FCC ID 2BAWR-X6
ISOD Cutting Machine
by ZAGG Inc
Grantee Code: 2BAWR Product Code: X6
Latest application date: 2023-05-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Original Equipment | 2023-05-26 |
| 2412-2462 MHz | Original Equipment | 2023-05-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2023-05-26 | PDF 5.5 MB |
| Internal photos | Internal Photos | 2023-05-26 | PDF 3.5 MB |
| External photos | External Photos | 2023-05-26 | PDF 1.4 MB |
| Label and label location | ID Label/Location Info | 2023-05-26 | PDF 320.9 KB |
| Test setup photos | Test Setup Photos | 2023-05-26 | PDF 906.4 KB |
| Antenna information WLAN | Test Report | 2023-05-26 | PDF 697.2 KB |
| Appendix A test data 2G4WLAN | Test Report | 2023-05-26 | PDF 4.1 MB |
| Appendix B test data 5GWLAN band 1 | Test Report | 2023-05-26 | PDF 5.4 MB |
| Appendix C test data 5GWLAN band 3 | Test Report | 2023-05-26 | PDF 5.4 MB |
| Test Report 2G4WLAN | Test Report | 2023-05-26 | PDF 2.2 MB |
| Test Report 5GWLAN band 1 | Test Report | 2023-05-26 | PDF 2.2 MB |
| Test Report 5GWLAN band 3 | Test Report | 2023-05-26 | PDF 2.2 MB |
| Agent attestation letter | Attestation Statements | 2023-05-26 | PDF 19.5 KB |
| Covered equipment identification letter | Attestation Statements | 2023-05-26 | PDF 166.8 KB |
| Covered equipment letter | Attestation Statements | 2023-05-26 | PDF 170.2 KB |
| Confidentiality request letter | Cover Letter(s) | 2023-05-26 | PDF 160.9 KB |
| Letter of declaration disable channel 12 and 13 by software | Cover Letter(s) | 2023-05-26 | PDF 156.3 KB |
| RF exposure evaluation | RF Exposure Info | 2023-05-26 | PDF 371.4 KB |
| Block diagram Metadata only | Block Diagram | PDF 33.1 KB | |
| Schematics Metadata only | Schematics | PDF 112.7 KB | |
| Letter of declaration software configuration control Metadata only | Operational Description | PDF 72.8 KB | |
| Letter of declaration unii device Metadata only | Operational Description | PDF 184.2 KB | |
| Letter of declaration unii device software security requirements Metadata only | Operational Description | PDF 153.9 KB | |
| Operation description Metadata only | Operational Description | PDF 178.2 KB |
Application Information
| Application ID | hZxu2jFpboWL8qE0lhJMyw== |
|---|---|
| Final Action Date | 2023-05-26 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0033676990 |
| Model | X6 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | ISOD Cutting Machine |
| Responsible Party | Zachary Hafer, zachary.hafer@zagg.com  , 385.529.7455 |
| Test Firm | Gavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com  , 0755-82591330 |
| TCB Email | o.kneip@kl-certification.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is maximum average conducted output power. The device supports 20 MHz, 40 MHz bandwidth and a/n modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device supports 2.4 GHz WLAN and 5 GHz WLAN transmitters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hZxu2jFpboWL8qE0lhJMyw== | 2023-05-26 | Original Equipment |
| 15AJYV/7hp5uZdXs0W+JeA== | 2023-05-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application hZxu2jFpboWL8qE0lhJMyw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 05/26/2023 Application Dated: 05/26/2023 |
| ZAGG Inc |
| 910 West Legacy Center Way, Suite 500 Midvale |
| salt lake city, UT 84047 |
| Attention: Zachary Hafer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAWR-X6 |
| Name of Grantee: | ZAGG Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ISOD Cutting Machine |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0205 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0153 |
| Power listed is maximum average conducted output power. The device supports 20 MHz, 40 MHz bandwidth and a/n modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device supports 2.4 GHz WLAN and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application hZxu2jFpboWL8qE0lhJMyw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ZAGG Inc 910 West Legacy Center Way, Suite 500 Midvale salt lake city, UT 84047 United States |
Date of Grant: 05/26/2023 Application Dated: 05/26/2023 |
| Attention: Zachary Hafer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAWR-X6 |
| Name of Grantee: | ZAGG Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ISOD Cutting Machine |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0205 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0153 |
| Power listed is maximum average conducted output power. The device supports 20 MHz, 40 MHz bandwidth and a/n modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device supports 2.4 GHz WLAN and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 05/26/2023 Application Dated: 05/26/2023 |
| ZAGG Inc |
| 910 West Legacy Center Way, Suite 500 Midvale |
| salt lake city, UT 84047 |
| Attention: Zachary Hafer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAWR-X6 |
| Name of Grantee: | ZAGG Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | ISOD Cutting Machine |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0402 |
| Power listed is maximum peak conducted output power. The device supports 20 MHz, 40 MHz bandwidth and b/g/n modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device supports 2.4 GHz WLAN and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 15AJYV/7hp5uZdXs0W+JeA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ZAGG Inc 910 West Legacy Center Way, Suite 500 Midvale salt lake city, UT 84047 United States |
Date of Grant: 05/26/2023 Application Dated: 05/26/2023 |
| Attention: Zachary Hafer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BAWR-X6 |
| Name of Grantee: | ZAGG Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | ISOD Cutting Machine |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0402 |
| Power listed is maximum peak conducted output power. The device supports 20 MHz, 40 MHz bandwidth and b/g/n modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device supports 2.4 GHz WLAN and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |