FCC ID 2BCCIQUADC2A

Senquip QUAD

by Senquip Pty Ltd

Grantee Code: 2BCCI   Product Code: QUADC2A
Latest application date: 2024-04-02

FCC ID Device Details

FCC ID2BCCIQUADC2A
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BCCI
Product CodeQUADC2A
Applicant BusinessSenquip Pty Ltd 🇦🇺
Related Domains senquip.com
Equipment ClassSenquip QUAD
Test FirmMRT Technology (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-04-02
700.5-714.5 MHzOriginal Equipment2024-04-02

Exhibits

DocumentTypeAvailableFile
User Manual-1Users Manual2024-04-02PDF 4.9 MB
User Manual-2Users Manual2024-04-02PDF 5.1 MB
User Manual-3Users Manual2024-04-02PDF 5.4 MB
User Manual-4Users Manual2024-04-02PDF 5.4 MB
User Manual-5Users Manual2024-04-02PDF 5.5 MB
User Manual-6Users Manual2024-04-02PDF 5.2 MB
User Manual-7Users Manual2024-04-02PDF 911.7 KB
Users Manual-1Users Manual2024-04-02PDF 4.9 MB
Users Manual-2Users Manual2024-04-02PDF 5.1 MB
Users Manual-3Users Manual2024-04-02PDF 5.4 MB
Users Manual-4Users Manual2024-04-02PDF 5.4 MB
Users Manual-5Users Manual2024-04-02PDF 5.5 MB
Users Manual-6Users Manual2024-04-02PDF 5.2 MB
Users Manual-7Users Manual2024-04-02PDF 911.7 KB
Internal PhotosInternal Photos2024-04-02PDF 2.2 MB
External PhotoExternal Photos2024-04-02PDF 1.2 MB
LabelID Label/Location Info2024-04-02PDF 93.8 KB
Label and LocationID Label/Location Info2024-04-02PDF 93.8 KB
Test Setup PhotosTest Setup Photos2024-04-02PDF 420.6 KB
Antenna SpecTest Report2024-04-02PDF 1.1 MB
Antenna Spec LTETest Report2024-04-02PDF 823.2 KB
Module RF Exposure InfoTest Report2024-04-02PDF 266.6 KB
Module Test Report Part22-1Test Report2024-04-02PDF 4.7 MB
Module Test Report Part22-2Test Report2024-04-02PDF 2.4 MB
Module Test Report Part24Test Report2024-04-02PDF 5.6 MB
Module Test Report Part27-1Test Report2024-04-02PDF 5.6 MB
Module Test Report Part27-2Test Report2024-04-02PDF 2.6 MB
Module Test Report Part90STest Report2024-04-02PDF 3.4 MB
Test Report BLETest Report2024-04-02PDF 2.3 MB
Test Report DTS-1Test Report2024-04-02PDF 3.8 MB
Test Report DTS-2Test Report2024-04-02PDF 3.1 MB
Test Report LTETest Report2024-04-02PDF 477.7 KB
Attestation Statements part 2.911_d__5_i_ii_filingAttestation Statements2024-04-02PDF 112 KB
FCC SDOC Attestation LetterCover Letter(s)2024-04-02PDF 114.7 KB
US agent LetterAttestation Statements2024-04-02PDF 164.5 KB
CONF LetterCover Letter(s)2024-04-02PDF 125.5 KB
POA LetterCover Letter(s)2024-04-02PDF 118 KB
Statement LetterCover Letter(s)2024-04-02PDF 112.2 KB
e-label statement letterCover Letter(s)2024-04-02PDF 802.7 KB
Module RF Exposure InfoRF Exposure Info2024-04-02PDF 266.6 KB
RF Exposure InfoRF Exposure Info2024-04-02PDF 363.4 KB
BG96 Block Diagram Metadata onlyBlock DiagramPDF 229.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 75.2 KB
BG96 Schematics Metadata onlySchematicsPDF 193.9 KB
Schematics Metadata onlySchematicsPDF 3.4 MB
Operation Description Metadata onlyOperational DescriptionPDF 394.9 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 96.9 KB
Tune-up Metadata onlyParts List/Tune Up InfoPDF 24.5 KB

Application Information

Application IDQgpvGGNyatz2FXYU8d8MLQ==
Final Action Date2024-04-02
Application PurposeOriginal Equipment
Applicant FRN0034077222
ModelQUADC2A
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionSenquip QUAD
Responsible PartyNorman Ballard, Mr, norman.ballard@senquip.com , +61 (0)403266851
Test FirmMr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358
TCB EmailTEI@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
QgpvGGNyatz2FXYU8d8MLQ==2024-04-02Original Equipment
IgZrGOij8JL5YffcJLhdSQ==2024-04-02Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
700.5-714.5 MHz0.21680.00411ppm1M15G7D27
700.5-714.5 MHz0.23070.03153ppm985KW7D27
704-711 MHz0.21430.00411ppm1M21G7D27
704-711 MHz0.22750.00582ppm1M08W7D27
779.5-784.5 MHz0.21680.00334ppm1M15G7D27
779.5-784.5 MHz0.24380.03679ppm1M01W7D27
782 MHz0.2070.00465ppm1M19G7D27
782 MHz0.23710.01651ppm1M05W7D27
814.7-823.3 MHz0.19910.00477ppm1M15G7D9
814.7-823.3 MHz0.22650.02017ppm1M12W7D9
819 MHz0.19190.00482ppm1M20G7D9
819 MHz0.20230.03463ppm1M06W7D9
825.5-847.5 MHz0.23930.02166ppm984KW7D22H
825.5-847.5 MHz0.22030.00491ppm1M16G7D22H
826.5-846.5 MHz0.20420.00455ppm1M15G7D22H
826.5-846.5 MHz0.23710.02108ppm1M02W7D22H
829-844 MHz0.21780.00586ppm1M20G7D22H
829-844 MHz0.2360.01753ppm1M05W7D22H
831.5-841.5 MHz0.20180.00353ppm1M20G7D22H
831.5-841.5 MHz0.23440.04157ppm1M06W7D22H
1711.5-1753.5 MHz0.19050.01732ppm981KW7D27
1715-1750 MHz0.19280.0033ppm1M19G7D27
1720-1745 MHz0.19140.00297ppm1M21G7D27
1720-1745 MHz0.18790.03142ppm1M11W7D27
1855-1905 MHz0.27230.00578ppm1M19W7D24E
1860-1900 MHz0.26850.00639ppm1M15W7D24E
2402-2480 MHz0.004715C
2412-2462 MHz0.04315C

Grants

TCB Grant - Application QgpvGGNyatz2FXYU8d8MLQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/02/2024

Application Dated: 04/02/2024
Senquip Pty Ltd
Unit 3, 29 Shearwater Drive
Taylors Beach, 2316
Australia
 
Attention: Norman Ballard , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCCIQUADC2A
Name of Grantee:  Senquip Pty Ltd
Equipment Class: Digital Transmission System
Notes: Senquip QUAD
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.043  
15C 2402.0  -  2480.0 0.0047  

Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes.

EAS Grant - Application QgpvGGNyatz2FXYU8d8MLQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Senquip Pty Ltd
Unit 3, 29 Shearwater Drive
Taylors Beach, 2316
Australia
  Date of Grant: 04/02/2024

Application Dated: 04/02/2024
 
Attention: Norman Ballard , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCCIQUADC2A
Name of Grantee:  Senquip Pty Ltd
Equipment Class: Digital Transmission System
Notes: Senquip QUAD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.043  
15C 2402.0  -  2480.0 0.0047  

Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes.



TCB Grant - Application IgZrGOij8JL5YffcJLhdSQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/02/2024

Application Dated: 04/02/2024
Senquip Pty Ltd
Unit 3, 29 Shearwater Drive
Taylors Beach, 2316
Australia
 
Attention: Norman Ballard , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCCIQUADC2A
Name of Grantee:  Senquip Pty Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Senquip QUAD
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1855.0  -  1905.0 0.2642 0.0053  PM 1M20G7D
24E 1860.0  -  1900.0 0.2612 0.00316  PM 1M25G7D
24E 1855.0  -  1905.0 0.2723 0.00578  PM 1M19W7D
24E 1860.0  -  1900.0 0.2685 0.00639  PM 1M15W7D
27 1715.0  -  1750.0 0.1928 0.0033  PM 1M19G7D
27 1720.0  -  1745.0 0.1914 0.00297  PM 1M21G7D
27 1711.5  -  1753.5 0.1905 0.01732  PM 981KW7D
27 1720.0  -  1745.0 0.1879 0.03142  PM 1M11W7D
22H 825.5  -  847.5 0.2203 0.00491  PM 1M16G7D
22H 829.0  -  844.0 0.2178 0.00586  PM 1M20G7D
22H 825.5  -  847.5 0.2393 0.02166  PM 984KW7D
22H 829.0  -  844.0 0.236 0.01753  PM 1M05W7D
27 700.5  -  714.5 0.2168 0.00411  PM 1M15G7D
27 704.0  -  711.0 0.2143 0.00411  PM 1M21G7D
27 700.5  -  714.5 0.2307 0.03153  PM 985KW7D
27 704.0  -  711.0 0.2275 0.00582  PM 1M08W7D
27 779.5  -  784.5 0.2168 0.00334  PM 1M15G7D
27 782.0  -  782.0 0.207 0.00465  PM 1M19G7D
27 779.5  -  784.5 0.2438 0.03679  PM 1M01W7D
27 782.0  -  782.0 0.2371 0.01651  PM 1M05W7D
90 814.7  -  823.3 0.1991 0.00477  PM 1M15G7D
90 819.0  -  819.0 0.1919 0.00482  PM 1M20G7D
90 814.7  -  823.3 0.2265 0.02017  PM 1M12W7D
90 819.0  -  819.0 0.2023 0.03463  PM 1M06W7D
22H 826.5  -  846.5 0.2042 0.00455  PM 1M15G7D
22H 831.5  -  841.5 0.2018 0.00353  PM 1M20G7D
22H 826.5  -  846.5 0.2371 0.02108  PM 1M02W7D
22H 831.5  -  841.5 0.2344 0.04157  PM 1M06W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 emissions, which are conducted. This transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports LTE Cat M1 (eMTC) FDD LTE Bands 2, 4, 5, 12, 13 and 26.

EAS Grant - Application IgZrGOij8JL5YffcJLhdSQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Senquip Pty Ltd
Unit 3, 29 Shearwater Drive
Taylors Beach, 2316
Australia
  Date of Grant: 04/02/2024

Application Dated: 04/02/2024
 
Attention: Norman Ballard , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCCIQUADC2A
Name of Grantee:  Senquip Pty Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Senquip QUAD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1855.0  -  1905.0 0.2642 0.0053  PM 1M20G7D
24E 1860.0  -  1900.0 0.2612 0.00316  PM 1M25G7D
24E 1855.0  -  1905.0 0.2723 0.00578  PM 1M19W7D
24E 1860.0  -  1900.0 0.2685 0.00639  PM 1M15W7D
27 1715.0  -  1750.0 0.1928 0.0033  PM 1M19G7D
27 1720.0  -  1745.0 0.1914 0.00297  PM 1M21G7D
27 1711.5  -  1753.5 0.1905 0.01732  PM 981KW7D
27 1720.0  -  1745.0 0.1879 0.03142  PM 1M11W7D
22H 825.5  -  847.5 0.2203 0.00491  PM 1M16G7D
22H 829.0  -  844.0 0.2178 0.00586  PM 1M20G7D
22H 825.5  -  847.5 0.2393 0.02166  PM 984KW7D
22H 829.0  -  844.0 0.236 0.01753  PM 1M05W7D
27 700.5  -  714.5 0.2168 0.00411  PM 1M15G7D
27 704.0  -  711.0 0.2143 0.00411  PM 1M21G7D
27 700.5  -  714.5 0.2307 0.03153  PM 985KW7D
27 704.0  -  711.0 0.2275 0.00582  PM 1M08W7D
27 779.5  -  784.5 0.2168 0.00334  PM 1M15G7D
27 782.0  -  782.0 0.207 0.00465  PM 1M19G7D
27 779.5  -  784.5 0.2438 0.03679  PM 1M01W7D
27 782.0  -  782.0 0.2371 0.01651  PM 1M05W7D
90 814.7  -  823.3 0.1991 0.00477  PM 1M15G7D
90 819.0  -  819.0 0.1919 0.00482  PM 1M20G7D
90 814.7  -  823.3 0.2265 0.02017  PM 1M12W7D
90 819.0  -  819.0 0.2023 0.03463  PM 1M06W7D
22H 826.5  -  846.5 0.2042 0.00455  PM 1M15G7D
22H 831.5  -  841.5 0.2018 0.00353  PM 1M20G7D
22H 826.5  -  846.5 0.2371 0.02108  PM 1M02W7D
22H 831.5  -  841.5 0.2344 0.04157  PM 1M06W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 emissions, which are conducted. This transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports LTE Cat M1 (eMTC) FDD LTE Bands 2, 4, 5, 12, 13 and 26.



Mail To: