FCC ID 2AYWN-1MW
Communication Module
by Shaper Tools, Inc.
Grantee Code: 2AYWN Product Code: 1MW
Latest application date: 2021-07-02
FCC ID Device Details
| FCC ID | 2AYWN-1MW |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AYWN |
| Product Code | 1MW |
| Applicant Business | Shaper Tools, Inc. 🇺🇸 |
| Related Domains |  shapertools.com |
| Equipment Class | Communication Module |
| Test Firm | MRT Technology (Suzhou) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 | 2021-07-02 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 | 2021-07-02 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/25/2018 | 2021-07-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2021-08-16 | PDF 349.5 KB |
| Product Label Declaration Letter | ID Label/Location Info | 2021-07-02 | PDF 239.2 KB |
| FCC Authorization Letter from Original Grantee | Cover Letter(s) | 2021-07-02 | PDF 24.9 KB |
| FCC Short term confidentiality | Cover Letter(s) | 2021-07-02 | PDF 132.8 KB |
| FCC Special Power of Attorney | Cover Letter(s) | 2021-07-02 | PDF 162 KB |
| Request Change of Identification | Cover Letter(s) | 2021-07-02 | PDF 304 KB |
Application Information
| Application ID | lYyyPOPH9oImW0IqHHNAyQ== |
|---|---|
| Final Action Date | 2021-07-02 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 |
| Applicant FRN | 0030530604 |
| Model | 1MW |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Communication Module |
| Responsible Party | Jeremy Blum, Director of Engineering, jeremy@shapertools.com , +18882811012 |
| Test Firm | Mr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com  , +86-512-66308358 |
| TCB Email | bacl.regulatory@baclcorp.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/16/2021 |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lYyyPOPH9oImW0IqHHNAyQ== | 2021-07-02 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 |
| fE9kPPuWsVZE91FrFSjD9w== | 2021-07-02 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 |
| SxGlutbd2fQyvAuHDOEB4w== | 2021-07-02 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/25/2018 |
Equipment Authorization
Grants
TCB Grant - Application SxGlutbd2fQyvAuHDOEB4w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 07/02/2021 Application Dated: 07/02/2021 |
| Shaper Tools, Inc. |
| 724 Brannan St. |
| San Francisco, CA 94103 |
| Attention: Jeremy Blum , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYWN-1MW |
| Name of Grantee: | Shaper Tools, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0303 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0296 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.0278 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0237 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SxGlutbd2fQyvAuHDOEB4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shaper Tools, Inc. 724 Brannan St. San Francisco, CA 94103 United States |
Date of Grant: 07/02/2021 Application Dated: 07/02/2021 |
| Attention: Jeremy Blum , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYWN-1MW |
| Name of Grantee: | Shaper Tools, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0303 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0296 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.0278 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0237 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 07/02/2021 Application Dated: 07/02/2021 |
| Shaper Tools, Inc. |
| 724 Brannan St. |
| San Francisco, CA 94103 |
| Attention: Jeremy Blum , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYWN-1MW |
| Name of Grantee: | Shaper Tools, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application lYyyPOPH9oImW0IqHHNAyQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shaper Tools, Inc. 724 Brannan St. San Francisco, CA 94103 United States |
Date of Grant: 07/02/2021 Application Dated: 07/02/2021 |
| Attention: Jeremy Blum , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYWN-1MW |
| Name of Grantee: | Shaper Tools, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 07/02/2021 Application Dated: 07/02/2021 |
| Shaper Tools, Inc. |
| 724 Brannan St. |
| San Francisco, CA 94103 |
| Attention: Jeremy Blum , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYWN-1MW |
| Name of Grantee: | Shaper Tools, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0032 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2415 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fE9kPPuWsVZE91FrFSjD9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shaper Tools, Inc. 724 Brannan St. San Francisco, CA 94103 United States |
Date of Grant: 07/02/2021 Application Dated: 07/02/2021 |
| Attention: Jeremy Blum , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AYWN-1MW |
| Name of Grantee: | Shaper Tools, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0032 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2415 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |