FCC ID 2AZGN-LC300-202103

LC300 LTE CPE

by Ningbo Sunvot Technology Co., Ltd

Grantee Code: 2AZGN   Product Code: LC300202103
Latest application date: 2021-05-27

FCC ID Device Details

FCC ID2AZGN-LC300-202103
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AZGN
Product CodeLC300202103
Applicant BusinessNingbo Sunvot Technology Co., Ltd 🇨🇳
Related Domains sunvot.com
Equipment ClassLC300 LTE CPE
Test FirmCVC Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2021-05-27
5180-5240 MHzOriginal Equipment2021-05-27

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2021-05-27PDF 545.5 KB
Int photoInternal Photos2021-05-27PDF 459.4 KB
Ext photoExternal Photos2021-05-27PDF 369.1 KB
LabelID Label/Location Info2021-05-27PDF 190 KB
labelID Label/Location Info2021-05-27PDF 190 KB
Test photoTest Setup Photos2021-05-27PDF 333.5 KB
test photoTest Setup Photos2021-05-27PDF 333.5 KB
test reportTest Report2021-05-27PDF 4.6 MB
test reportTest Report2021-05-27PDF 4 MB
Agent AuthorizationCover Letter(s)2021-05-27PDF 183.1 KB
FCC Confidentiality Request LetterCover Letter(s)2021-05-27PDF 74.9 KB
FCC Long Term Confidentiality RequestCover Letter(s)2021-05-27PDF 74.9 KB
FCC sample DoC LetterCover Letter(s)2021-05-27PDF 95.9 KB
Model Difference DeclarationCover Letter(s)2021-05-27PDF 152.7 KB
MPE reportRF Exposure Info2021-05-27PDF 154.8 KB
Block Metadata onlyBlock DiagramPDF 63.2 KB
SCH Metadata onlySchematicsPDF 637 KB
OP Metadata onlyOperational DescriptionPDF 100.3 KB

Application Information

Application IDqd8qm5Qour6gpPLIfGLQ/w==
Final Action Date2021-05-27
Application PurposeOriginal Equipment
Applicant FRN0030749063
ModelLC300-202103
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionLC300 LTE CPE
Responsible PartyJonathan Luo, Manager, jonathan.luo@sunvot.com , +8618603012662
Technical ContactNingbo SunvotTechnology Co., Ltd, jonathan.luo@sunvot.com
Test FirmLai Wenjing, CVC Testing Technology Co., Ltd., qt@cvc.org.cn , 86 2032293684
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
qd8qm5Qour6gpPLIfGLQ/w==2021-05-27Original Equipment
HgLG4cPV/QtCslwWyV8lbQ==2021-05-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.328900015CCC, MO
5180-5240 MHz0.313315E38, CC, MO
5745-5825 MHz0.360815E38, CC, MO

Grants

TCB Grant - Application qd8qm5Qour6gpPLIfGLQ/w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/27/2021

Application Dated: 05/27/2021
Ningbo Sunvot Technology Co., Ltd
Building 3,NO 55 Longtan Shan Road, Beilun Daqi,
Ningbo,Zhejiang,
China
 
Attention: Jonathan Luo , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZGN-LC300-202103
Name of Grantee:  Ningbo Sunvot Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: LC300 LTE CPE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.3289  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application qd8qm5Qour6gpPLIfGLQ/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ningbo Sunvot Technology Co., Ltd
Building 3,NO 55 Longtan Shan Road, Beilun Daqi,
Ningbo,Zhejiang,
China
  Date of Grant: 05/27/2021

Application Dated: 05/27/2021
 
Attention: Jonathan Luo , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZGN-LC300-202103
Name of Grantee:  Ningbo Sunvot Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: LC300 LTE CPE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.3289  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application HgLG4cPV/QtCslwWyV8lbQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/27/2021

Application Dated: 05/27/2021
Ningbo Sunvot Technology Co., Ltd
Building 3,NO 55 Longtan Shan Road, Beilun Daqi,
Ningbo,Zhejiang,
China
 
Attention: Jonathan Luo , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZGN-LC300-202103
Name of Grantee:  Ningbo Sunvot Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LC300 LTE CPE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.3133  
38 CC MO 15E 5745.0  -  5825.0 0.3608  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application HgLG4cPV/QtCslwWyV8lbQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ningbo Sunvot Technology Co., Ltd
Building 3,NO 55 Longtan Shan Road, Beilun Daqi,
Ningbo,Zhejiang,
China
  Date of Grant: 05/27/2021

Application Dated: 05/27/2021
 
Attention: Jonathan Luo , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZGN-LC300-202103
Name of Grantee:  Ningbo Sunvot Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LC300 LTE CPE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.3133  
38 CC MO 15E 5745.0  -  5825.0 0.3608  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: