FCC ID 2AYHY-EM400

IoT Sensor

by Xiamen Milesight IoT Co., Ltd.

Grantee Code: 2AYHY   Product Code: EM400
Latest application date: 2023-04-21

FCC ID Device Details

FCC ID2AYHY-EM400
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AYHY
Product CodeEM400
Applicant BusinessXiamen Milesight IoT Co., Ltd. 🇨🇳
Related Domains ursalink.com
Equipment ClassIoT Sensor
Test FirmCHINA CERTIFICATION ICT CO., LTD (DONGGUAN)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.3-927.6 MHzOriginal Equipment2023-04-21
903-926.9 MHzOriginal Equipment2023-04-21

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-04-21PDF 439.2 KB
Internal Photos Part 1Internal Photos2023-04-21PDF 5.3 MB
Internal Photos Part 2Internal Photos2023-04-21PDF 1.1 MB
External PhotosExternal Photos2023-04-21PDF 2.1 MB
Label & Label LocationID Label/Location Info2023-04-21PDF 290.6 KB
Test Setup PhotosTest Setup Photos2023-04-21PDF 658.2 KB
Test Setup PhotosTest Setup Photos2023-04-21PDF 202.7 KB
Antenna ReportTest Report2023-04-21PDF 2.6 MB
Test ReportTest Report2023-04-21PDF 638.7 KB
Test ReportTest Report2023-04-21PDF 642.8 KB
2.911 (d)(5)(i)(ii) Attestation StatementAttestation Statements2023-04-21PDF 141.8 KB
US Agent Attestation LetterAttestation Statements2023-04-21PDF 60.8 KB
DoS LetterCover Letter(s)2023-04-21PDF 30.5 KB
FCC Agent Authorization LetterCover Letter(s)2023-04-21PDF 58.3 KB
FCC Long-term Confidential RequestCover Letter(s)2023-04-21PDF 81 KB
RF ExposureRF Exposure Info2023-04-21PDF 121.7 KB
RF ExposureRF Exposure Info2023-04-21PDF 121.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 66.6 KB
Schematics Metadata onlySchematicsPDF 390.4 KB
Circuit Description Metadata onlyOperational DescriptionPDF 374.1 KB

Application Information

Application IDhFDayZCdH2AwqSefoOt3RQ==
Final Action Date2023-04-21
Application PurposeOriginal Equipment
Applicant FRN0030310346
ModelEM400
Frequency Range902.3-927.6 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionIoT Sensor
Responsible PartyZhenlong Tong, Manager, tongzl@ursalink.com , 0592-5023060
Test FirmTanie Ou, CHINA CERTIFICATION ICT CO., LTD (DONGGUAN), qa@ccttt.com.cn , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
hFDayZCdH2AwqSefoOt3RQ==2023-04-21Original Equipment
6L+0GK/h2jAWtGzgtIlejA==2023-04-21Original Equipment

Equipment Authorization

FrequencyOutputRules
902.3-927.6 MHz0.117000015C
903-926.9 MHz0.065000015C

Grants

TCB Grant - Application hFDayZCdH2AwqSefoOt3RQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 04/21/2023

Application Dated: 04/21/2023
Xiamen Milesight IoT Co., Ltd.
Building C09, Software Park Phase III,
Xiamen 361024,Fujian,,
China
 
Attention: Zhenlong Tong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYHY-EM400
Name of Grantee:  Xiamen Milesight IoT Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IoT Sensor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  927.6 0.117  

Power output listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application hFDayZCdH2AwqSefoOt3RQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiamen Milesight IoT Co., Ltd.
Building C09, Software Park Phase III,
Xiamen 361024,Fujian,,
China
  Date of Grant: 04/21/2023

Application Dated: 04/21/2023
 
Attention: Zhenlong Tong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYHY-EM400
Name of Grantee:  Xiamen Milesight IoT Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IoT Sensor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  927.6 0.117  

Power output listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 6L+0GK/h2jAWtGzgtIlejA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 04/21/2023

Application Dated: 04/21/2023
Xiamen Milesight IoT Co., Ltd.
Building C09, Software Park Phase III,
Xiamen 361024,Fujian,,
China
 
Attention: Zhenlong Tong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYHY-EM400
Name of Grantee:  Xiamen Milesight IoT Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IoT Sensor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.0  -  926.9 0.065  

Power output listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 6L+0GK/h2jAWtGzgtIlejA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiamen Milesight IoT Co., Ltd.
Building C09, Software Park Phase III,
Xiamen 361024,Fujian,,
China
  Date of Grant: 04/21/2023

Application Dated: 04/21/2023
 
Attention: Zhenlong Tong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYHY-EM400
Name of Grantee:  Xiamen Milesight IoT Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IoT Sensor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.0  -  926.9 0.065  

Power output listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: