FCC ID 2AYEQSM1

DESIGNA Smart Move

by DESIGNA Verkehrsleittechnik GmbH

Grantee Code: 2AYEQ   Product Code: SM1
Latest application date: 2021-03-08

FCC ID Device Details

FCC ID2AYEQSM1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AYEQ
Product CodeSM1
Applicant BusinessDESIGNA Verkehrsleittechnik GmbH 🇩🇪
Related Domains designa.com
Equipment ClassDESIGNA Smart Move
Test FirmTUV Rheinland Sweden AB

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-08
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: SQGBL652 Grant Date: 08/31/20162021-02-22

Exhibits

DocumentTypeAvailableFile
Product ManualUsers Manual2021-09-04PDF 830.1 KB
Photos InternalInternal Photos2021-09-04PDF 738.3 KB
Photos ExternalExternal Photos2021-09-04PDF 313.4 KB
Photos ExternalExternal Photos2021-02-22PDF 175 KB
Product label on hostID Label/Location Info2021-03-08PDF 405.6 KB
Product LabelID Label/Location Info2021-02-22PDF 246 KB
Test setup PhotosTest Setup Photos2021-09-04PDF 440.5 KB
Test Report FCCTest Report2021-03-08PDF 2.4 MB
Agent letterCover Letter(s)2021-03-08PDF 545.9 KB
C2PC LetterCover Letter(s)2021-03-08PDF 445.3 KB
Confidentiality LetterCover Letter(s)2021-03-08PDF 633.9 KB
Declaration of Similarity LetterCover Letter(s)2021-03-08PDF 398.8 KB
Agency AuthorizationCover Letter(s)2021-02-22PDF 545.9 KB
Cover letter New Grantee-Change ID Request LetterCover Letter(s)2021-02-22PDF 467.7 KB
Cover letter Original Grantee Change ID Authorization LetterCover Letter(s)2021-02-22PDF 380.6 KB
Maximum Permissible ExposureRF Exposure Info2021-03-08PDF 113.6 KB
Block diagram Metadata onlyBlock DiagramPDF 579.3 KB
Schematics Metadata onlySchematicsPDF 102 KB
Antenna specification Metadata onlyOperational DescriptionPDF 448.5 KB
Operation description Metadata onlyOperational DescriptionPDF 450.6 KB

Application Information

Application IDH/1CQZ7l+a5sfanVu9ogZA==
Final Action Date2021-03-08
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0030271423
ModelSM1
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDESIGNA Smart Move
Responsible PartyTimo Klein, fcc@designa.com , +494315336178
Technical ContactTimo Klein, DESIGNA Verkehrsleittechnik GmbH, fcc@designa.com
Test FirmPer Isacsson, TUV Rheinland Sweden AB, per.isacsson@se.tuv.com , +46706015822
TCB Emailtcb-hotline@tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/04/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change for accommodation the module into the Host system DESIGNA Smart Move. Power Output listed is Peak conducted.The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
H/1CQZ7l+a5sfanVu9ogZA==2021-03-08Class II permissive change or modification of presently authorized equipment
QMjpGFXw8GsXQhVO9MrsYQ==2021-02-22Change in identification of presently authorized equipment. Original FCC ID: SQGBL652 Grant Date: 08/31/2016

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.003000015C

Grants

TCB Grant - Application QMjpGFXw8GsXQhVO9MrsYQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 02/22/2021

Application Dated: 02/22/2021
DESIGNA Verkehrsleittechnik GmbH
Faluner Weg 3
Kiel, 24109
Germany
 
Attention: Timo Klein

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYEQSM1
Name of Grantee:  DESIGNA Verkehrsleittechnik GmbH
Equipment Class: Digital Transmission System
Notes: Bluetooth 4.2 module (BLE only)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

Output power listed is peak conducted.

EAS Grant - Application QMjpGFXw8GsXQhVO9MrsYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DESIGNA Verkehrsleittechnik GmbH
Faluner Weg 3
Kiel, 24109
Germany
  Date of Grant: 02/22/2021

Application Dated: 02/22/2021
 
Attention: Timo Klein

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYEQSM1
Name of Grantee:  DESIGNA Verkehrsleittechnik GmbH
Equipment Class: Digital Transmission System
Notes: Bluetooth 4.2 module (BLE only)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

Output power listed is peak conducted.



TCB Grant - Application H/1CQZ7l+a5sfanVu9ogZA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 03/08/2021

Application Dated: 03/08/2021
DESIGNA Verkehrsleittechnik GmbH
Faluner Weg 3
Kiel, 24109
Germany
 
Attention: Timo Klein

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYEQSM1
Name of Grantee:  DESIGNA Verkehrsleittechnik GmbH
Equipment Class: Digital Transmission System
Notes: DESIGNA Smart Move
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

Class II Permissive Change for accommodation the module into the Host system DESIGNA Smart Move. Power Output listed is Peak conducted.The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application H/1CQZ7l+a5sfanVu9ogZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DESIGNA Verkehrsleittechnik GmbH
Faluner Weg 3
Kiel, 24109
Germany
  Date of Grant: 03/08/2021

Application Dated: 03/08/2021
 
Attention: Timo Klein

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYEQSM1
Name of Grantee:  DESIGNA Verkehrsleittechnik GmbH
Equipment Class: Digital Transmission System
Notes: DESIGNA Smart Move
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

Class II Permissive Change for accommodation the module into the Host system DESIGNA Smart Move. Power Output listed is Peak conducted.The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: