FCC ID 2BC6T-ZERO3W
Radxa ZERO 3W
by Radxa Computer (Shenzhen) Co., Ltd.
Grantee Code: 2BC6T Product Code: ZERO3W
Latest application date: 2026-01-11
FCC ID Device Details
| FCC ID | 2BC6T-ZERO3W |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BC6T |
| Product Code | ZERO3W |
| Applicant Business | Radxa Computer (Shenzhen) Co., Ltd. 🇨🇳 |
| Related Domains |  radxa.com  antekservice.com |
| Equipment Class | Radxa ZERO 3W |
| Test Firm | SHENZHEN STS TEST SERVICES CO.,LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-01-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-01-11 |
| 5725-5850 MHz | Class II permissive change or modification of presently authorized equipment | 2026-01-11 |
| 5150-5250 MHz | Original Equipment | 2024-05-06 |
| 2402-2480 MHz | Original Equipment | 2024-05-06 |
| 2402-2480 MHz | Original Equipment | 2024-05-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| UserManual | Users Manual | 2026-01-11 | PDF 1.2 MB |
| User Manual | Users Manual | 2024-05-06 | PDF 1.1 MB |
| User Maunal | Users Manual | 2024-05-06 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2026-01-11 | PDF 526.4 KB |
| Internal photos | Internal Photos | 2026-01-11 | PDF 526.4 KB |
| Internal photo | Internal Photos | 2024-05-06 | PDF 801.2 KB |
| EXT PHOTO | External Photos | 2026-01-11 | PDF 999.7 KB |
| External Photos | External Photos | 2026-01-11 | PDF 999.7 KB |
| External photos | External Photos | 2026-01-11 | PDF 999.7 KB |
| External Photo | External Photos | 2024-05-06 | PDF 669.2 KB |
| External photo | External Photos | 2024-05-06 | PDF 669.2 KB |
| Label and location | ID Label/Location Info | 2026-01-11 | PDF 217.3 KB |
| Label-location | ID Label/Location Info | 2026-01-11 | PDF 217.3 KB |
| label | ID Label/Location Info | 2024-05-06 | PDF 216 KB |
| Test photos | Test Setup Photos | 2026-01-11 | PDF 643.3 KB |
| TestSetupPhotos | Test Setup Photos | 2026-01-11 | PDF 643.3 KB |
| test photo | Test Setup Photos | 2024-05-06 | PDF 358.4 KB |
| ANT 1 | Test Report | 2026-01-11 | PDF 675.2 KB |
| ANT 2 | Test Report | 2026-01-11 | PDF 2.6 MB |
| Part 15.247-BLE | Test Report | 2026-01-11 | PDF 2.2 MB |
| Part 15.247-DSS | Test Report | 2026-01-11 | PDF 1.7 MB |
| Part 15.247-WLAN | Test Report | 2026-01-11 | PDF 1.8 MB |
| Part 15.407-U-NII 1 4 | Test Report | 2026-01-11 | PDF 2.4 MB |
| 2.4G wifi report | Test Report | 2024-05-06 | PDF 3.9 MB |
| 5G WIFI Report_1 | Test Report | 2024-05-06 | PDF 4.4 MB |
| 5G WIFI Report_2 | Test Report | 2024-05-06 | PDF 4.1 MB |
| 5G WIFI Report_3 | Test Report | 2024-05-06 | PDF 5.1 MB |
| Antenna Specification | Test Report | 2024-05-06 | PDF 2.2 MB |
| BLE report | Test Report | 2024-05-06 | PDF 4.3 MB |
| test report 1 | Test Report | 2024-05-06 | PDF 3 MB |
| test report 3 | Test Report | 2024-05-06 | PDF 3.9 MB |
| 2.911 (d)(5)(i)CertificationEquipmentTypev1.2 | Attestation Statements | 2026-01-11 | PDF 420.7 KB |
| 2.911 (d)(5)(ii)CertificationApplicantv1.3 | Attestation Statements | 2026-01-11 | PDF 404.8 KB |
| 2.911 (d)(5)(ii)CertificiationApplicantv1.2 | Attestation Statements | 2026-01-11 | PDF 404.8 KB |
| 2.911 (d)(7)USAgentforServiceofProcessv1.3 | Attestation Statements | 2026-01-11 | PDF 148.5 KB |
| 2.911_(d)(5)(i) Certification Equipment Type v1.2 | Attestation Statements | 2026-01-11 | PDF 420.7 KB |
| 2.911_(d)(5)(ii) Certificiation Applicant v1.3 | Attestation Statements | 2026-01-11 | PDF 404.8 KB |
| 2.911_(d)(7) US AGENT | Attestation Statements | 2026-01-11 | PDF 148.5 KB |
| 2.911d 5 i Certification Equipment Type | Attestation Statements | 2024-05-06 | PDF 341.7 KB |
| 2.911d 5 ii Certificiation Applicant | Attestation Statements | 2024-05-06 | PDF 326.7 KB |
| US Agent for Service Process | Attestation Statements | 2024-05-06 | PDF 241.8 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2026-01-11 | PDF 68.3 KB |
| FCC Class II Permissive Change Request Letter | Cover Letter(s) | 2026-01-11 | PDF 188.4 KB |
| FCC Long&ShortTermConfidentialityRequest GTST1187 497 5750920 | Cover Letter(s) | 2026-01-11 | PDF 126.5 KB |
| FCC Modular Approval Request Rev 3.0 | Cover Letter(s) | 2026-01-11 | PDF 145 KB |
| FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 2026-01-11 | PDF 126.5 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2026-01-11 | PDF 127 KB |
| Model Difference | Cover Letter(s) | 2026-01-11 | PDF 151.8 KB |
| Model Difference Declaration | Cover Letter(s) | 2026-01-11 | PDF 151.8 KB |
| Agent Authorization | Cover Letter(s) | 2024-05-06 | PDF 68.1 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2024-05-06 | PDF 160.4 KB |
| FCC Short Long Term Confidentiality Request | Cover Letter(s) | 2024-05-06 | PDF 125.5 KB |
| FCC Software Configuration Control Declaration | Cover Letter(s) | 2024-05-06 | PDF 125.8 KB |
| Model Difference | Cover Letter(s) | 2024-05-06 | PDF 167.1 KB |
| MPE | RF Exposure Info | 2026-01-11 | PDF 752.2 KB |
| RF Exposure Evaluation | RF Exposure Info | 2024-05-06 | PDF 307.5 KB |
| RF Exposure Report | RF Exposure Info | 2024-05-06 | PDF 307.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 490.9 KB | |
| Schematic Metadata only | Schematics | PDF 898.3 KB | |
| OP Metadata only | Operational Description | PDF 66.5 KB | |
| Operation Description Metadata only | Operational Description | PDF 64.5 KB | |
| FCC Software Security Requirements for UNII devices Rev 2.1 Metadata only | SDR Software/Security Info. | PDF 175.9 KB | |
| SOFTWARE SECURITY REQUIREMENT SFORU-NIIDEVICES Metadata only | SDR Software/Security Info. | PDF 190.5 KB |
Application Information
| Application ID | uwW+vHWYFgo8eTKF3zrT/A== |
|---|---|
| Final Action Date | 2026-01-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0034351403 |
| Model | ZERO3W |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Radxa ZERO 3W |
| Responsible Party | Luffy Wang, support@radxa.com , 13760396499 |
| Technical Contact | Radxa Computer (Shenzhen) Co.,Ltd., support@radxa.com |
| Non-Technical Contact | Shirley Kwok, ANTEK SERVICE INC, info@antekservice.com , 303-8006306 |
| Test Firm | Bovey Yang, SHENZHEN STS TEST SERVICES CO.,LTD., Bovey@stsapp.com  , 86-755-36886288 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| uwW+vHWYFgo8eTKF3zrT/A== | 2026-01-11 | Class II permissive change or modification of presently authorized equipment |
| bblXGL2QO9LJE7rhvgKOrA== | 2026-01-11 | Class II permissive change or modification of presently authorized equipment |
| avXBtkBUjmpfqTNbdQflLg== | 2026-01-11 | Class II permissive change or modification of presently authorized equipment |
| mYOe7HgPyshQTLEPmphQUw== | 2024-05-06 | Original Equipment |
| fUm08Q4yTKfKrV3MYjWcWA== | 2024-05-06 | Original Equipment |
| +jwNEt0LuC94yXG4ll9+ow== | 2024-05-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application uwW+vHWYFgo8eTKF3zrT/A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/11/2026 Application Dated: 01/12/2026 |
| Radxa Computer (Shenzhen) Co., Ltd. |
| 1602, Smart Valley, tiezai Road, |
| Gongle community, Xixiang, Baoan, |
| Shenzhen,, China |
| Attention: Luffy Wang , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BC6T-ZERO3W |
| Name of Grantee: | Radxa Computer (Shenzhen) Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Radxa ZERO 3W |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00237 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.01611 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application mYOe7HgPyshQTLEPmphQUw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 05/06/2024 Application Dated: 05/06/2024 |
| Radxa Computer (Shenzhen) Co., Ltd. |
| 1602, Smart Valley, tiezai Road, |
| Gongle community, Xixiang, Baoan, |
| Shenzhen,, China |
| Attention: Luffy Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BC6T-ZERO3W |
| Name of Grantee: | Radxa Computer (Shenzhen) Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Radxa ZERO 3W |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.00665 | ||
| CC | 15E | 5725.0 - 5850.0 | 0.01081 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mYOe7HgPyshQTLEPmphQUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Radxa Computer (Shenzhen) Co., Ltd. 1602, Smart Valley, tiezai Road, Gongle community, Xixiang, Baoan, Shenzhen,, China |
Date of Grant: 05/06/2024 Application Dated: 05/06/2024 |
| Attention: Luffy Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BC6T-ZERO3W |
| Name of Grantee: | Radxa Computer (Shenzhen) Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Radxa ZERO 3W |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.00665 | ||
| CC | 15E | 5725.0 - 5850.0 | 0.01081 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 05/06/2024 Application Dated: 05/06/2024 |
| Radxa Computer (Shenzhen) Co., Ltd. |
| 1602, Smart Valley, tiezai Road, |
| Gongle community, Xixiang, Baoan, |
| Shenzhen,, China |
| Attention: Luffy Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BC6T-ZERO3W |
| Name of Grantee: | Radxa Computer (Shenzhen) Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radxa ZERO 3W |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00395 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fUm08Q4yTKfKrV3MYjWcWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Radxa Computer (Shenzhen) Co., Ltd. 1602, Smart Valley, tiezai Road, Gongle community, Xixiang, Baoan, Shenzhen,, China |
Date of Grant: 05/06/2024 Application Dated: 05/06/2024 |
| Attention: Luffy Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BC6T-ZERO3W |
| Name of Grantee: | Radxa Computer (Shenzhen) Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radxa ZERO 3W |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00395 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/11/2026 Application Dated: 01/12/2026 |
| Radxa Computer (Shenzhen) Co., Ltd. |
| 1602, Smart Valley, tiezai Road, |
| Gongle community, Xixiang, Baoan, |
| Shenzhen,, China |
| Attention: Luffy Wang , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BC6T-ZERO3W |
| Name of Grantee: | Radxa Computer (Shenzhen) Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radxa ZERO 3W |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00395 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application avXBtkBUjmpfqTNbdQflLg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/11/2026 Application Dated: 01/12/2026 |
| Radxa Computer (Shenzhen) Co., Ltd. |
| 1602, Smart Valley, tiezai Road, |
| Gongle community, Xixiang, Baoan, |
| Shenzhen,, China |
| Attention: Luffy Wang , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BC6T-ZERO3W |
| Name of Grantee: | Radxa Computer (Shenzhen) Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Radxa ZERO 3W |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.00665 | ||
| CC | 15E | 5725.0 - 5850.0 | 0.01081 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application +jwNEt0LuC94yXG4ll9+ow==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 05/06/2024 Application Dated: 05/06/2024 |
| Radxa Computer (Shenzhen) Co., Ltd. |
| 1602, Smart Valley, tiezai Road, |
| Gongle community, Xixiang, Baoan, |
| Shenzhen,, China |
| Attention: Luffy Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BC6T-ZERO3W |
| Name of Grantee: | Radxa Computer (Shenzhen) Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Radxa ZERO 3W |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00237 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.01611 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +jwNEt0LuC94yXG4ll9+ow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Radxa Computer (Shenzhen) Co., Ltd. 1602, Smart Valley, tiezai Road, Gongle community, Xixiang, Baoan, Shenzhen,, China |
Date of Grant: 05/06/2024 Application Dated: 05/06/2024 |
| Attention: Luffy Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BC6T-ZERO3W |
| Name of Grantee: | Radxa Computer (Shenzhen) Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Radxa ZERO 3W |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00237 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.01611 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |