FCC ID 2AZ9H-CUBEPXA

Gateway

by ELEVADORES ATLAS SCHINDLER LTDA

Grantee Code: 2AZ9H   Product Code: CUBEPXA
Latest application date: 2021-11-12

FCC ID Device Details

FCC ID2AZ9H-CUBEPXA
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AZ9H
Product CodeCUBEPXA
Applicant BusinessELEVADORES ATLAS SCHINDLER LTDA 🇧🇷
Related Domains schindler.com
Equipment ClassGateway
Test FirmNemko S.p.A.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-11-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-11-12
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROOM32E Grant Date: 04/10/20202021-10-14
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROOM32E Grant Date: 04/10/20202021-10-14

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2021-11-12PDF 965.4 KB
Internal PhotosInternal Photos2021-11-12PDF 681 KB
External PhotosExternal Photos2021-11-12PDF 425.5 KB
External PhotosExternal Photos2021-10-14PDF 305.2 KB
LabelID Label/Location Info2021-11-12PDF 149.2 KB
LabelID Label/Location Info2021-10-14PDF 44.8 KB
Label IIID Label/Location Info2021-10-14PDF 305.2 KB
Test Setup photosTest Setup Photos2021-11-12PDF 550 KB
Test ReportTest Report2021-11-12PDF 3 MB
Agent Authorization LetterCover Letter(s)2021-11-12PDF 151.1 KB
C2PC LetterCover Letter(s)2021-11-12PDF 116.5 KB
Confidentiality LetterCover Letter(s)2021-11-12PDF 109.4 KB
Change ID Permission LetterCover Letter(s)2021-10-14PDF 234.3 KB
Change of FCC ID Request LetterCover Letter(s)2021-10-14PDF 136 KB
RF Exposure ReportRF Exposure Info2021-11-12PDF 60.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 217.1 KB
Schematics Metadata onlySchematicsPDF 231 KB
Schematics II Metadata onlySchematicsPDF 638.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 362.3 KB
Operational Description II Metadata onlyOperational DescriptionPDF 279.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 85 KB
Parts List II Metadata onlyParts List/Tune Up InfoPDF 86.3 KB
Parts List III Metadata onlyParts List/Tune Up InfoPDF 87.7 KB

Application Information

Application IDZ+x+BPk6Fi9eEbe6T7fang==
Final Action Date2021-11-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0031016777
ModelCUBEPXA
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionGateway
Responsible PartyFernando Barella, Purchasing Manager, fernando.barella@schindler.com , 005511994796171
Test FirmRoberto Giampaglia, Nemko S.p.A., segreteria@nemko.com , +39 039 220 12 01
TCB EmailVina.Kerai@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass 2 Permissive Change as described in this filing. Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.

Applications

Application IDDatePurpose
Z+x+BPk6Fi9eEbe6T7fang==2021-11-12Class II permissive change or modification of presently authorized equipment
+USx+lHtk59kJD2mFYkDUg==2021-11-12Class II permissive change or modification of presently authorized equipment
P3h0o9F/rGKxWHpAQG5iKw==2021-10-14Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROOM32E Grant Date: 04/10/2020
5kKlnFMpJGxLdv9FK540GA==2021-10-14Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROOM32E Grant Date: 04/10/2020

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.010000015CCC
2402-2480 MHz0.00615CCC
2402-2480 MHz0.006000015CCC
2412-2462 MHz0.39815CCC

Grants

TCB Grant - Application Z+x+BPk6Fi9eEbe6T7fang==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 11/12/2021

Application Dated: 11/12/2021
ELEVADORES ATLAS SCHINDLER LTDA
Avenida do Estado 6116
Sao Paulo - SP, 01516-900
Brazil
 
Attention: Fernando Barella , Purchasing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZ9H-CUBEPXA
Name of Grantee:  ELEVADORES ATLAS SCHINDLER LTDA
Equipment Class: Digital Transmission System
Notes: Gateway
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  

Class 2 Permissive Change as described in this filing. Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Z+x+BPk6Fi9eEbe6T7fang==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELEVADORES ATLAS SCHINDLER LTDA
Avenida do Estado 6116
Sao Paulo - SP, 01516-900
Brazil
  Date of Grant: 11/12/2021

Application Dated: 11/12/2021
 
Attention: Fernando Barella , Purchasing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZ9H-CUBEPXA
Name of Grantee:  ELEVADORES ATLAS SCHINDLER LTDA
Equipment Class: Digital Transmission System
Notes: Gateway
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  

Class 2 Permissive Change as described in this filing. Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application P3h0o9F/rGKxWHpAQG5iKw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 10/14/2021

Application Dated: 10/01/2021
ELEVADORES ATLAS SCHINDLER LTDA
Avenida do Estado 6116
Sao Paulo - SP, 01516-900
Brazil
 
Attention: Fernando Barella , Purchasing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZ9H-CUBEPXA
Name of Grantee:  ELEVADORES ATLAS SCHINDLER LTDA
Equipment Class: Digital Transmission System
Notes: Bluetooth & BLE Internet of Things Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  
CC 15C 2412.0  -  2462.0 0.398  

Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application P3h0o9F/rGKxWHpAQG5iKw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELEVADORES ATLAS SCHINDLER LTDA
Avenida do Estado 6116
Sao Paulo - SP, 01516-900
Brazil
  Date of Grant: 10/14/2021

Application Dated: 10/01/2021
 
Attention: Fernando Barella , Purchasing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZ9H-CUBEPXA
Name of Grantee:  ELEVADORES ATLAS SCHINDLER LTDA
Equipment Class: Digital Transmission System
Notes: Bluetooth & BLE Internet of Things Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  
CC 15C 2412.0  -  2462.0 0.398  

Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5kKlnFMpJGxLdv9FK540GA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 10/14/2021

Application Dated: 10/01/2021
ELEVADORES ATLAS SCHINDLER LTDA
Avenida do Estado 6116
Sao Paulo - SP, 01516-900
Brazil
 
Attention: Fernando Barella , Purchasing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZ9H-CUBEPXA
Name of Grantee:  ELEVADORES ATLAS SCHINDLER LTDA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth & BLE Internet of Things Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 5kKlnFMpJGxLdv9FK540GA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELEVADORES ATLAS SCHINDLER LTDA
Avenida do Estado 6116
Sao Paulo - SP, 01516-900
Brazil
  Date of Grant: 10/14/2021

Application Dated: 10/01/2021
 
Attention: Fernando Barella , Purchasing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZ9H-CUBEPXA
Name of Grantee:  ELEVADORES ATLAS SCHINDLER LTDA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth & BLE Internet of Things Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +USx+lHtk59kJD2mFYkDUg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 11/12/2021

Application Dated: 11/12/2021
ELEVADORES ATLAS SCHINDLER LTDA
Avenida do Estado 6116
Sao Paulo - SP, 01516-900
Brazil
 
Attention: Fernando Barella , Purchasing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZ9H-CUBEPXA
Name of Grantee:  ELEVADORES ATLAS SCHINDLER LTDA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Gateway
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Class 2 Permissive Change as described in this filing. Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +USx+lHtk59kJD2mFYkDUg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELEVADORES ATLAS SCHINDLER LTDA
Avenida do Estado 6116
Sao Paulo - SP, 01516-900
Brazil
  Date of Grant: 11/12/2021

Application Dated: 11/12/2021
 
Attention: Fernando Barella , Purchasing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZ9H-CUBEPXA
Name of Grantee:  ELEVADORES ATLAS SCHINDLER LTDA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Gateway
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Class 2 Permissive Change as described in this filing. Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: