FCC ID 2AYT7-9260

WiFi/BT Module

by Nextfour Solutions Oy

Grantee Code: 2AYT7   Product Code: 9260
Latest application date: 2025-04-02

FCC ID Device Details

FCC ID2AYT7-9260
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AYT7
Product Code9260
Applicant BusinessNextfour Solutions Oy 🇫🇮
Related Domains nextfour.com
Equipment ClassWiFi/BT Module
Test FirmF2 Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-04-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-04-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-09-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-09-14
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/20172021-09-09
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/20172021-09-09
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/20172021-09-09

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2025-04-02PDF 777.2 KB
Users ManualUsers Manual2021-09-14PDF 1.9 MB
Internal PhotosInternal Photos2025-04-02PDF 363.3 KB
Internal PhotosInternal Photos2021-09-14PDF 721.5 KB
External PhotosExternal Photos2025-04-02PDF 436.4 KB
External PhotosExternal Photos2021-09-14PDF 381.3 KB
External PhotosExternal Photos2021-09-09PDF 762.1 KB
ID LabelID Label/Location Info2021-09-14PDF 611.9 KB
ID LabelID Label/Location Info2021-09-09PDF 112.7 KB
Test Setup PhotosTest Setup Photos2025-04-02PDF 1.1 MB
Antenna InfoTest Report2025-04-02PDF 2.9 MB
Test Report 1Test Report2025-04-02PDF 2.4 MB
Test ReportTest Report2021-09-14PDF 1.5 MB
Covered List AttestationAttestation Statements2025-04-02PDF 252.9 KB
US Agent for service of process attestationAttestation Statements2025-04-02PDF 134.7 KB
Antenna AttestationCover Letter(s)2021-09-14PDF 606.4 KB
Authorization LetterCover Letter(s)2025-04-02PDF 97.8 KB
Authorization LetterCover Letter(s)2025-04-02PDF 101.7 KB
Confidentiality RequestCover Letter(s)2025-04-02PDF 107.1 KB
Cover LetterCover Letter(s)2025-04-02PDF 108.1 KB
Cover LetterCover Letter(s)2025-04-02PDF 115.7 KB
PCII LetterCover Letter(s)2025-04-02PDF 88.5 KB
Authorization LetterCover Letter(s)2021-09-14PDF 102.5 KB
Confidentiality RequestCover Letter(s)2021-09-14PDF 110.5 KB
Cover LetterCover Letter(s)2021-09-14PDF 109.9 KB
PCII LetterCover Letter(s)2021-09-14PDF 88.2 KB
ML LetterCover Letter(s)2021-09-09PDF 126.3 KB
RF Exposure InfoRF Exposure Info2025-04-02PDF 216.5 KB
RF Exposure InfoRF Exposure Info2021-09-14PDF 311.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.4 MB

Application Information

Application IDMHsD5p7sA5VhJffT5e21Gw==
Final Action Date2025-04-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0030496939
Model9260
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWiFi/BT Module
Responsible PartyNiklas Ohman, CEO, niklas.ohman@nextfour.com , +358503728287
AgentMichelle Michelle Michelle, CKC Certification Services, LLC, tcbinfo@ckc.com , 209-299-5240
Test FirmWendy Fuster, F2 Labs, wfuster@f2labs.com , 301-253-4500
TCB Emailtcbadmin@ckc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant Comments"C2PC to add antenna. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product Approved for host-specific mobile RF exposure conditions and collocation configuration as listed in this filing. Approved for use with antenna(s) and specific operational configurations as listed in this filing."

Applications

Application IDDatePurpose
MHsD5p7sA5VhJffT5e21Gw==2025-04-02Class II permissive change or modification of presently authorized equipment
9WdErw9JfTySXt+IPKO+Ew==2025-04-02Class II permissive change or modification of presently authorized equipment
PiErkZAV7D3ntJt29lbiOQ==2021-09-14Class II permissive change or modification of presently authorized equipment
IsWwJdB+igCE+kpxMcGacw==2021-09-14Class II permissive change or modification of presently authorized equipment
Jp5Gjs6hNB2aDQiBPbTDLA==2021-09-09Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017
At1AyiraQpK5kII8MyaAcg==2021-09-09Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017
4s2pccBe5kGKZJachbL50Q==2021-09-09Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017
0q9ZAsNLLmIFzmYzO9iICg==2021-09-09Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0115CCC
2402-2480 MHz0.014000015CCC
2402-2480 MHz0.0140000CC
2402-2480 MHz0.01CC
2412-2472 MHz0.98415CCC, MO
2412-2472 MHz0.984CC, MO
2422-2462 MHz0.4315CCC, MO
2422-2462 MHz0.43CC, MO
5190-5230 MHz0.13415ECC, MO
5210 MHz0.06215ECC, MO, ND
5260-5320 MHz0.22915ECC, MO, ND
5270-5310 MHz0.1115ECC, MO, ND
5290 MHz0.05215ECC, MO, ND
5500-5700 MHz0.19815ECC, MO, ND
5510-5670 MHz0.22115ECC, MO, ND
5530-5690 MHz0.23215ECC, MO, ND
5745-5825 MHz0.29915ECC, MO
5755-5795 MHz0.19815ECC, MO
5775 MHz0.14815ECC, MO

Grants

TCB Grant - Application PiErkZAV7D3ntJt29lbiOQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 09/14/2021

Application Dated: 09/09/2021
Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Digital Transmission System
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.984  
CC MO 15C 2422.0  -  2462.0 0.43  

C2PC for collocation. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product

Approved for host-specific mobile RF exposure conditions and collocation configuration as listed in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application PiErkZAV7D3ntJt29lbiOQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
  Date of Grant: 09/14/2021

Application Dated: 09/09/2021
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Digital Transmission System
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.984  
CC MO 15C 2422.0  -  2462.0 0.43  

C2PC for collocation. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product

Approved for host-specific mobile RF exposure conditions and collocation configuration as listed in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application MHsD5p7sA5VhJffT5e21Gw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 04/02/2025

Application Dated: 04/02/2025
Nextfour Solutions Oy
Kaurakatu 48B
Turku, 20740
Finland
 
Attention: Niklas Ohman , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Digital Transmission System
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.984  
CC MO 15C 2422.0  -  2462.0 0.43  

"C2PC to add antenna.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product

Approved for host-specific mobile RF exposure conditions and collocation configuration as listed in this filing. Approved for use with antenna(s) and specific operational configurations as listed in this filing."


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Jp5Gjs6hNB2aDQiBPbTDLA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 09/09/2021

Application Dated: 08/16/2021
Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: WiFi/BT Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application Jp5Gjs6hNB2aDQiBPbTDLA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
  Date of Grant: 09/09/2021

Application Dated: 08/16/2021
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: WiFi/BT Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application IsWwJdB+igCE+kpxMcGacw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 09/14/2021

Application Dated: 09/09/2021
Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

C2PC for collocation.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Approved for host-specific mobile RF exposure conditions and collocation configuration as listed in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IsWwJdB+igCE+kpxMcGacw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
  Date of Grant: 09/14/2021

Application Dated: 09/09/2021
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

C2PC for collocation.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Approved for host-specific mobile RF exposure conditions and collocation configuration as listed in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application At1AyiraQpK5kII8MyaAcg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 09/09/2021

Application Dated: 08/16/2021
Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi/BT Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.191  
CC MO 15E 5190.0  -  5230.0 0.134  
CC MO ND 15E 5210.0  -  5210.0 0.062  
CC MO ND 15E 5260.0  -  5320.0 0.229  
CC MO ND 15E 5270.0  -  5310.0 0.11  
CC MO ND 15E 5290.0  -  5290.0 0.052  
CC MO ND 15E 5500.0  -  5700.0 0.198  
CC MO ND 15E 5510.0  -  5670.0 0.221  
CC MO ND 15E 5530.0  -  5690.0 0.232  
CC MO 15E 5745.0  -  5825.0 0.299  
CC MO 15E 5755.0  -  5795.0 0.198  
CC MO 15E 5775.0  -  5775.0 0.148  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application At1AyiraQpK5kII8MyaAcg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
  Date of Grant: 09/09/2021

Application Dated: 08/16/2021
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi/BT Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.191  
CC MO 15E 5190.0  -  5230.0 0.134  
CC MO ND 15E 5210.0  -  5210.0 0.062  
CC MO ND 15E 5260.0  -  5320.0 0.229  
CC MO ND 15E 5270.0  -  5310.0 0.11  
CC MO ND 15E 5290.0  -  5290.0 0.052  
CC MO ND 15E 5500.0  -  5700.0 0.198  
CC MO ND 15E 5510.0  -  5670.0 0.221  
CC MO ND 15E 5530.0  -  5690.0 0.232  
CC MO 15E 5745.0  -  5825.0 0.299  
CC MO 15E 5755.0  -  5795.0 0.198  
CC MO 15E 5775.0  -  5775.0 0.148  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 9WdErw9JfTySXt+IPKO+Ew==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 04/02/2025

Application Dated: 04/02/2025
Nextfour Solutions Oy
Kaurakatu 48B
Turku, 20740
Finland
 
Attention: Niklas Ohman , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

C2PC to add antenna.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Approved for host-specific mobile RF exposure conditions and collocation configuration as listed in this filing. Approved for use with antenna(s) and specific operational configurations as listed in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4s2pccBe5kGKZJachbL50Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 09/09/2021

Application Dated: 08/16/2021
Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 4s2pccBe5kGKZJachbL50Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
  Date of Grant: 09/09/2021

Application Dated: 08/16/2021
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0q9ZAsNLLmIFzmYzO9iICg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 09/09/2021

Application Dated: 08/16/2021
Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Digital Transmission System
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.984  
CC MO 15C 2422.0  -  2462.0 0.43  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 0q9ZAsNLLmIFzmYzO9iICg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nextfour Solutions Oy
Voimakatu 18
Turku, 20520
Finland
  Date of Grant: 09/09/2021

Application Dated: 08/16/2021
 
Attention: Ville Keskilohko , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYT7-9260
Name of Grantee:  Nextfour Solutions Oy
Equipment Class: Digital Transmission System
Notes: WiFi/BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.984  
CC MO 15C 2422.0  -  2462.0 0.43  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: