FCC ID 2AYRA-08438

Linksys Velop Pro 7

by Linksys USA, Inc.

Grantee Code: 2AYRA   Product Code: 08438
Latest application date: 2023-07-03

FCC ID Device Details

FCC ID2AYRA-08438
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AYRA
Product Code08438
Applicant BusinessLinksys USA, Inc. 🇺🇸
Related Domains linksys.com
Equipment ClassLinksys Velop Pro 7
Test FirmSporton International Inc. Hsinchu Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5955-7095 MHzOriginal Equipment2023-07-03
5180-5250 MHzOriginal Equipment2023-07-03
2412-2462 MHzOriginal Equipment2023-07-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-12-30PDF 2.5 MB
Internal PhotosInternal Photos2023-12-30PDF 4.2 MB
External PhotosExternal Photos2023-12-30PDF 1.1 MB
Label and LocationID Label/Location Info2023-07-03PDF 193.4 KB
Antenna Photos 2.4GTest Setup Photos2023-12-30PDF 122 KB
Antenna Photos 5GTest Setup Photos2023-12-30PDF 122 KB
Antenna Photos 6GTest Setup Photos2023-12-30PDF 125.7 KB
Antenna Photos BT ZigbeeTest Setup Photos2023-12-30PDF 104.9 KB
Test Setup Photos 2.4GTest Setup Photos2023-12-30PDF 403.4 KB
Test Setup Photos 5GTest Setup Photos2023-12-30PDF 405.6 KB
Test Setup Photos 6GTest Setup Photos2023-12-30PDF 401.1 KB
Test Setup Photos BT LETest Setup Photos2023-12-30PDF 401.5 KB
Test Setup Photos DFSTest Setup Photos2023-12-30PDF 227.6 KB
Test Setup Photos ZigbeeTest Setup Photos2023-12-30PDF 403.9 KB
Antenna Report 2.4GTest Report2023-07-03PDF 326.7 KB
Antenna Report 5GTest Report2023-07-03PDF 326.7 KB
Antenna Report 6GTest Report2023-07-03PDF 242.8 KB
Antenna Report BT ZigbeeTest Report2023-07-03PDF 454.5 KB
Test Report 2.4GTest Report2023-07-03PDF 2.8 MB
Test Report 5G Part 1Test Report2023-07-03PDF 4.8 MB
Test Report 5G Part 2Test Report2023-07-03PDF 1.9 MB
Test Report 6G Part 1Test Report2023-07-03PDF 5.3 MB
Test Report 6G Part 2Test Report2023-07-03PDF 4.6 MB
Test Report BT LETest Report2023-07-03PDF 1.5 MB
Test Report DFSTest Report2023-07-03PDF 2.5 MB
Test Report ZigbeeTest Report2023-07-03PDF 1.1 MB
Attestation Statement 2.911(d)(7)Attestation Statements2023-07-03PDF 177.9 KB
Attestation Statements Part 2.911(d)(7)Attestation Statements2023-07-03PDF 177.9 KB
Attstn Stmt part 2.911(d)(5)(i)&(ii)Attestation Statements2023-07-03PDF 203.3 KB
Indoor Access Point OperationAttestation Statements2023-07-03PDF 204.6 KB
Confidentiality Request LetterCover Letter(s)2023-07-03PDF 218.7 KB
POACover Letter(s)2023-07-03PDF 176.4 KB
TPC Declaration LetterCover Letter(s)2023-07-03PDF 201.6 KB
MPE ReportRF Exposure Info2023-07-03PDF 403.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 351.3 KB
Schematics Metadata onlySchematicsPDF 1.7 MB
Operational Description Metadata onlyOperational DescriptionPDF 147.6 KB
Op Desc Software Security Metadata onlySDR Software/Security InfPDF 126.7 KB

Application Information

Application IDrxpCegiwR/srcnrKxBqhtw==
Final Action Date2023-07-03
Application PurposeOriginal Equipment
Applicant FRN0030450555
Model08438
Frequency Range5955-7095 MHz
Equipment Class6ID - 15E 6 GHz Low Power Indoor Access Point
Device DescriptionLinksys Velop Pro 7
Responsible PartyJulia Chu, julia.chu@linksys.com , 886-921-465-808
Test FirmAlex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw , +886-3-327-3456
TCB Emailcb@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/30/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 48 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, 160 and 320 MHz bandwidth modes. Device is intended for indoor use only.

Applications

Application IDDatePurpose
rxpCegiwR/srcnrKxBqhtw==2023-07-03Original Equipment
X2TwkLao9v1HRhdjX8VRIg==2023-07-03Original Equipment
CTa2RsqSfTrLbmC3H99ong==2023-07-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00915CCC
2405-2480 MHz0.00915CCC
2412-2462 MHz0.74615CCC, MO
5180-5250 MHz0.84115ECC, MO
5250-5320 MHz0.23515ECC, MO, ND
5500-5720 MHz0.24915ECC, MO, ND
5745-5825 MHz0.99815ECC, MO
5955-7095 MHz0.834000015ECC, EP, MO

Grants

TCB Grant - Application X2TwkLao9v1HRhdjX8VRIg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/03/2023

Application Dated: 06/15/2023
Linksys USA, Inc.
121 Theory
Irvine, CA 92617
 
Attention: Julia Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYRA-08438
Name of Grantee:  Linksys USA, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Linksys Velop Pro 7
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5250.0 0.841  
CC MO ND 15E 5250.0  -  5320.0 0.235  
CC MO ND 15E 5500.0  -  5720.0 0.249  
CC MO 15E 5745.0  -  5825.0 0.998  

Output Power listed is the maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 48 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application X2TwkLao9v1HRhdjX8VRIg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Linksys USA, Inc.
121 Theory
Irvine, CA 92617
United States
  Date of Grant: 07/03/2023

Application Dated: 06/15/2023
 
Attention: Julia Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYRA-08438
Name of Grantee:  Linksys USA, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Linksys Velop Pro 7
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5250.0 0.841  
CC MO ND 15E 5250.0  -  5320.0 0.235  
CC MO ND 15E 5500.0  -  5720.0 0.249  
CC MO 15E 5745.0  -  5825.0 0.998  

Output Power listed is the maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 48 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application rxpCegiwR/srcnrKxBqhtw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/03/2023

Application Dated: 06/15/2023
Linksys USA, Inc.
121 Theory
Irvine, CA 92617
 
Attention: Julia Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYRA-08438
Name of Grantee:  Linksys USA, Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Linksys Velop Pro 7
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.834  

Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 48 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, 160 and 320 MHz bandwidth modes. Device is intended for indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application rxpCegiwR/srcnrKxBqhtw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Linksys USA, Inc.
121 Theory
Irvine, CA 92617
United States
  Date of Grant: 07/03/2023

Application Dated: 06/15/2023
 
Attention: Julia Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYRA-08438
Name of Grantee:  Linksys USA, Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Linksys Velop Pro 7
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.834  

Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 48 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, 160 and 320 MHz bandwidth modes. Device is intended for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application CTa2RsqSfTrLbmC3H99ong==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/03/2023

Application Dated: 06/15/2023
Linksys USA, Inc.
121 Theory
Irvine, CA 92617
 
Attention: Julia Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYRA-08438
Name of Grantee:  Linksys USA, Inc.
Equipment Class: Digital Transmission System
Notes: Linksys Velop Pro 7
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.746  
CC 15C 2402.0  -  2480.0 0.009  
CC 15C 2405.0  -  2480.0 0.009  

Output Power listed is the maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 48 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. Device is intended for indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application CTa2RsqSfTrLbmC3H99ong==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Linksys USA, Inc.
121 Theory
Irvine, CA 92617
United States
  Date of Grant: 07/03/2023

Application Dated: 06/15/2023
 
Attention: Julia Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYRA-08438
Name of Grantee:  Linksys USA, Inc.
Equipment Class: Digital Transmission System
Notes: Linksys Velop Pro 7
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.746  
CC 15C 2402.0  -  2480.0 0.009  
CC 15C 2405.0  -  2480.0 0.009  

Output Power listed is the maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 48 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. Device is intended for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: