Guangzhou Max Power New Energy Technology Co., LTD CBU-IPEX Module Datasheet CBU-IPEX
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: 2BAGRCBU-IPEX is 2BAGR. The remaining characters of the FCC ID, CBU-IPEX, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Application for Equipment Authorization FCC Form 731 TCB Version
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 04/21/2023
Application Dated: 04/21/2023
Guangzhou Max Power New Energy Technology Co., LTD
25 Guangxing Road, Nansha District,
Guangzhou, Guangdong Province, China
Attention: Jason lee
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2BAGRCBU-IPEX
Name of Grantee:
Guangzhou Max Power New Energy Technology Co., LTD
Equipment Class:
Digital Transmission System
Notes:
CBU-IPEX Module Datasheet
Modular Type:
Single Modular
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
15C
2402.0
-
2480.0
0.00075
15C
2412.0
-
2462.0
0.0237
Output power listed is conducted. The device supports 20MHz and 40MHz bandwidths. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.3dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.
COPY
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION
COPY
Certification
Guangzhou Max Power New Energy Technology Co., LTD
25 Guangxing Road, Nansha District,
Guangzhou, Guangdong Province,
China
Date of Grant: 04/21/2023
Application Dated: 04/21/2023
Attention: Jason lee
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2BAGRCBU-IPEX
Name of Grantee:
Guangzhou Max Power New Energy Technology Co., LTD
Equipment Class:
Digital Transmission System
Notes:
CBU-IPEX Module Datasheet
Modular Type:
Single Modular
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
15C
2402.0
-
2480.0
0.00075
15C
2412.0
-
2462.0
0.0237
Output power listed is conducted. The device supports 20MHz and 40MHz bandwidths. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.3dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.
Mail To:
EA640158
Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details