FCC ID 2BAVS-ATBM6132
ATBM6132
by AltoBeam Inc.
Grantee Code: 2BAVS Product Code: ATBM6132
Latest application date: 2025-03-11
FCC ID Device Details
| FCC ID | 2BAVS-ATBM6132 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BAVS |
| Product Code | ATBM6132 |
| Applicant Business | AltoBeam Inc. 🇨🇳 |
| Related Domains |  altobeam.com |
| Equipment Class | ATBM6132 |
| Test Firm | Sporton International Inc. (Shenzhen) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2025-03-11 |
| 5745-5825 MHz | Original Equipment | 2025-03-11 |
| 5180-5240 MHz | Original Equipment | 2024-06-18 |
| 2402-2480 MHz | Original Equipment | 2024-06-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 2BAVS-ATBM6132_User Manual_r2 Metadata only | Users Manual | 2025-09-08 | PDF 227.8 KB |
| 2BAVS-ATBM6132_User Manual_r3 Metadata only | Users Manual | 2025-09-08 | PDF 253.3 KB |
| 2BAVS-ATBM6132_User Manual_r4 Metadata only | Users Manual | 2025-09-08 | PDF 295.4 KB |
| 2BAVS-ATBM6132_User Manual_r5 | Users Manual | 2025-09-08 | PDF 294.3 KB |
| 2BAVSATBM6132_User Manual_r1 | Users Manual | 2024-12-14 | PDF 296.4 KB |
| 2BAVS-ATBM6132_InPho_r2 | Internal Photos | 2025-09-08 | PDF 426 KB |
| 2BAVSATBM6132_InPho | Internal Photos | 2024-12-14 | PDF 327.4 KB |
| 2BAVS-ATBM6132_ExPho_r1 | External Photos | 2025-09-08 | PDF 1 MB |
| 2BAVSATBM6132_ExPho | External Photos | 2024-12-14 | PDF 872.8 KB |
| 2BAVS-ATBM6132_Label | ID Label/Location Info | 2025-03-11 | PDF 11 KB |
| 2BAVS-ATBM6132_Label Location | ID Label/Location Info | 2025-03-11 | PDF 39.4 KB |
| 2BAVSATBM6132_Label | ID Label/Location Info | 2024-06-18 | PDF 17.3 KB |
| 2BAVSATBM6132_Label Location | ID Label/Location Info | 2024-06-18 | PDF 60.5 KB |
| 2BAVS-ATBM6132_Tsup_Antenna | Test Setup Photos | 2025-09-08 | PDF 341.2 KB |
| 2BAVS-ATBM6132_Tsup_DTS_BLE | Test Setup Photos | 2025-09-08 | PDF 262.5 KB |
| 2BAVS-ATBM6132_Tsup_DTS_WLAN 2.4G | Test Setup Photos | 2025-09-08 | PDF 264 KB |
| 2BAVS-ATBM6132_Tsup_NII_DFS | Test Setup Photos | 2025-09-08 | PDF 82 KB |
| 2BAVS-ATBM6132_Tsup_NII_U-NII-1,2,3 | Test Setup Photos | 2025-09-08 | PDF 247.8 KB |
| 2BAVSATBM6132_Tsup_Antenna Report | Test Setup Photos | 2024-12-14 | PDF 420 KB |
| 2BAVSATBM6132_Tsup_DTS_BLE | Test Setup Photos | 2024-12-14 | PDF 235.1 KB |
| 2BAVSATBM6132_Tsup_DTS_WLAN 2.4G | Test Setup Photos | 2024-12-14 | PDF 239.5 KB |
| 2BAVSATBM6132_Tsup_NII_DFS | Test Setup Photos | 2024-12-14 | PDF 67.3 KB |
| 2BAVSATBM6132_Tsup_NII_U-NII-1,2,3 | Test Setup Photos | 2024-12-14 | PDF 357.6 KB |
| 2BAVS-ATBM6132_Antenna Report | Test Report | 2025-03-11 | PDF 1.1 MB |
| 2BAVS-ATBM6132_TestRpt_DTS_BLE_r1 | Test Report | 2025-03-11 | PDF 3.4 MB |
| 2BAVS-ATBM6132_TestRpt_DTS_WLAN 2.4G_Part1-2_r1 | Test Report | 2025-03-11 | PDF 5.6 MB |
| 2BAVS-ATBM6132_TestRpt_DTS_WLAN 2.4G_Part2-2 | Test Report | 2025-03-11 | PDF 4.6 MB |
| 2BAVS-ATBM6132_TestRpt_NII_DFS_r1 Metadata only | Test Report | 2025-03-11 | PDF 1.5 MB |
| 2BAVS-ATBM6132_TestRpt_NII_DFS_r2 | Test Report | 2025-03-11 | PDF 1.6 MB |
| 2BAVS-ATBM6132_TestRpt_NII_U-NII-1,2,3_Part1-3_r1 | Test Report | 2025-03-11 | PDF 5.6 MB |
| 2BAVS-ATBM6132_TestRpt_NII_U-NII-1,2,3_Part2-3 | Test Report | 2025-03-11 | PDF 5.7 MB |
| 2BAVS-ATBM6132_TestRpt_NII_U-NII-1,2,3_Part3-3 | Test Report | 2025-03-11 | PDF 2.1 MB |
| 2BAVSATBM6132_Antenna Report | Test Report | 2024-06-18 | PDF 959.8 KB |
| 2BAVSATBM6132_TestRpt_DTS_BLE | Test Report | 2024-06-18 | PDF 2.7 MB |
| 2BAVSATBM6132_TestRpt_DTS_WLAN 2.4G_Part1-2 | Test Report | 2024-06-18 | PDF 5.7 MB |
| 2BAVSATBM6132_TestRpt_DTS_WLAN 2.4G_Part2-2 | Test Report | 2024-06-18 | PDF 1.9 MB |
| 2BAVSATBM6132_TestRpt_NII_DFS | Test Report | 2024-06-18 | PDF 1.5 MB |
| 2BAVSATBM6132_TestRpt_NII_U-NII-1,2,3_Part1-2 | Test Report | 2024-06-18 | PDF 5.7 MB |
| 2BAVSATBM6132_TestRpt_NII_U-NII-1,2,3_Part2-2 | Test Report | 2024-06-18 | PDF 1.7 MB |
| 2BAVS-ATBM6132_cvrltr_Certification_2.911d5 (i) | Attestation Statements | 2025-03-11 | PDF 80.1 KB |
| 2BAVS-ATBM6132_cvrltr_Certification_2.911d5 (ii) | Attestation Statements | 2025-03-11 | PDF 80.1 KB |
| 2BAVS-ATBM6132_cvrltr_FCC Certification_2.911d7 | Attestation Statements | 2025-03-11 | PDF 303.8 KB |
| 2BAVSATBM6132_cvrltr_FCC Certification_2.911d5 | Attestation Statements | 2024-06-18 | PDF 81.5 KB |
| 2BAVSATBM6132_cvrltr_FCC Certification_2.911d7 | Attestation Statements | 2024-06-18 | PDF 309.1 KB |
| 2BAVS-ATBM6132_cvrltr_FCC Long-term Confidentiality | Cover Letter(s) | 2025-03-11 | PDF 116.9 KB |
| 2BAVS-ATBM6132_cvrltr_FCC POA | Cover Letter(s) | 2025-03-11 | PDF 128.6 KB |
| 2BAVS-ATBM6132_cvrltr_FCC Short-term Confidentiality | Cover Letter(s) | 2025-03-11 | PDF 159.6 KB |
| Module Approval Requirements | Cover Letter(s) | 2025-03-11 | PDF 150.1 KB |
| 2BAVSATBM6132_cvrltr_FCC Long-term Confidentiality | Cover Letter(s) | 2024-06-18 | PDF 117.4 KB |
| 2BAVSATBM6132_cvrltr_FCC POA | Cover Letter(s) | 2024-06-18 | PDF 129.9 KB |
| 2BAVSATBM6132_cvrltr_FCC Short-term Confidentiality | Cover Letter(s) | 2024-06-18 | PDF 140.4 KB |
| Request for Modular Approval per section 15.212 requirements | Cover Letter(s) | 2024-06-18 | PDF 149.5 KB |
| 2BAVS-ATBM6132_TestRpt_RFExp | RF Exposure Info | 2025-03-11 | PDF 562.2 KB |
| 2BAVSATBM6132_TestRpt_RFExp | RF Exposure Info | 2024-06-18 | PDF 384.3 KB |
| 2BAVS-ATBM6132_BlckDic Metadata only | Block Diagram | PDF 74.4 KB | |
| 2BAVSATBM6132_Block Diagram Metadata only | Block Diagram | PDF 8.4 KB | |
| 2BAVS-ATBM6132_SchemDic Metadata only | Schematics | PDF 48.3 KB | |
| 2BAVSATBM6132_Schematic Metadata only | Schematics | PDF 91.3 KB | |
| 2BAVS-ATBM6132_OpDes_r2 Metadata only | Operational Description | PDF 338.5 KB | |
| 2BAVSATBM6132_Operation Description Metadata only | Operational Description | PDF 279.5 KB | |
| 2BAVS-ATBM6132_Device SW Security Statement_r1 Metadata only | SDR Software/Security Info. | PDF 78.7 KB | |
| 2BAVS-ATBM6132_PartsLst Metadata only | Parts List/Tune Up Info | PDF 36.3 KB | |
| 2BAVS-ATBM6132_Tune Up Metadata only | Parts List/Tune Up Info | PDF 78.7 KB | |
| 2BAVSATBM6132_PartLst Metadata only | Parts List/Tune Up Info | PDF 69.6 KB | |
| 2BAVSATBM6132_Tune Up Metadata only | Parts List/Tune Up Info | PDF 37.7 KB |
Application Information
| Application ID | DxdiqVSJEgSBHiXVzFpvDw== |
|---|---|
| Final Action Date | 2025-03-11 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0033248568 |
| Model | ATBM6132 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | ATBM6132 |
| Responsible Party | Nan Li, linan@altobeam.com , +86-1062701811 |
| Test Firm | Johnny Chen, Sporton International Inc. (Shenzhen), JohnnyChen@sporton-lab.com  , 86-0755-86379589 |
| TCB Email | QA65@sporton-usa.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/08/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Limited Single Modular Approval. Output power is conducted. This device supports 20 and 40 MHz bandwidths modes. This Module is limited for not having RF shielding, requiring the grantee to file a Class II permissive change for each specific host per the test plan defined in the module integration instructions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this transmitter with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements and multi-transmitter product guidelines. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| DxdiqVSJEgSBHiXVzFpvDw== | 2025-03-11 | Original Equipment |
| /3ISg1/bx0V0kF5Kgo/kLA== | 2025-03-11 | Original Equipment |
| p56kkZQEZuk+QZLKKgOffQ== | 2024-06-18 | Original Equipment |
| S4IhVPG+mrYcycZn+NGHbQ== | 2024-06-18 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application S4IhVPG+mrYcycZn+NGHbQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/18/2024 Application Dated: 06/17/2024 |
| AltoBeam Inc. |
| B808,Tsinghua Tongfang Hi-Tech Plaza,Haidian |
| Beijing, China |
| Attention: Nan Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAVSATBM6132 |
| Name of Grantee: | AltoBeam Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | ATBM6132 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0074 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.4603 |
| Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application S4IhVPG+mrYcycZn+NGHbQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
AltoBeam Inc. B808,Tsinghua Tongfang Hi-Tech Plaza,Haidian Beijing, China |
Date of Grant: 06/18/2024 Application Dated: 06/17/2024 |
| Attention: Nan Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAVSATBM6132 |
| Name of Grantee: | AltoBeam Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | ATBM6132 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0074 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.4603 |
| Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/18/2024 Application Dated: 06/17/2024 |
| AltoBeam Inc. |
| B808,Tsinghua Tongfang Hi-Tech Plaza,Haidian |
| Beijing, China |
| Attention: Nan Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAVSATBM6132 |
| Name of Grantee: | AltoBeam Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ATBM6132 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.114 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.1064 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.1074 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.1038 |
| Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application p56kkZQEZuk+QZLKKgOffQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
AltoBeam Inc. B808,Tsinghua Tongfang Hi-Tech Plaza,Haidian Beijing, China |
Date of Grant: 06/18/2024 Application Dated: 06/17/2024 |
| Attention: Nan Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAVSATBM6132 |
| Name of Grantee: | AltoBeam Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ATBM6132 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.114 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.1064 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.1074 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.1038 |
| Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/11/2025 Application Dated: 03/11/2025 |
| AltoBeam Inc. |
| B808,Tsinghua Tongfang Hi-Tech Plaza,Haidian |
| Beijing, China |
| Attention: Nan Li , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAVS-ATBM6132 |
| Name of Grantee: | AltoBeam Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | ATBM6132 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0145 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.5754 |
| Limited Single Modular Approval. Output power is conducted. This device supports 20 and 40 MHz bandwidths modes. This Module is limited for not having RF shielding, requiring the grantee to file a Class II permissive change for each specific host per the test plan defined in the module integration instructions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this transmitter with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements and multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application /3ISg1/bx0V0kF5Kgo/kLA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/11/2025 Application Dated: 03/11/2025 |
| AltoBeam Inc. |
| B808,Tsinghua Tongfang Hi-Tech Plaza,Haidian |
| Beijing, China |
| Attention: Nan Li , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAVS-ATBM6132 |
| Name of Grantee: | AltoBeam Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ATBM6132 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.1268 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.1247 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.1096 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.118 |
| Limited Single Modular Approval. Output power is conducted. This device supports 20 and 40 MHz bandwidths modes. This Module is limited for not having RF shielding, requiring the grantee to file a Class II permissive change for each specific host per the test plan defined in the module integration instructions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this transmitter with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements and multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |