FCC ID 2AYHX00347
Wittra Gateway
by Wittra Sweden AB
Grantee Code: 2AYHX Product Code: 00347
Latest application date: 2021-07-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2021-07-27 |
| 902.2-927.8 MHz | Original Equipment | 2021-07-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2021-07-27 | PDF 2.1 MB |
| Int 1 | Internal Photos | 2021-07-27 | PDF 264.3 KB |
| Int 1 | Internal Photos | 2021-07-27 | PDF 1 MB |
| Int 2 | Internal Photos | 2021-07-27 | PDF 292.3 KB |
| Int 2 | Internal Photos | 2021-07-27 | PDF 1 MB |
| Int 3 | Internal Photos | 2021-07-27 | PDF 2.4 MB |
| Int 3 | Internal Photos | 2021-07-27 | PDF 264.3 KB |
| Int 4 | Internal Photos | 2021-07-27 | PDF 292.3 KB |
| Int 4 | Internal Photos | 2021-07-27 | PDF 1 MB |
| Int 5 | Internal Photos | 2021-07-27 | PDF 2.4 MB |
| Int 5 | Internal Photos | 2021-07-27 | PDF 1 MB |
| Int 6 | Internal Photos | 2021-07-27 | PDF 3.4 MB |
| Label | Internal Photos | 2021-07-27 | PDF 418.9 KB |
| Ext Back | External Photos | 2021-07-27 | PDF 1.1 MB |
| Ext Bottom | External Photos | 2021-07-27 | PDF 812.3 KB |
| Ext Front | External Photos | 2021-07-27 | PDF 1.3 MB |
| Ext Side | External Photos | 2021-07-27 | PDF 980.2 KB |
| Int 4 | ID Label/Location Info | 2021-07-27 | PDF 3.4 MB |
| Label | ID Label/Location Info | 2021-07-27 | PDF 418.9 KB |
| 15B Setup | Test Setup Photos | 2021-07-27 | PDF 1.5 MB |
| Setup | Test Setup Photos | 2021-07-27 | PDF 2.5 MB |
| Setup | Test Setup Photos | 2021-07-27 | PDF 2.5 MB |
| 15B | Test Report | 2021-07-27 | PDF 1.2 MB |
| BR | Test Report | 2021-07-27 | PDF 2.5 MB |
| RPi | Test Report | 2021-07-27 | PDF 1.3 MB |
| Test Report | Test Report | 2021-07-27 | PDF 3.4 MB |
| Agent Authorization | Cover Letter(s) | 2021-07-27 | PDF 121.4 KB |
| Confid | Cover Letter(s) | 2021-07-27 | PDF 125.7 KB |
| RFx | RF Exposure Info | 2021-07-27 | PDF 762.6 KB |
| Block Metadata only | Block Diagram | PDF 94.8 KB | |
| Schema 1 Metadata only | Schematics | PDF 1.6 MB | |
| Schema 2 Metadata only | Schematics | PDF 1.7 MB | |
| FHSS Descript Metadata only | Operational Description | PDF 36.7 KB | |
| Hardware Spec Metadata only | Operational Description | PDF 614.6 KB | |
| BOM 1 Metadata only | Parts List/Tune Up Info | PDF 42.2 KB | |
| BOM 2 Metadata only | Parts List/Tune Up Info | PDF 29.4 KB | |
| BOM 2 Metadata only | Parts List/Tune Up Info | PDF 60 KB |
Application Information
| Application ID | Lc6QLCsOyY3RnDLYcVHOZA== |
|---|---|
| Final Action Date | 2021-07-27 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0030274765 |
| Model | 00347 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wittra Gateway |
| Responsible Party | Thomas Lars Bennet, CEO, thomas.bennet@wittra.se |
| Technical Contact | Warwick Taws, Wittra Sweden AB, wat@wittra.se |
| Test Firm | Per Isacsson, TUV Rheinland Sweden AB, per.isacsson@se.tuv.com |
| TCB Email | wgraff@us.tuv.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/22/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Lc6QLCsOyY3RnDLYcVHOZA== | 2021-07-27 | Original Equipment |
| A0IyTZ/MTWEOx9tfrE9Kog== | 2021-07-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Lc6QLCsOyY3RnDLYcVHOZA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 07/27/2021 Application Dated: 07/27/2021 |
| Wittra Sweden AB |
| Rosenlundsgatan 40 |
| Stockholm, 11853 Sweden |
| Attention: Thomas Bennet , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYHX00347 |
| Name of Grantee: | Wittra Sweden AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wittra Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0014 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0017 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Lc6QLCsOyY3RnDLYcVHOZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wittra Sweden AB Rosenlundsgatan 40 Stockholm, 11853 Sweden |
Date of Grant: 07/27/2021 Application Dated: 07/27/2021 |
| Attention: Thomas Bennet , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYHX00347 |
| Name of Grantee: | Wittra Sweden AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wittra Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0014 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0017 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 07/27/2021 Application Dated: 07/27/2021 |
| Wittra Sweden AB |
| Rosenlundsgatan 40 |
| Stockholm, 11853 Sweden |
| Attention: Thomas Bennet , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYHX00347 |
| Name of Grantee: | Wittra Sweden AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wittra Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.2 - 927.8 | 0.0085 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application A0IyTZ/MTWEOx9tfrE9Kog==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wittra Sweden AB Rosenlundsgatan 40 Stockholm, 11853 Sweden |
Date of Grant: 07/27/2021 Application Dated: 07/27/2021 |
| Attention: Thomas Bennet , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYHX00347 |
| Name of Grantee: | Wittra Sweden AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wittra Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.2 - 927.8 | 0.0085 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |