FCC ID 2AZQW-IDS1GATEWAY

Sensor

by Pi Variables Inc

Grantee Code: 2AZQW   Product Code: IDS1GATEWAY
Latest application date: 2022-08-23

FCC ID Device Details

FCC ID2AZQW-IDS1GATEWAY
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AZQW
Product CodeIDS1GATEWAY
Applicant BusinessPi Variables Inc 🇺🇸
Related Domains pi-lit.com
Equipment ClassSensor
Test FirmUL LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2405-2480 MHzOriginal Equipment2022-08-23

Exhibits

DocumentTypeAvailableFile
impact detection system user manaul v5.27.22Users Manual2023-02-19PDF 390 KB
Internal Photos_20220516_v1 - Internal photosInternal Photos2023-02-19PDF 2.4 MB
External photosExternal Photos2023-02-19PDF 5.1 MB
Gateway labelID Label/Location Info2022-08-23PDF 54.6 KB
Label_Drawing_SnapshotID Label/Location Info2022-08-23PDF 45.6 KB
R13852487-EP1 v1 FCC IC PHOTOS EXHIBIT - FINALTest Setup Photos2023-02-19PDF 1.1 MB
10-Inverted F Antenna TITest Report2022-08-23PDF 1.1 MB
R13852487-E2 v1 15.247 RSS-247 Zigbee REPORT- FINALTest Report2022-08-23PDF 1.4 MB
12-FCC Authorization LetterCover Letter(s)2022-08-23PDF 99.7 KB
13-FCC ConfidentialityCover Letter(s)2022-08-23PDF 128.8 KB
R13852487-E1 v1 FCC WWAN_802.15.4 MPE REPORT - FINALRF Exposure Info2022-08-23PDF 279.7 KB
9- Block Diagram (2) Metadata onlyBlock DiagramPDF 92 KB
Schematics_20220516_v1 - 7-PIV025F_SCH [2] Metadata onlySchematicsPDF 181.2 KB
8-FCC Brief Description of Theory and Function(2) Metadata onlyOperational DescriptionPDF 152.2 KB
8-FCC Brief Description of Theory and Function.docx Metadata onlyOperational DescriptionPDF 152 KB
LAN_ Supplemental Data_OD Metadata onlyOperational DescriptionPDF 251.3 KB

Application Information

Application IDoC49wAEMPCmT+V1C0fEksQ==
Final Action Date2022-08-23
Application PurposeOriginal Equipment
Applicant FRN0030850390
ModelIDS1GATEWAY
Frequency Range2405-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionSensor
Responsible PartyJames Selevan, CEO, jim.Selevan@pi-lit.com , 9494159411
Technical ContactLariah Ijames, UL LLC, lariah.ijames@ul.com , 919-549-0945
Test FirmSteven Thompson, UL LLC, steven.d.thompson@ul.com , 919 549 1430
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/19/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is peak conducted. It contains WWAN Modem (FCCID: 2AEMI-B402). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. RF exposure assessment is based on a maximum, source-based duty cycle of 2 % as documented in this filing; any increase in this duty cycle requires a permissive change filing to demonstrate continued compliance with RF exposure requirements.

Applications

Application IDDatePurpose
oC49wAEMPCmT+V1C0fEksQ==2022-08-23Original Equipment

Equipment Authorization

FrequencyOutputRules
2405-2480 MHz0.119400015C

Grants

TCB Grant - Application oC49wAEMPCmT+V1C0fEksQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/23/2022

Application Dated: 08/19/2022
Pi Variables Inc
3002 Dow Avenue
Suite 138
Tustin, CA 92780
 
Attention: James Selevan , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZQW-IDS1GATEWAY
Name of Grantee:  Pi Variables Inc
Equipment Class: Digital Transmission System
Notes: Sensor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.1194  

Output power listed is peak conducted. It contains WWAN Modem (FCCID: 2AEMI-B402). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

RF exposure assessment is based on a maximum, source-based duty cycle of 2 % as documented in this filing; any increase in this duty cycle requires a permissive change filing to demonstrate continued compliance with RF exposure requirements.


EAS Grant - Application oC49wAEMPCmT+V1C0fEksQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Pi Variables Inc
3002 Dow Avenue Suite 138
Tustin, CA 92780
United States
  Date of Grant: 08/23/2022

Application Dated: 08/19/2022
 
Attention: James Selevan , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AZQW-IDS1GATEWAY
Name of Grantee:  Pi Variables Inc
Equipment Class: Digital Transmission System
Notes: Sensor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.1194  

Output power listed is peak conducted. It contains WWAN Modem (FCCID: 2AEMI-B402). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

RF exposure assessment is based on a maximum, source-based duty cycle of 2 % as documented in this filing; any increase in this duty cycle requires a permissive change filing to demonstrate continued compliance with RF exposure requirements.



Mail To: