filing. Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pgCF1KhX45ac5aB511odRQ== | 2021-05-18 | Class II permissive change or modification of presently authorized equipment |
| BbCKjLSsm756XtgnXwY6ag== | 2021-05-18 | Class II permissive change or modification of presently authorized equipment |
| ydbdU6E1j0xz0c8NYRMdqw== | 2021-04-13 | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1VA Grant Date: 06/21/2019 |
| Q9oHtLlQHiLgHDWa34GkAg== | 2021-04-13 | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1VA Grant Date: 06/21/2019 |
Equipment Authorization
Grants
TCB Grant - Application ydbdU6E1j0xz0c8NYRMdqw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/13/2021 Application Dated: 04/13/2021 |
| Syng, Inc. |
| 120 Mildred Avenue |
| Venice, CA 90291 |
| Attention: Marc Carino , Director, Hardware Systems Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDT-SC21001 |
| Name of Grantee: | Syng, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.078 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.073 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.078 |
| Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz and 5775 MHz. DFS operation is slave without radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ydbdU6E1j0xz0c8NYRMdqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Syng, Inc. 120 Mildred Avenue Venice, CA 90291 United States |
Date of Grant: 04/13/2021 Application Dated: 04/13/2021 |
| Attention: Marc Carino , Director, Hardware Systems Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDT-SC21001 |
| Name of Grantee: | Syng, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.078 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.073 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.078 |
| Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz and 5775 MHz. DFS operation is slave without radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/13/2021 Application Dated: 04/12/2021 |
| Syng, Inc. |
| 120 Mildred Avenue |
| Venice, CA 90291 |
| Attention: Marc Carino , Director, Hardware Systems Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDT-SC21001 |
| Name of Grantee: | Syng, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.52 |
| Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Q9oHtLlQHiLgHDWa34GkAg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Syng, Inc. 120 Mildred Avenue Venice, CA 90291 United States |
Date of Grant: 04/13/2021 Application Dated: 04/12/2021 |
| Attention: Marc Carino , Director, Hardware Systems Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDT-SC21001 |
| Name of Grantee: | Syng, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.52 |
| Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/18/2021 Application Dated: 05/14/2021 |
| Syng, Inc. |
| 120 Mildred Avenue |
| Venice, CA 90291 |
| Attention: Marc Carino , Director, Hardware Systems Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDT-SC21001 |
| Name of Grantee: | Syng, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.52 |
| Class II Permissive Change to integrate this module into host platform, model no. Cell Alpha and antennas as described in this filing. Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application pgCF1KhX45ac5aB511odRQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Syng, Inc. 120 Mildred Avenue Venice, CA 90291 United States |
Date of Grant: 05/18/2021 Application Dated: 05/14/2021 |
| Attention: Marc Carino , Director, Hardware Systems Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDT-SC21001 |
| Name of Grantee: | Syng, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.52 |
| Class II Permissive Change to integrate this module into host platform, model no. Cell Alpha and antennas as described in this filing. Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/18/2021 Application Dated: 05/14/2021 |
| Syng, Inc. |
| 120 Mildred Avenue |
| Venice, CA 90291 |
| Attention: Marc Carino , Director, Hardware Systems Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDT-SC21001 |
| Name of Grantee: | Syng, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.078 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.073 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.078 |
| Class II Permissive Change to integrate this module into host platform, model no. Cell Alpha and antennas as described in this filing. Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz and 5775 MHz. DFS operation is slave without radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application BbCKjLSsm756XtgnXwY6ag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Syng, Inc. 120 Mildred Avenue Venice, CA 90291 United States |
Date of Grant: 05/18/2021 Application Dated: 05/14/2021 |
| Attention: Marc Carino , Director, Hardware Systems Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYDT-SC21001 |
| Name of Grantee: | Syng, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.078 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.073 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.078 |
| Class II Permissive Change to integrate this module into host platform, model no. Cell Alpha and antennas as described in this filing. Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz and 5775 MHz. DFS operation is slave without radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |