FCC ID 2AYPMA30

projector

by Shenzhen Light Valve Technology Co., Ltd.

Grantee Code: 2AYPM   Product Code: A30
Latest application date: 2021-07-26

FCC ID Device Details

FCC ID2AYPMA30
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AYPM
Product CodeA30
Applicant BusinessShenzhen Light Valve Technology Co., Ltd. 🇨🇳
Equipment Classprojector
Test FirmShenzhen LCS Compliance Testing Laboratory Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-07-26
5180-5240 MHzOriginal Equipment2021-07-26
2402-2480 MHzOriginal Equipment2021-07-26

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-07-26PDF 348.5 KB
Internal PhotosInternal Photos2021-07-26PDF 890.2 KB
Internal photoInternal Photos2021-07-26PDF 890.2 KB
internal photoInternal Photos2021-07-26PDF 890.2 KB
External PhotosExternal Photos2021-07-26PDF 341.6 KB
external photoExternal Photos2021-07-26PDF 341.6 KB
LabelID Label/Location Info2021-07-26PDF 46.6 KB
Test Setup PhotosTest Setup Photos2021-07-26PDF 261.9 KB
Test setup photoTest Setup Photos2021-07-26PDF 261.9 KB
Appendix A Test Data for BT _FCC ID TemplatTest Report2021-07-26PDF 3 MB
Appendix B Test Data for BT LE _FCC ID TemplatTest Report2021-07-26PDF 837.5 KB
Appendix C Test Data for 2.4G WIFI _FCC ID TemplatTest Report2021-07-26PDF 2.8 MB
Appendix D Test Data for 5.2G WIFI _FCC ID TemplatTest Report2021-07-26PDF 2 MB
Appendix E Test Data for 5.8G WIFI _FCC ID TemplatTest Report2021-07-26PDF 2.1 MB
Test ReporTest Report2021-07-26PDF 466 KB
Test ReportTest Report2021-07-26PDF 440.2 KB
Test ReportTest Report2021-07-26PDF 505.2 KB
Test ReportTest Report2021-07-26PDF 369.8 KB
Agent Authorization Rev 1.0Cover Letter(s)2021-07-26PDF 15.2 KB
Declaration Letter of Model DifferenceCover Letter(s)2021-07-26PDF 46.5 KB
FCC Short & Long Term Confidentiality Request Rev4Cover Letter(s)2021-07-26PDF 19.5 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2021-07-26PDF 19.5 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2021-07-26PDF 16.9 KB
WIFI Channel 12 and 13 Declaration LetterCover Letter(s)2021-07-26PDF 58.9 KB
RF EXPOSURERF Exposure Info2021-07-26PDF 171.3 KB
RF exposureRF Exposure Info2021-07-26PDF 171.3 KB
RFExposureRF Exposure Info2021-07-26PDF 171.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 52.4 KB
Block diagram Metadata onlyBlock DiagramPDF 52.4 KB
SCH Metadata onlySchematicsPDF 486.9 KB
OP Metadata onlyOperational DescriptionPDF 77.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 77.1 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security InfPDF 87.6 KB

Application Information

Application IDftmqqDY8XWIQnaHXEwMl5A==
Final Action Date2021-07-26
Application PurposeOriginal Equipment
Applicant FRN0030412290
ModelA30
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device Descriptionprojector
Responsible PartyAndy Hu, general manager, hujunpj@163.com , 0755-29691096
Technical ContactShenzhen Light Valve Technology Co., Ltd., hujunpj@163.com
Test FirmGavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com , 0755-82591330
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ftmqqDY8XWIQnaHXEwMl5A==2021-07-26Original Equipment
XWlzevxfT4Bx/PCuzan17A==2021-07-26Original Equipment
KMS5l50D7PWMos7xSxtTRA==2021-07-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002915CCC
2402-2480 MHz0.003000015CCC
2412-2462 MHz0.052415CCC
5180-5240 MHz0.027315E38, CC
5745-5825 MHz0.038515E38, CC

Grants

TCB Grant - Application XWlzevxfT4Bx/PCuzan17A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/26/2021

Application Dated: 07/26/2021
Shenzhen Light Valve Technology Co., Ltd.
Room 301, building 14, Junfeng Industrial Park,
Chongqing Road,heping communityFuhai,Fuhai Street,
Bao 'an district, Shenzhen, 518000
China
 
Attention: Andy Hu , general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPMA30
Name of Grantee:  Shenzhen Light Valve Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0273  
38 CC 15E 5745.0  -  5825.0 0.0385  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application XWlzevxfT4Bx/PCuzan17A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Light Valve Technology Co., Ltd.
Room 301, building 14, Junfeng Industrial Park, Chongqing Road,heping communityFuhai,Fuhai Street,
Bao 'an district, Shenzhen, 518000
China
  Date of Grant: 07/26/2021

Application Dated: 07/26/2021
 
Attention: Andy Hu , general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPMA30
Name of Grantee:  Shenzhen Light Valve Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0273  
38 CC 15E 5745.0  -  5825.0 0.0385  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application KMS5l50D7PWMos7xSxtTRA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/26/2021

Application Dated: 07/26/2021
Shenzhen Light Valve Technology Co., Ltd.
Room 301, building 14, Junfeng Industrial Park,
Chongqing Road,heping communityFuhai,Fuhai Street,
Bao 'an district, Shenzhen, 518000
China
 
Attention: Andy Hu , general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPMA30
Name of Grantee:  Shenzhen Light Valve Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application KMS5l50D7PWMos7xSxtTRA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Light Valve Technology Co., Ltd.
Room 301, building 14, Junfeng Industrial Park, Chongqing Road,heping communityFuhai,Fuhai Street,
Bao 'an district, Shenzhen, 518000
China
  Date of Grant: 07/26/2021

Application Dated: 07/26/2021
 
Attention: Andy Hu , general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPMA30
Name of Grantee:  Shenzhen Light Valve Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ftmqqDY8XWIQnaHXEwMl5A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/26/2021

Application Dated: 07/26/2021
Shenzhen Light Valve Technology Co., Ltd.
Room 301, building 14, Junfeng Industrial Park,
Chongqing Road,heping communityFuhai,Fuhai Street,
Bao 'an district, Shenzhen, 518000
China
 
Attention: Andy Hu , general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPMA30
Name of Grantee:  Shenzhen Light Valve Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  
CC 15C 2412.0  -  2462.0 0.0524  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ftmqqDY8XWIQnaHXEwMl5A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Light Valve Technology Co., Ltd.
Room 301, building 14, Junfeng Industrial Park, Chongqing Road,heping communityFuhai,Fuhai Street,
Bao 'an district, Shenzhen, 518000
China
  Date of Grant: 07/26/2021

Application Dated: 07/26/2021
 
Attention: Andy Hu , general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYPMA30
Name of Grantee:  Shenzhen Light Valve Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  
CC 15C 2412.0  -  2462.0 0.0524  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: