FCC ID 2BB5A-GV2

KartaLink

by Grab Technology LLC

Grantee Code: 2BB5A   Product Code: GV2
Latest application date: 2024-04-25

FCC ID Device Details

FCC ID2BB5A-GV2
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BB5A
Product CodeGV2
Applicant BusinessGrab Technology LLC 🇺🇸
Related Domains grab.com
Equipment ClassKartaLink
Test FirmShenzhen ZKT Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-04-25
2402-2480 MHzOriginal Equipment2024-04-25

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2024-04-25PDF 1.2 MB
Internal photosInternal Photos2024-04-25PDF 4.8 MB
External PhotosExternal Photos2024-04-25PDF 3.7 MB
Label & label locationID Label/Location Info2024-04-25PDF 186.2 KB
Test setup photosTest Setup Photos2024-04-25PDF 1.2 MB
Antenna specificationTest Report2024-04-25PDF 2.2 MB
Test report-2.4GWIFITest Report2024-04-25PDF 4.8 MB
Test report-BLETest Report2024-04-25PDF 2.3 MB
Test report-BT_Part1Test Report2024-04-25PDF 4.9 MB
Test report-BT_Part2Test Report2024-04-25PDF 2.1 MB
Covered Equipment Attestation_2.911(d)(5)(i) and (ii)Attestation Statements2024-04-25PDF 17.9 KB
US_Agent_2.911(d)(7)-U_V05Attestation Statements2024-04-25PDF 25.9 KB
FCC Confidentiality request letterCover Letter(s)2024-04-25PDF 23.3 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2024-04-25PDF 112.7 KB
FCC POACover Letter(s)2024-04-25PDF 18.5 KB
RF Exposure-MPERF Exposure Info2024-04-25PDF 92.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 80.7 KB
schematic Metadata onlySchematicsPDF 381.5 KB
Operational description Metadata onlyOperational DescriptionPDF 22.9 KB

Application Information

Application IDrUByfKk9pRdypZlYaRFdGg==
Final Action Date2024-04-25
Application PurposeOriginal Equipment
Applicant FRN0034021824
ModelGV2
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionKartaLink
Responsible PartyAmanda Louise Paige Maggiora, office.us.admin@grab.com , 425.214.2193
Test FirmLake Xie, Shenzhen ZKT Technology Co., Ltd., zkt@zkt-lab.com , 0086-13620010775
TCB Emailjoerdismitzloff@eurofins.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
rUByfKk9pRdypZlYaRFdGg==2024-04-25Original Equipment
L+9HmiSCc7q7bskRlPeiXw==2024-04-25Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.001900015C
2402-2480 MHz0.000515C
2412-2462 MHz0.025615C

Grants

TCB Grant - Application rUByfKk9pRdypZlYaRFdGg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 04/25/2024

Application Dated: 04/25/2024
Grab Technology LLC
113 Cherry ST PMB 78120 Seattle, WA 98104 USA
Seattle, WA 98104
 
Attention: Amanda Maggiora

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BB5A-GV2
Name of Grantee:  Grab Technology LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: KartaLink
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0019  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application rUByfKk9pRdypZlYaRFdGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Grab Technology LLC
113 Cherry ST PMB 78120 Seattle, WA 98104 USA
Seattle, WA 98104
United States
  Date of Grant: 04/25/2024

Application Dated: 04/25/2024
 
Attention: Amanda Maggiora

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BB5A-GV2
Name of Grantee:  Grab Technology LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: KartaLink
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0019  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application L+9HmiSCc7q7bskRlPeiXw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 04/25/2024

Application Dated: 04/25/2024
Grab Technology LLC
113 Cherry ST PMB 78120 Seattle, WA 98104 USA
Seattle, WA 98104
 
Attention: Amanda Maggiora

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BB5A-GV2
Name of Grantee:  Grab Technology LLC
Equipment Class: Digital Transmission System
Notes: KartaLink
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0005  
15C 2412.0  -  2462.0 0.0256  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application L+9HmiSCc7q7bskRlPeiXw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Grab Technology LLC
113 Cherry ST PMB 78120 Seattle, WA 98104 USA
Seattle, WA 98104
United States
  Date of Grant: 04/25/2024

Application Dated: 04/25/2024
 
Attention: Amanda Maggiora

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BB5A-GV2
Name of Grantee:  Grab Technology LLC
Equipment Class: Digital Transmission System
Notes: KartaLink
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0005  
15C 2412.0  -  2462.0 0.0256  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: