FCC ID 2AYPE-VWNC71419

LAPTOP

by E&S; International Enterprises, Inc.

Grantee Code: 2AYPE   Product Code: VWNC71419
Latest application date: 2022-01-27

FCC ID Device Details

FCC ID2AYPE-VWNC71419
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AYPE
Product CodeVWNC71419
Applicant BusinessE&S; International Enterprises, Inc. 🇺🇸
Related Domains esichina.com.cn baluntek.com
Equipment ClassLAPTOP
Test FirmShenzhen BALUN Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2022-01-27
5745-5825 MHzOriginal Equipment2022-01-27
2402-2480 MHzOriginal Equipment2022-01-27

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2022-07-27PDF 3.7 MB
Internal PhotosInternal Photos2022-07-27PDF 3.8 MB
External PhotosExternal Photos2022-07-27PDF 1.5 MB
ID Label/Location InfoID Label/Location Info2022-01-27PDF 97.2 KB
Test Setup PhotosTest Setup Photos2022-07-27PDF 1 MB
Test Setup Photos_SARTest Setup Photos2022-07-27PDF 116.2 KB
Test Report_BLETest Report2022-01-27PDF 5.4 MB
Test Report_DFSTest Report2022-01-27PDF 1.1 MB
Test Report_DSSTest Report2022-01-27PDF 1.9 MB
Test Report_Data Part 1_1Test Report2022-01-27PDF 5.4 MB
Test Report_Data Part 1_2Test Report2022-01-27PDF 3.3 MB
Test Report_Data Part 2Test Report2022-01-27PDF 2.2 MB
Test Report_Data Part 3_1Test Report2022-01-27PDF 5.5 MB
Test Report_Data Part 3_2Test Report2022-01-27PDF 4.9 MB
Test Report_NIITest Report2022-01-27PDF 4.8 MB
Test Report_SARRF Exposure Info2022-01-27PDF 2.6 MB
Test Report_WLAN-1Test Report2022-01-27PDF 5.5 MB
Test Report_WLAN-2Test Report2022-01-27PDF 4.2 MB
Authorization LetterCover Letter(s)2022-01-27PDF 81.2 KB
ConfidentialityCover Letter(s)2022-01-27PDF 59.8 KB
Declaration of identityCover Letter(s)2022-01-27PDF 175.5 KB
CALIBRATION REPORTRF Exposure Info2022-01-27PDF 1.9 MB
DASY Dipole Measurement ReportRF Exposure Info2022-01-27PDF 743.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 87.2 KB
Schematics Metadata onlySchematicsPDF 1.4 MB
Operational Description Metadata onlyOperational DescriptionPDF 63.2 KB
Software Security Cover Letter Metadata onlyOperational DescriptionPDF 104.4 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 66.5 KB
Tune-Up Procedure Metadata onlyParts List/Tune Up InfoPDF 385.2 KB

Application Information

Application IDrqUjNJbmQ6dVdU8YrlIXCw==
Final Action Date2022-01-27
Application PurposeOriginal Equipment
Applicant FRN0030411623
ModelVWNC71419
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionLAPTOP
Responsible PartyTing Liu, apple.liuting@esichina.com.cn , +1 818 887 0700
AgentWu Wu Wu, Shenzhen BALUN Technology Co., Ltd., xuewen.wu@baluntek.com , +8675566833404
Technical Contactxuewen wu, Shenzhen BALUN Technology Co., Ltd., xuewen.wu@baluntek.com , +8675566833404
Non-Technical ContactTiffany Tiffany, Shenzhen BALUN Technology Co., Ltd., xuewen.wu@baluntek.com , 86-755-66850100
Test FirmHanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com , 86-755-66833830
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/27/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This equipment should be installed and operated with minimum distance 0 mm between radiator and human body. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.973 W/kg and 1.251 W/kg, respectively This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
rqUjNJbmQ6dVdU8YrlIXCw==2022-01-27Original Equipment
A62J0M+rcFUJETAOVozPmQ==2022-01-27Original Equipment
5VAYPfhF/fXxz3C5qhFdwA==2022-01-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.009200015CCC
2402-2480 MHz0.007515CCC
2412-2462 MHz0.8515CCC, MO
5180-5240 MHz0.0515ECC, MO
5260-5320 MHz0.0515ECC, MO, ND
5500-5700 MHz0.0515ECC, MO, ND
5745-5825 MHz0.05115ECC, MO

Grants

TCB Grant - Application rqUjNJbmQ6dVdU8YrlIXCw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/27/2022

Application Dated: 01/27/2022
E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-VWNC71419
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Digital Transmission System
Notes: LAPTOP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  
CC MO 15C 2412.0  -  2462.0 0.85  

Power Output is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This equipment should be installed and operated with minimum distance 0 mm between radiator and human body. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.973 W/kg and 1.251 W/kg, respectively This device has 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application rqUjNJbmQ6dVdU8YrlIXCw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
United States
  Date of Grant: 01/27/2022

Application Dated: 01/27/2022
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-VWNC71419
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Digital Transmission System
Notes: LAPTOP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  
CC MO 15C 2412.0  -  2462.0 0.85  

Power Output is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This equipment should be installed and operated with minimum distance 0 mm between radiator and human body. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.973 W/kg and 1.251 W/kg, respectively This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application A62J0M+rcFUJETAOVozPmQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/27/2022

Application Dated: 01/27/2022
E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-VWNC71419
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LAPTOP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  
CC MO ND 15E 5260.0  -  5320.0 0.05  
CC MO ND 15E 5500.0  -  5700.0 0.05  
CC MO 15E 5745.0  -  5825.0 0.051  

Power Output is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This equipment should be installed and operated with minimum distance 0 mm between radiator and human body. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 1.106 W/kg and 1.500 W/kg, respectively This device has 20/40/80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application A62J0M+rcFUJETAOVozPmQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
United States
  Date of Grant: 01/27/2022

Application Dated: 01/27/2022
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-VWNC71419
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LAPTOP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  
CC MO ND 15E 5260.0  -  5320.0 0.05  
CC MO ND 15E 5500.0  -  5700.0 0.05  
CC MO 15E 5745.0  -  5825.0 0.051  

Power Output is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This equipment should be installed and operated with minimum distance 0 mm between radiator and human body. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 1.106 W/kg and 1.500 W/kg, respectively This device has 20/40/80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 5VAYPfhF/fXxz3C5qhFdwA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/27/2022

Application Dated: 01/27/2022
E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-VWNC71419
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LAPTOP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0092  

Power Output is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This equipment should be installed and operated with minimum distance 0 mm between radiator and human body. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.818 W/kg and 0.963 W/kg, respectively

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 5VAYPfhF/fXxz3C5qhFdwA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

E&S International Enterprises, Inc.
7801 Hayvenhurst Avenue
Van Nuys, CA 91406
United States
  Date of Grant: 01/27/2022

Application Dated: 01/27/2022
 
Attention: Ting Liu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPE-VWNC71419
Name of Grantee:  E&S International Enterprises, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LAPTOP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0092  

Power Output is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This equipment should be installed and operated with minimum distance 0 mm between radiator and human body. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.818 W/kg and 0.963 W/kg, respectively


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: