FCC ID 2AYHY-UC300KS

IoT Controller

by Xiamen Milesight IoT Co., Ltd.

Grantee Code: 2AYHY   Product Code: UC300KS
Latest application date: 2022-07-06

FCC ID Device Details

FCC ID2AYHY-UC300KS
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AYHY
Product CodeUC300KS
Applicant BusinessXiamen Milesight IoT Co., Ltd. 🇨🇳
Related Domains ursalink.com
Equipment ClassIoT Controller
Test FirmShenzhen Anbotek Compliance Laboratory Limited

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.3-927.8 MHzOriginal Equipment2022-07-06
903-927.5 MHzOriginal Equipment2022-07-06

Exhibits

DocumentTypeAvailableFile
UserManualUsers Manual2022-07-06PDF 1.5 MB
Internal PhotosInternal Photos2022-07-06PDF 1 MB
External PhotosExternal Photos2022-07-06PDF 912.2 KB
Label & label locationID Label/Location Info2022-07-06PDF 160.6 KB
Test Setup PhotosTest Setup Photos2022-07-06PDF 558.7 KB
Test ReportTest Report2022-07-06PDF 4.7 MB
Test ReportTest Report2022-07-06PDF 3.8 MB
Declaration Letter of Model DifferenceCover Letter(s)2022-07-06PDF 62.9 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2022-07-06PDF 62.7 KB
Letter of Authorization Rev 1.0Cover Letter(s)2022-07-06PDF 63.1 KB
MPERF Exposure Info2022-07-06PDF 139.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 174.5 KB
SCH Metadata onlySchematicsPDF 449.6 KB
OP Metadata onlyOperational DescriptionPDF 120.2 KB

Application Information

Application IDvUdAS2GTDbYUSE7iOuNAgA==
Final Action Date2022-07-06
Application PurposeOriginal Equipment
Applicant FRN0030310346
ModelUC300KS
Frequency Range902.3-927.8 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionIoT Controller
Responsible PartyZhenlong Tong, Manager, tongzl@ursalink.com , 0592-5023060
Technical ContactXiamen Milesight IoT Co., Ltd., tongzl@ursalink.com
Test FirmJeff Zhu, Shenzhen Anbotek Compliance Laboratory Limited, jeff.zhu@anbotek.com , 86-755-26064492
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
vUdAS2GTDbYUSE7iOuNAgA==2022-07-06Original Equipment
0xxnGiuY3XYgjakHLgyhaQ==2022-07-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.3-927.8 MHz0.124600015CCC
903-927.5 MHz0.123100015CCC

Grants

TCB Grant - Application vUdAS2GTDbYUSE7iOuNAgA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/06/2022

Application Dated: 07/06/2022
Xiamen Milesight IoT Co., Ltd.
Building C09, Software Park Phase III,
Xiamen 361024,Fujian,,
China
 
Attention: Zhenlong Tong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYHY-UC300KS
Name of Grantee:  Xiamen Milesight IoT Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IoT Controller
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  927.8 0.1246  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application vUdAS2GTDbYUSE7iOuNAgA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiamen Milesight IoT Co., Ltd.
Building C09, Software Park Phase III,
Xiamen 361024,Fujian,,
China
  Date of Grant: 07/06/2022

Application Dated: 07/06/2022
 
Attention: Zhenlong Tong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYHY-UC300KS
Name of Grantee:  Xiamen Milesight IoT Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IoT Controller
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  927.8 0.1246  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0xxnGiuY3XYgjakHLgyhaQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/06/2022

Application Dated: 07/06/2022
Xiamen Milesight IoT Co., Ltd.
Building C09, Software Park Phase III,
Xiamen 361024,Fujian,,
China
 
Attention: Zhenlong Tong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYHY-UC300KS
Name of Grantee:  Xiamen Milesight IoT Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IoT Controller
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.0  -  927.5 0.1231  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 0xxnGiuY3XYgjakHLgyhaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xiamen Milesight IoT Co., Ltd.
Building C09, Software Park Phase III,
Xiamen 361024,Fujian,,
China
  Date of Grant: 07/06/2022

Application Dated: 07/06/2022
 
Attention: Zhenlong Tong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYHY-UC300KS
Name of Grantee:  Xiamen Milesight IoT Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IoT Controller
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.0  -  927.5 0.1231  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: