FCC ID 2AYPE-GWTN156-TLK

laptop

by E&S; International Enterprises, Inc.

Grantee Code: 2AYPE   Product Code: GWTN156TLK
Latest application date: 2021-04-02

FCC ID Device Details

FCC ID2AYPE-GWTN156-TLK
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AYPE
Product CodeGWTN156TLK
Applicant BusinessE&S; International Enterprises, Inc. 🇺🇸
Related Domains esichina.com.cn
Equipment Classlaptop
Test FirmShenzhen BALUN Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2021-04-02
2402-2480 MHzOriginal Equipment2021-04-02
2402-2480 MHzOriginal Equipment2021-04-02

Exhibits

DocumentTypeAvailableFile
User_ManualUsers Manual2021-09-03PDF 1,014.5 KB
INT_PHOTOInternal Photos2021-09-03PDF 4.3 MB
Internal_PhotosInternal Photos2021-09-03PDF 4.3 MB
Internal_photosInternal Photos2021-09-03PDF 4.3 MB
External_PhotosExternal Photos2021-09-03PDF 1.8 MB
External_photosExternal Photos2021-09-03PDF 1.8 MB
Label_and_Label_LocationID Label/Location Info2021-04-02PDF 123.8 KB
Test Setup PhotosTest Setup Photos2021-09-03PDF 952.6 KB
Test_Setup_PhotosTest Setup Photos2021-09-03PDF 110.3 KB
Test_Setup_photosTest Setup Photos2021-09-03PDF 110.3 KB
Test_Setup_photosTest Setup Photos2021-09-03PDF 952.6 KB
BL-SZ2130117-601 FCC DSS test report_BT3.0Test Report2021-04-02PDF 5 MB
BL-SZ2130117-602 FCC DTS test report_BLETest Report2021-04-02PDF 4 MB
BL-SZ2130117-603 DTS test report_WLANTest Report2021-04-02PDF 2.4 MB
BL-SZ2130117-604 Data Part 1Test Report2021-04-02PDF 2.1 MB
BL-SZ2130117-604 Data Part 2Test Report2021-04-02PDF 1.6 MB
BL-SZ2130117-604 Data Part 3Test Report2021-04-02PDF 2.3 MB
BL-SZ2130117-604 NII test reportTest Report2021-04-02PDF 3.9 MB
BL-SZ2130117-701 FCC SAR test reportRF Exposure Info2021-04-02PDF 1.8 MB
Agent Authorization Rev 1.0Cover Letter(s)2021-04-02PDF 20 KB
Agent_AuthorizationCover Letter(s)2021-04-02PDF 20 KB
Authorization LetterCover Letter(s)2021-04-02PDF 291.3 KB
Declaration of identityCover Letter(s)2021-04-02PDF 397.3 KB
FCC Software Configuration Control DeclarationCover Letter(s)2021-04-02PDF 127.6 KB
FCC_Long_Term_Confidentiality_Request_Rev4.1Cover Letter(s)2021-04-02PDF 128 KB
FCC_Long_Term_Only_Confidentiality_RequestCover Letter(s)2021-04-02PDF 128 KB
CALIBRATION REPORTRF Exposure Info2021-04-02PDF 3.5 MB
DASY Dipole Measurement ReportRF Exposure Info2021-04-02PDF 744 KB
Block_Diagram Metadata onlyBlock DiagramPDF 64.4 KB
block_diagram Metadata onlyBlock DiagramPDF 64.4 KB
SCH Metadata onlySchematicsPDF 771.1 KB
Schematic Metadata onlySchematicsPDF 771.1 KB
Schematics Metadata onlySchematicsPDF 771.1 KB
Operation-Description Metadata onlyOperational DescriptionPDF 139.9 KB
software security DescriptionforUNIIDevices Metadata onlySDR Software/Security InfPDF 102.5 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 161.4 KB

Application Information

Application IDsm5heCsQwkqBaeBUNWq9BQ==
Final Action Date2021-04-02
Application PurposeOriginal Equipment
Applicant FRN0030411623
ModelGWTN156-TLK
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Descriptionlaptop
Responsible PartyTing Liu, apple.liuting@esichina.com.cn , +1 818 887 0700
Technical ContactE&S; International Enterprises, Inc., apple.liuting@esichina.com.cn
Test FirmHanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com , 86-755-66833830
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/03/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory use conditions is 0.39W/kg.

Applications

Application IDDatePurpose
sm5heCsQwkqBaeBUNWq9BQ==2021-04-02Original Equipment
atSp2zMcGo/7Cz2WNWgtCA==2021-04-02Original Equipment
JZHV9SBBQ4yfw+qXw7yRLQ==2021-04-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0102115CCC
2402-2480 MHz0.016260015CCC
2412-2462 MHz0.176215CCC
5180-5240 MHz0.026315E38, CC
5745-5825 MHz0.0264215E38, CC

Grants

TCB Grant - Application sm5heCsQwkqBaeBUNWq9BQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/02/2021

Application Dated: 04/02/2021
E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-GWTN156-TLK
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: laptop
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0263  
38 CC 15E 5745.0  -  5825.0 0.02642  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory use conditions is 0.39W/kg.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application sm5heCsQwkqBaeBUNWq9BQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
United States
  Date of Grant: 04/02/2021

Application Dated: 04/02/2021
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-GWTN156-TLK
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: laptop
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0263  
38 CC 15E 5745.0  -  5825.0 0.02642  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory use conditions is 0.39W/kg.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JZHV9SBBQ4yfw+qXw7yRLQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/02/2021

Application Dated: 04/02/2021
E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-GWTN156-TLK
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: laptop
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01626  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory use conditions is 0.58W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application JZHV9SBBQ4yfw+qXw7yRLQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
United States
  Date of Grant: 04/02/2021

Application Dated: 04/02/2021
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-GWTN156-TLK
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: laptop
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01626  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory use conditions is 0.58W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application atSp2zMcGo/7Cz2WNWgtCA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/02/2021

Application Dated: 04/02/2021
E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-GWTN156-TLK
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Digital Transmission System
Notes: laptop
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01021  
CC 15C 2412.0  -  2462.0 0.1762  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory use conditions is 0.90W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application atSp2zMcGo/7Cz2WNWgtCA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
United States
  Date of Grant: 04/02/2021

Application Dated: 04/02/2021
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-GWTN156-TLK
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Digital Transmission System
Notes: laptop
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01021  
CC 15C 2412.0  -  2462.0 0.1762  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory use conditions is 0.90W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: