FCC ID 2BA24LBEE5HY1MW

Communication Module

by Solidrun Ltd.

Grantee Code: 2BA24   Product Code: LBEE5HY1MW
Latest application date: 2023-09-18

FCC ID Device Details

FCC ID2BA24LBEE5HY1MW
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BA24
Product CodeLBEE5HY1MW
Applicant BusinessSolidrun Ltd. 🇮🇱
Related Domains solid-run.com
Equipment ClassCommunication Module
Test FirmNemko Canada Inc. (Montreal)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-09-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-09-18
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2023-09-18
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 11/01/20222023-07-14
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 11/01/20222023-07-14
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 11/01/20222023-07-14

Exhibits

DocumentTypeAvailableFile
Module Integration Instructions updUsers Manual2023-09-18PDF 106.1 KB
installation manual Metadata onlyUsers Manual2023-09-18PDF 629.3 KB
user manualID Label/Location Info2023-07-14PDF 1,007.6 KB
user manualUsers Manual2023-07-14PDF 1,007.6 KB
internal photos - hostInternal Photos2023-09-18PDF 325.7 KB
external photos - hostExternal Photos2023-09-18PDF 354.1 KB
external photosExternal Photos2023-07-14PDF 216.7 KB
packaging labelID Label/Location Info2023-07-14PDF 137.3 KB
test setup photosTest Setup Photos2023-09-18PDF 1.1 MB
antennaTest Report2023-09-18PDF 1.2 MB
test reportTest Report2023-09-18PDF 3.8 MB
test reportTest Report2023-09-18PDF 2 MB
test reportTest Report2023-09-18PDF 2.2 MB
Section 2.911(d)(5)(i)-(ii) filingAttestation Statements2023-09-18PDF 86.1 KB
Section 2.911(d)(7) filingAttestation Statements2023-09-18PDF 127.2 KB
C2PC letterCover Letter(s)2023-09-18PDF 68.9 KB
LMA letterCover Letter(s)2023-09-18PDF 125.1 KB
agent letterCover Letter(s)2023-09-18PDF 40.2 KB
CHID letterCover Letter(s)2023-07-14PDF 142.5 KB
permission letterCover Letter(s)2023-07-14PDF 170.8 KB
MPERF Exposure Info2023-09-18PDF 411 KB

Application Information

Application IDZWEsFH6LFoLl/yE1msnPgw==
Final Action Date2023-09-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0033733148
ModelLBEE5HY1MW
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionCommunication Module
Responsible PartyNissim Cohen, nissim.cohen@solid-run.com , +972546621006
AgentSpencer Spencer Spencer, Nemko Canada, Inc., spencer.zhong@nemko.com , 6473355828
Test FirmCharles Neal, Nemko Canada Inc. (Montreal), charles.neal@nemko.com , 613-737-9680
TCB EmailVina.Kerai@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsThis is a limited certification restricted to grantee's own host products only. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Modification – C2PC

Applications

Application IDDatePurpose
ZWEsFH6LFoLl/yE1msnPgw==2023-09-18Class II permissive change or modification of presently authorized equipment
X2i4gCXWPQUg/KtNkA0M5Q==2023-09-18Class II permissive change or modification of presently authorized equipment
Usc6zXpYGO/Wni0qwzjhMQ==2023-09-18Class II permissive change or modification of presently authorized equipment
z7FhjzJzBv+vQWH5hEssQg==2023-07-14Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 11/01/2022
pH7HFSyzN7DRzMLokm+Aog==2023-07-14Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 11/01/2022
/SfvoXzJazfIwm79+H70OA==2023-07-14Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 11/01/2022

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.007000015CCC
2412-2462 MHz0.241500015CCC
5180-5240 MHz0.030315ECC
5260-5320 MHz0.029615ECC

Grants

TCB Grant - Application ZWEsFH6LFoLl/yE1msnPgw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 09/18/2023

Application Dated: 08/24/2023
Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  

This is a limited certification restricted to grantee's own host products only. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Modification – C2PC


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZWEsFH6LFoLl/yE1msnPgw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
  Date of Grant: 09/18/2023

Application Dated: 08/24/2023
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  

This is a limited certification restricted to grantee's own host products only. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Modification – C2PC


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application z7FhjzJzBv+vQWH5hEssQg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/14/2023

Application Dated: 07/11/2023
Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Communication Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  

Class II Permissive Change to add an alternative antenna. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains WLAN 802.11a/b/g/n transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application z7FhjzJzBv+vQWH5hEssQg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
  Date of Grant: 07/14/2023

Application Dated: 07/11/2023
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Communication Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  

Class II Permissive Change to add an alternative antenna. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains WLAN 802.11a/b/g/n transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application X2i4gCXWPQUg/KtNkA0M5Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 09/18/2023

Application Dated: 08/24/2023
Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0303  
CC 15E 5260.0  -  5320.0 0.0296  

This is a limited certification restricted to grantee's own host products only. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Modification – C2PC


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application X2i4gCXWPQUg/KtNkA0M5Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
  Date of Grant: 09/18/2023

Application Dated: 08/24/2023
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0303  
CC 15E 5260.0  -  5320.0 0.0296  

This is a limited certification restricted to grantee's own host products only. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Modification – C2PC


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Usc6zXpYGO/Wni0qwzjhMQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 09/18/2023

Application Dated: 08/24/2023
Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Digital Transmission System
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2415  

This is a limited certification restricted to grantee's own host products only. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Modification – C2PC


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Usc6zXpYGO/Wni0qwzjhMQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
  Date of Grant: 09/18/2023

Application Dated: 08/24/2023
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Digital Transmission System
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2415  

This is a limited certification restricted to grantee's own host products only. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Modification – C2PC


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application pH7HFSyzN7DRzMLokm+Aog==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/14/2023

Application Dated: 07/11/2023
Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Communication Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0303  
CC 15E 5260.0  -  5320.0 0.0296  

Class II Permissive Change to add an alternative antenna, disable the U-NII-2C & U-NII-3 by software and reduce the output power. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains a Classic Bluetooth transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application pH7HFSyzN7DRzMLokm+Aog==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
  Date of Grant: 07/14/2023

Application Dated: 07/11/2023
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Communication Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0303  
CC 15E 5260.0  -  5320.0 0.0296  

Class II Permissive Change to add an alternative antenna, disable the U-NII-2C & U-NII-3 by software and reduce the output power. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains a Classic Bluetooth transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /SfvoXzJazfIwm79+H70OA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/14/2023

Application Dated: 07/11/2023
Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Digital Transmission System
Notes: Communication Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2415  

Class II Permissive Change to add an alternative antenna, disable the BLE and reduce the output power. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains a Classic Bluetooth transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /SfvoXzJazfIwm79+H70OA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solidrun Ltd.
Mishmar Hayam 1 st.
Akre,
Israel
  Date of Grant: 07/14/2023

Application Dated: 07/11/2023
 
Attention: Nissim Cohen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BA24LBEE5HY1MW
Name of Grantee:  Solidrun Ltd.
Equipment Class: Digital Transmission System
Notes: Communication Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2415  

Class II Permissive Change to add an alternative antenna, disable the BLE and reduce the output power. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains a Classic Bluetooth transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: