FCC ID 2AZFE-YG600PLUS
LED Projector
by Shenzhen Shadow Crown Technology Co.,Ltd.
Grantee Code: 2AZFE Product Code: YG600PLUS
Latest application date: 2024-01-08
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2024-01-08 |
| 5180-5240 MHz | Original Equipment | 2024-01-08 |
| 2402-2480 MHz | Original Equipment | 2024-01-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| U Manual | Users Manual | 2024-01-08 | PDF 5.2 MB |
| User Manual | Users Manual | 2024-01-08 | PDF 5.2 MB |
| Internal Photos | Internal Photos | 2024-01-08 | PDF 3.3 MB |
| External Photos | External Photos | 2024-01-08 | PDF 1.2 MB |
| External photos | External Photos | 2024-01-08 | PDF 1.2 MB |
| LabelandLocation | ID Label/Location Info | 2024-01-08 | PDF 525.7 KB |
| label&label location | ID Label/Location Info | 2024-01-08 | PDF 525.7 KB |
| Test Setup Photos | Test Setup Photos | 2024-01-08 | PDF 413.5 KB |
| Test Setup photos | Test Setup Photos | 2024-01-08 | PDF 413.5 KB |
| ANT | Test Report | 2024-01-08 | PDF 1.1 MB |
| Antenna Specification | Test Report | 2024-01-08 | PDF 1.1 MB |
| FCC PART 15.247_BLE | Test Report | 2024-01-08 | PDF 3.8 MB |
| Part 15 247 2.4GWIFI 1 | Test Report | 2024-01-08 | PDF 5 MB |
| Part 15 247 2.4GWIFI 2 | Test Report | 2024-01-08 | PDF 3 MB |
| Test Report | Test Report | 2024-01-08 | PDF 5.4 MB |
| Test Report | Test Report | 2024-01-08 | PDF 5.3 MB |
| 2.911_(d)(5)(i)CertificationEquipmentTypev1.2 | Attestation Statements | 2024-01-08 | PDF 329.8 KB |
| 2.911_(d)(5)(ii)CertificiationApplicantv1.2 | Attestation Statements | 2024-01-08 | PDF 317 KB |
| 2911_(d)(5)(i) Certification Equipment Type v12 | Attestation Statements | 2024-01-08 | PDF 329.8 KB |
| 2911_(d)(5)(ii) Certificiation Applicant v12 | Attestation Statements | 2024-01-08 | PDF 317 KB |
| FCC Long Term Only Confidentiality Request Rev4.1 | Cover Letter(s) | 2024-01-08 | PDF 115.3 KB |
| FCC Short_Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2024-01-08 | PDF 115.3 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2024-01-08 | PDF 115.6 KB |
| Letter of Authorization Rev 1.0 | Cover Letter(s) | 2024-01-08 | PDF 13.7 KB |
| Letter of Authorization Rev1.0 | Cover Letter(s) | 2024-01-08 | PDF 13.7 KB |
| Model Difference | Cover Letter(s) | 2024-01-08 | PDF 112.3 KB |
| MPE | RF Exposure Info | 2024-01-08 | PDF 313.5 KB |
| BlockDiagram Metadata only | Block Diagram | PDF 208.1 KB | |
| SCH Metadata only | Schematics | PDF 687.1 KB | |
| OP Metadata only | Operational Description | PDF 289.8 KB | |
| FCC Software Security Requirements for UNII devices Rev 2.1 Metadata only | SDR Software/Security Info. | PDF 354.5 KB |
Application Information
| Application ID | w2lbWbrIy150uNh/2n5GyA== |
|---|---|
| Final Action Date | 2024-01-08 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0030733513 |
| Model | YG600PLUS |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | LED Projector |
| Responsible Party | peng shen, Quality Manager, peng.shen@hiaao.com  , -86+0755-23319829 |
| Technical Contact | Shenzhen Shadow Crown Technology Co.,Ltd., peng.shen@hiaao.com |
| Test Firm | Simple Guan, Shenzhen Alpha Product Testing Co., LTD., simple@a-lab.cn  , +86 755 29766001-810 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| w2lbWbrIy150uNh/2n5GyA== | 2024-01-08 | Original Equipment |
| l5ThS3HEXIWZFe9D4/+gkw== | 2024-01-08 | Original Equipment |
| /txPNJbVSrhWE481JaXdjw== | 2024-01-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application w2lbWbrIy150uNh/2n5GyA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/08/2024 Application Dated: 01/08/2024 |
| Shenzhen Shadow Crown Technology Co.,Ltd. |
| A9 East 5th Floor,Industrial Building |
| Longwang Miao,Fuyong District |
| Shenzhen, 518100 China |
| Attention: peng shen , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AZFE-YG600PLUS |
| Name of Grantee: | Shenzhen Shadow Crown Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | LED Projector |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00462 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.08158 |
| Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application w2lbWbrIy150uNh/2n5GyA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Shadow Crown Technology Co.,Ltd. A9 East 5th Floor,Industrial Building Longwang Miao,Fuyong District Shenzhen, 518100 China |
Date of Grant: 01/08/2024 Application Dated: 01/08/2024 |
| Attention: peng shen , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AZFE-YG600PLUS |
| Name of Grantee: | Shenzhen Shadow Crown Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | LED Projector |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00462 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.08158 |
| Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/08/2024 Application Dated: 01/08/2024 |
| Shenzhen Shadow Crown Technology Co.,Ltd. |
| A9 East 5th Floor,Industrial Building |
| Longwang Miao,Fuyong District |
| Shenzhen, 518100 China |
| Attention: peng shen , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AZFE-YG600PLUS |
| Name of Grantee: | Shenzhen Shadow Crown Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | LED Projector |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.06654 |
| Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application l5ThS3HEXIWZFe9D4/+gkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Shadow Crown Technology Co.,Ltd. A9 East 5th Floor,Industrial Building Longwang Miao,Fuyong District Shenzhen, 518100 China |
Date of Grant: 01/08/2024 Application Dated: 01/08/2024 |
| Attention: peng shen , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AZFE-YG600PLUS |
| Name of Grantee: | Shenzhen Shadow Crown Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | LED Projector |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.06654 |
| Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/08/2024 Application Dated: 01/08/2024 |
| Shenzhen Shadow Crown Technology Co.,Ltd. |
| A9 East 5th Floor,Industrial Building |
| Longwang Miao,Fuyong District |
| Shenzhen, 518100 China |
| Attention: peng shen , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AZFE-YG600PLUS |
| Name of Grantee: | Shenzhen Shadow Crown Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | LED Projector |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00027 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /txPNJbVSrhWE481JaXdjw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Shadow Crown Technology Co.,Ltd. A9 East 5th Floor,Industrial Building Longwang Miao,Fuyong District Shenzhen, 518100 China |
Date of Grant: 01/08/2024 Application Dated: 01/08/2024 |
| Attention: peng shen , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AZFE-YG600PLUS |
| Name of Grantee: | Shenzhen Shadow Crown Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | LED Projector |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00027 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |