FCC ID 2BAG9-W603C00101

WiFi Module

by Shanghai Amphenol Airwave communication Electronics Co. Ltd

Grantee Code: 2BAG9   Product Code: W603C00101
Latest application date: 2024-10-13

FCC ID Device Details

FCC ID2BAG9-W603C00101
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BAG9
Product CodeW603C00101
Applicant BusinessShanghai Amphenol Airwave communication Electronics Co. Ltd 🇨🇳
Related Domains amphenolmcp.com
Equipment ClassWiFi Module
Test FirmSporton International Inc. (Kunshan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-10-13
2402-2480 MHzOriginal Equipment2024-10-13
5180-5240 MHzOriginal Equipment2024-10-13

Exhibits

DocumentTypeAvailableFile
2BAG9-W603C00101_User Manual_r1Users Manual2025-04-12PDF 856.6 KB
2BAG9-W603C00101_InPhoInternal Photos2025-04-12PDF 987.6 KB
2BAG9-W603C00101_ExPhoExternal Photos2025-04-12PDF 976.8 KB
2BAG9-W603C00101_LabelID Label/Location Info2024-10-13PDF 33.9 KB
2BAG9-W603C00101_Label locationID Label/Location Info2024-10-13PDF 24 KB
2BAG9-W603C00101_Tsup_AntennaTest Setup Photos2025-04-12PDF 573.9 KB
2BAG9-W603C00101_Tsup_DSS_BTTest Setup Photos2025-04-12PDF 261.1 KB
2BAG9-W603C00101_Tsup_DTS_WLAN 2.4GTest Setup Photos2025-04-12PDF 210.8 KB
2BAG9-W603C00101_Tsup_NII_DFSTest Setup Photos2025-04-12PDF 111.1 KB
2BAG9-W603C00101_Tsup_NII_U-NII-1,2,3Test Setup Photos2025-04-12PDF 267.3 KB
2BAG9-W603C00101_Antenna ReportTest Report2024-10-13PDF 917.2 KB
2BAG9-W603C00101_TestRpt_DSS_BT_r1Test Report2024-10-13PDF 5.3 MB
2BAG9-W603C00101_TestRpt_DTS_BLETest Report2024-10-13PDF 4.4 MB
2BAG9-W603C00101_TestRpt_DTS_WLAN 2.4G_Part1-2Test Report2024-10-13PDF 5.7 MB
2BAG9-W603C00101_TestRpt_DTS_WLAN 2.4G_Part2-2Test Report2024-10-13PDF 4.7 MB
2BAG9-W603C00101_TestRpt_NII_U-NII-1,2,3_Part1-3_r1Test Report2024-10-13PDF 5.8 MB
2BAG9-W603C00101_TestRpt_NII_U-NII-1,2,3_Part2-3Test Report2024-10-13PDF 5.7 MB
2BAG9-W603C00101_TestRpt_NII_U-NII-1,2,3_Part3-3Test Report2024-10-13PDF 2.8 MB
2BAG9-W603C00101_cvrltr_Certification_2.911d5Attestation Statements2024-10-13PDF 15 KB
2BAG9-W603C00101_cvrltr_Certification_2.911d7Attestation Statements2024-10-13PDF 573.6 KB
2BAG9-W603C00101_cvrltr_FCC Confidentiality Request(LTC+STC)Cover Letter(s)2024-10-13PDF 27.1 KB
2BAG9-W603C00101_cvrltr_FCC POACover Letter(s)2024-10-13PDF 25.3 KB
Request for Modular Approval per section 15.212 requirementsCover Letter(s)2024-10-13PDF 92.9 KB
2BAG9-W603C00101_TestRpt_RFExpRF Exposure Info2024-10-13PDF 766.1 KB
2BAG9-W603C00101_Block Metadata onlyBlock DiagramPDF 130.8 KB
2BAG9-W603C00101_SchemDic Metadata onlySchematicsPDF 349.9 KB
2BAG9-W603C00101_OpDes_r1 Metadata onlyOperational DescriptionPDF 94.3 KB
2BAG9-W603C00101_Device SW Security Statement Metadata onlySDR Software/Security Info.PDF 90 KB
2BAG9-W603C00101_PartsLst Metadata onlyParts List/Tune Up InfoPDF 33.6 KB
2BAG9-W603C00101_Tune Up Metadata onlyParts List/Tune Up InfoPDF 82.7 KB

Application Information

Application IDj41NZeRbyGKBqOEa0i5c2Q==
Final Action Date2024-10-13
Application PurposeOriginal Equipment
Applicant FRN0033495326
ModelW603C00101
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWiFi Module
Responsible PartyNing Huang, Hardware Engineer, ning.huang@amphenolmcp.com , +8613816839699
Test FirmJim Tsai, Sporton International Inc. (Kunshan), JimTsai@sporton.com.tw , +86 0512 57900158
TCB EmailQA65@sporton-usa.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/12/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidths modes. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
j41NZeRbyGKBqOEa0i5c2Q==2024-10-13Original Equipment
hw8A7Ko2DjRKtw4veVZ1lw==2024-10-13Original Equipment
2iNAb/8hQudT1JI7DB75pg==2024-10-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.004100015CCC
2402-2480 MHz0.002215CCC
2412-2462 MHz0.338815CCC
5180-5240 MHz0.035615ECC
5260-5320 MHz0.035315ECC
5500-5700 MHz0.040415ECC
5745-5825 MHz0.04315ECC

Grants

TCB Grant - Application j41NZeRbyGKBqOEa0i5c2Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 10/13/2024

Application Dated: 10/10/2024
Shanghai Amphenol Airwave communication Electronics Co. Ltd
No 689 Shen Nan Road, Xin Zhuang Industry Park
ShangHai, 201108
China
 
Attention: Ning Huang , Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BAG9-W603C00101
Name of Grantee:  Shanghai Amphenol Airwave communication Electronics Co. Ltd
Equipment Class: Digital Transmission System
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0022  
CC 15C 2412.0  -  2462.0 0.3388  

Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidths modes. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application j41NZeRbyGKBqOEa0i5c2Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Amphenol Airwave communication Electronics Co. Ltd
No 689 Shen Nan Road, Xin Zhuang Industry Park
ShangHai, 201108
China
  Date of Grant: 10/13/2024

Application Dated: 10/10/2024
 
Attention: Ning Huang , Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BAG9-W603C00101
Name of Grantee:  Shanghai Amphenol Airwave communication Electronics Co. Ltd
Equipment Class: Digital Transmission System
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0022  
CC 15C 2412.0  -  2462.0 0.3388  

Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidths modes. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hw8A7Ko2DjRKtw4veVZ1lw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 10/13/2024

Application Dated: 10/10/2024
Shanghai Amphenol Airwave communication Electronics Co. Ltd
No 689 Shen Nan Road, Xin Zhuang Industry Park
ShangHai, 201108
China
 
Attention: Ning Huang , Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BAG9-W603C00101
Name of Grantee:  Shanghai Amphenol Airwave communication Electronics Co. Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0041  

Single Modular Approval. Output power is conducted. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application hw8A7Ko2DjRKtw4veVZ1lw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Amphenol Airwave communication Electronics Co. Ltd
No 689 Shen Nan Road, Xin Zhuang Industry Park
ShangHai, 201108
China
  Date of Grant: 10/13/2024

Application Dated: 10/10/2024
 
Attention: Ning Huang , Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BAG9-W603C00101
Name of Grantee:  Shanghai Amphenol Airwave communication Electronics Co. Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0041  

Single Modular Approval. Output power is conducted. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 2iNAb/8hQudT1JI7DB75pg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 10/13/2024

Application Dated: 10/10/2024
Shanghai Amphenol Airwave communication Electronics Co. Ltd
No 689 Shen Nan Road, Xin Zhuang Industry Park
ShangHai, 201108
China
 
Attention: Ning Huang , Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BAG9-W603C00101
Name of Grantee:  Shanghai Amphenol Airwave communication Electronics Co. Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0356  
CC 15E 5260.0  -  5320.0 0.0353  
CC 15E 5500.0  -  5700.0 0.0404  
CC 15E 5745.0  -  5825.0 0.043  

Single Modular Approval. Output power is conducted. This device supports 20MHz, 40MHz and 80MHz bandwidths modes. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 2iNAb/8hQudT1JI7DB75pg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Amphenol Airwave communication Electronics Co. Ltd
No 689 Shen Nan Road, Xin Zhuang Industry Park
ShangHai, 201108
China
  Date of Grant: 10/13/2024

Application Dated: 10/10/2024
 
Attention: Ning Huang , Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BAG9-W603C00101
Name of Grantee:  Shanghai Amphenol Airwave communication Electronics Co. Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0356  
CC 15E 5260.0  -  5320.0 0.0353  
CC 15E 5500.0  -  5700.0 0.0404  
CC 15E 5745.0  -  5825.0 0.043  

Single Modular Approval. Output power is conducted. This device supports 20MHz, 40MHz and 80MHz bandwidths modes. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: