FCC ID 2AYVG-E124B

LED bluetooth controller

by Shenzhen Bason Electronics Technology Co., Ltd.

Grantee Code: 2AYVG   Product Code: E124B
Latest application date: 2021-03-27

FCC ID Device Details

FCC ID2AYVG-E124B
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AYVG
Product CodeE124B
Applicant BusinessShenzhen Bason Electronics Technology Co., Ltd. 🇨🇳
Related Domains szbason.com
Equipment ClassLED bluetooth controller
Test FirmShenzhen LCS Compliance Testing Laboratory Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-03-27
2402-2480 MHzOriginal Equipment2021-03-27

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-03-27PDF 1.9 MB
Internal PhotosInternal Photos2021-03-27PDF 543.4 KB
External PhotosExternal Photos2021-03-27PDF 584 KB
Label and Label LocationID Label/Location Info2021-03-27PDF 33.1 KB
Test Setup PhotosTest Setup Photos2021-03-27PDF 221.5 KB
Appendix A Test Data for BLETest Report2021-03-27PDF 922.3 KB
Appendix A Test Data for BTTest Report2021-03-27PDF 998.8 KB
Test report-DSSTest Report2021-03-27PDF 980 KB
Test report-DTS-BLETest Report2021-03-27PDF 999.3 KB
Declaration Letter of Model DifferenceCover Letter(s)2021-03-27PDF 88.3 KB
FCC Confidentiality request letterCover Letter(s)2021-03-27PDF 117.9 KB
FCC POACover Letter(s)2021-03-27PDF 77.4 KB
RF Exposure Info-MPERF Exposure Info2021-03-27PDF 191.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 63.3 KB
Schematic Metadata onlySchematicsPDF 29.5 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 82.3 KB
Operation description Metadata onlyOperational DescriptionPDF 36.6 KB

Application Information

Application IDuN1aIiAMRvjjc+RftREZfQ==
Final Action Date2021-03-27
Application PurposeOriginal Equipment
Applicant FRN0030520241
ModelE124B
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionLED bluetooth controller
Responsible PartyYong Xie Boris, RD Manager, rd8@szbason.com , 86-13244876922
Test FirmGavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com , 0755-82591330
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
uN1aIiAMRvjjc+RftREZfQ==2021-03-27Original Equipment
szGW6rDADcX2Sokeh0MHeQ==2021-03-27Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.001400015C
2402-2480 MHz0.001300015C

Grants

TCB Grant - Application uN1aIiAMRvjjc+RftREZfQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 03/27/2021

Application Dated: 03/26/2021
Shenzhen Bason Electronics Technology Co., Ltd.
5/F., Bldg B, Huilongda Industrial Park,
Shiyan Street, Baoan
Shenzhen, 518108
China
 
Attention: Yong Xie Boris , RD Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYVG-E124B
Name of Grantee:  Shenzhen Bason Electronics Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: LED bluetooth controller
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0013  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application uN1aIiAMRvjjc+RftREZfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Bason Electronics Technology Co., Ltd.
5/F., Bldg B, Huilongda Industrial Park, Shiyan Street, Baoan
Shenzhen, 518108
China
  Date of Grant: 03/27/2021

Application Dated: 03/26/2021
 
Attention: Yong Xie Boris , RD Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYVG-E124B
Name of Grantee:  Shenzhen Bason Electronics Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: LED bluetooth controller
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0013  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application szGW6rDADcX2Sokeh0MHeQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 03/27/2021

Application Dated: 03/26/2021
Shenzhen Bason Electronics Technology Co., Ltd.
5/F., Bldg B, Huilongda Industrial Park,
Shiyan Street, Baoan
Shenzhen, 518108
China
 
Attention: Yong Xie Boris , RD Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYVG-E124B
Name of Grantee:  Shenzhen Bason Electronics Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LED bluetooth controller
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application szGW6rDADcX2Sokeh0MHeQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Bason Electronics Technology Co., Ltd.
5/F., Bldg B, Huilongda Industrial Park, Shiyan Street, Baoan
Shenzhen, 518108
China
  Date of Grant: 03/27/2021

Application Dated: 03/26/2021
 
Attention: Yong Xie Boris , RD Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AYVG-E124B
Name of Grantee:  Shenzhen Bason Electronics Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LED bluetooth controller
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: