FCC ID 2BBC9-ENPULSE

ENPULSE

by Codev Dynamics Technology Co., Ltd

Grantee Code: 2BBC9   Product Code: ENPULSE
Latest application date: 2023-07-19

FCC ID Device Details

FCC ID2BBC9-ENPULSE
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BBC9
Product CodeENPULSE
Applicant BusinessCodev Dynamics Technology Co., Ltd 🇨🇳
Related Domains codevdynamics.com
Equipment ClassENPULSE
Test FirmCHINA CERTIFICATION ICT CO., LTD (DONGGUAN)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2405-2470 MHzOriginal Equipment2023-07-19
5735-5865 MHzOriginal Equipment2023-07-19

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-07-19PDF 2 MB
Internal PhotosInternal Photos2023-07-19PDF 1.7 MB
External PhotosExternal Photos2023-07-19PDF 1.4 MB
Label & Label LocationID Label/Location Info2023-07-19PDF 359.3 KB
Test Setup PhotosTest Setup Photos2023-07-19PDF 218.6 KB
Test Setup PhotosTest Setup Photos2023-07-19PDF 204.9 KB
Antenna SpecificationTest Report2023-07-19PDF 536.1 KB
Test ReportTest Report2023-07-19PDF 533.9 KB
Test ReportTest Report2023-07-19PDF 616 KB
2.911 (d)(5)(i)(ii) Attestation StatementAttestation Statements2023-07-19PDF 307.9 KB
US Agent Attestation LetterAttestation Statements2023-07-19PDF 685.7 KB
FCC Agent Authorization LetterCover Letter(s)2023-07-19PDF 524.8 KB
FCC Long-term Confidential RequestCover Letter(s)2023-07-19PDF 177.8 KB
RF ExposureRF Exposure Info2023-07-19PDF 145.7 KB
RF ExposureRF Exposure Info2023-07-19PDF 142.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 145.2 KB
Schematics Metadata onlySchematicsPDF 428.4 KB
Circuit Description Metadata onlyOperational DescriptionPDF 162.6 KB

Application Information

Application IDr8ZlKElQCkrIOrlYSAu0tA==
Final Action Date2023-07-19
Application PurposeOriginal Equipment
Applicant FRN0033343484
ModelENPULSE
Frequency Range2405-2470 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionENPULSE
Responsible Partysun cheng, zy.zhang@codevdynamics.com , +86 17625350083
Test FirmTanie Ou, CHINA CERTIFICATION ICT CO., LTD (DONGGUAN), qa@ccttt.com.cn , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
r8ZlKElQCkrIOrlYSAu0tA==2023-07-19Original Equipment
8dHZiBWldAIrK93lhWn9IQ==2023-07-19Original Equipment

Equipment Authorization

FrequencyOutputRules
2405-2470 MHz0.323000015C
5735-5865 MHz15C

Grants

TCB Grant - Application r8ZlKElQCkrIOrlYSAu0tA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 07/19/2023

Application Dated: 07/19/2023
Codev Dynamics Technology Co., Ltd
Room 149, No.8 Weiye Road, Development Zone,
kunshan,
China
 
Attention: sun cheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BBC9-ENPULSE
Name of Grantee:  Codev Dynamics Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: ENPULSE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2470.0 0.323  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application r8ZlKElQCkrIOrlYSAu0tA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Codev Dynamics Technology Co., Ltd
Room 149, No.8 Weiye Road, Development Zone,
kunshan,
China
  Date of Grant: 07/19/2023

Application Dated: 07/19/2023
 
Attention: sun cheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BBC9-ENPULSE
Name of Grantee:  Codev Dynamics Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: ENPULSE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2470.0 0.323  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 8dHZiBWldAIrK93lhWn9IQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 07/19/2023

Application Dated: 07/19/2023
Codev Dynamics Technology Co., Ltd
Room 149, No.8 Weiye Road, Development Zone,
kunshan,
China
 
Attention: sun cheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BBC9-ENPULSE
Name of Grantee:  Codev Dynamics Technology Co., Ltd
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: ENPULSE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5735.0  -  5865.0  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 8dHZiBWldAIrK93lhWn9IQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Codev Dynamics Technology Co., Ltd
Room 149, No.8 Weiye Road, Development Zone,
kunshan,
China
  Date of Grant: 07/19/2023

Application Dated: 07/19/2023
 
Attention: sun cheng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BBC9-ENPULSE
Name of Grantee:  Codev Dynamics Technology Co., Ltd
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: ENPULSE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5735.0  -  5865.0  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: