FCC ID 2BCGWEAP615GPW

AX1800 Wall Plate Wi-Fi 6 GPON Access Point

by TP-LINK CORPORATION PTE.LTD.

Grantee Code: 2BCGW   Product Code: EAP615GPW
Latest application date: 2024-06-03

FCC ID Device Details

FCC ID2BCGWEAP615GPW
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BCGW
Product CodeEAP615GPW
Applicant BusinessTP-LINK CORPORATION PTE.LTD. 🇸🇬
Related Domains tp-link.com newbtl.com
Equipment ClassAX1800 Wall Plate Wi-Fi 6 GPON Access Point
Test FirmBTL Inc.

Linked Records

Barcode records decoded from published FCC label exhibits or linked by an explicit FCC ID reference on a product page.

UPC / GTINLinked product
004190081399
UPC-A · GTIN-14 00004190081399
AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Brand: TP-LINK CORPORATION PTE.LTD. · Model: EAP615GPW
Source: FCC label
009910186699
UPC-A · GTIN-14 00009910186699
AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Brand: TP-LINK CORPORATION PTE.LTD. · Model: EAP615GPW
Source: FCC label

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2024-06-03
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-06-03
2412-2462 MHzOriginal Equipment2024-05-16
5180-5240 MHzOriginal Equipment2024-05-16

Exhibits

DocumentTypeAvailableFile
14. Users Manual part1Users Manual2024-05-16PDF 643.4 KB
14. Users Manual part2Users Manual2024-05-16PDF 544.6 KB
15. Internal Photos Part1 REV1Internal Photos2024-06-03PDF 5.4 MB
15. Internal Photos Part2Internal Photos2024-06-03PDF 2.4 MB
18. Internal PhotosInternal Photos2024-05-16PDF 2 MB
16. External Photos Metadata onlyExternal Photos2024-06-03PDF 1.4 MB
19. External PhotosExternal Photos2024-05-16PDF 560.3 KB
13. Label and locationID Label/Location Info2024-05-16PDF 25.3 KB
6.Test setup photosTest Setup Photos2024-06-03PDF 372.3 KB
11. FCC WIFI Test Setup PhotosTest Setup Photos2024-05-16PDF 948 KB
5.Test Report BTL-FCCP-1-2312G170A WLAN 2.4G R00Test Report2024-06-03PDF 648.2 KB
5.Test Report BTL-FCCP-2-2312G170A WLAN 5G R00Test Report2024-06-03PDF 631.7 KB
5.Test Report BTL-FCCP-3-2312G170A_MPE R00RF Exposure Info2024-06-03PDF 158 KB
12. Test Report BTL-FCCP-1-2312G170_WLAN 2.4G R00_PART1Test Report2024-05-16PDF 5.3 MB
12. Test Report BTL-FCCP-1-2312G170_WLAN 2.4G R00_PART2Test Report2024-05-16PDF 5.2 MB
12. Test Report BTL-FCCP-1-2312G170_WLAN 2.4G R00_PART3Test Report2024-05-16PDF 2 MB
12. Test Report BTL-FCCP-2-2312G170_WLAN 5G Band 1 4 R02 rev2_part1Test Report2024-05-16PDF 5.3 MB
12. Test Report BTL-FCCP-2-2312G170_WLAN 5G Band 1 4 R02 rev2_part2Test Report2024-05-16PDF 5.5 MB
12. Test Report BTL-FCCP-2-2312G170_WLAN 5G Band 1 4 R02 rev2_part3Test Report2024-05-16PDF 231.2 KB
22. Antenna SpecificationTest Report2024-05-16PDF 768 KB
1.FCC Attestation Letter COVERED EQUIPMENT_newAttestation Statements2024-06-03PDF 116.6 KB
11. FCC U.S.-Agent-Letter-for-Service-of-ProcessAttestation Statements2024-06-03PDF 312.9 KB
25. Attestation Statements US agent for service of processAttestation Statements2024-05-16PDF 312.9 KB
27. Attestation Statements Certifications concerning covered equipmentAttestation Statements2024-05-16PDF 354 KB
10. FCC DOCCover Letter(s)2024-06-03PDF 417.5 KB
12. FCC Non-SDR Cover LetterCover Letter(s)2024-06-03PDF 312.6 KB
13. FCC Wi-Fi Channel 12 and 13 Declaration LetterCover Letter(s)2024-06-03PDF 57 KB
3.Authorization letterCover Letter(s)2024-06-03PDF 80.9 KB
4. FCC Confidentiality Request LetterCover Letter(s)2024-06-03PDF 205.4 KB
7.Class II permissive change format letter REV1Cover Letter(s)2024-06-03PDF 201.8 KB
2. FCC Agency Authorization LetterCover Letter(s)2024-05-16PDF 105.8 KB
20. FCC DOCCover Letter(s)2024-05-16PDF 442.2 KB
29. FCC Wi-Fi Channel 12 and 13 Declaration LetterCover Letter(s)2024-05-16PDF 49.2 KB
32. FCC Non-SDR Cover LetterCover Letter(s)2024-05-16PDF 340.7 KB
6. FCC Confidentiality Request LetterCover Letter(s)2024-05-16PDF 282.7 KB
13. FCC MPE BTL-FCCP-3-2312G170_MPE R00RF Exposure Info2024-05-16PDF 171.1 KB
16. Block Diagram Metadata onlyBlock DiagramPDF 1 MB
14.Schematics Metadata onlySchematicsPDF 1.2 MB
15. Schematics Metadata onlySchematicsPDF 1.8 MB
17. Operation Description rev1 Metadata onlyOperational DescriptionPDF 22.8 KB
30. SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Metadata onlySDR Software/Security Info.PDF 761.5 KB
9. SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Metadata onlySDR Software/Security Info.PDF 459 KB

Application Information

Application IDLmtfTm4dG5BiD04S9G8IrA==
Final Action Date2024-06-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0034122556
ModelEAP615GPW
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAX1800 Wall Plate Wi-Fi 6 GPON Access Point
Responsible Partysarah wang, cert@tp-link.com , +86 755 21534921
AgentRose Rose Rose, BTL Inc., Rose.liu@newbtl.com , 076983183000
Technical ContactSteven Lu, BTL Inc., steven@newbtl.com , 076983183000
Non-Technical ContactRose Lu, BTL Inc., Rose.liu@newbtl.com , 076983183000
Test FirmSophia Huang, BTL Inc., sophia.huang@newbtl.com , 86-769-83183000
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to change the signal transformer of the network ports, as documented in this filling. Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.

Applications

Application IDDatePurpose
LmtfTm4dG5BiD04S9G8IrA==2024-06-03Class II permissive change or modification of presently authorized equipment
IfUoJCP0PQx4qu6CWxcsMw==2024-06-03Class II permissive change or modification of presently authorized equipment
jJ3USqafvMpQoI4lgt3LMw==2024-05-16Original Equipment
FIs365nbtieJCDITRHnMAQ==2024-05-16Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.200400015CCC, MO
5180-5240 MHz0.210915ECC, MO
5745-5825 MHz0.214315ECC, MO

Grants

TCB Grant - Application LmtfTm4dG5BiD04S9G8IrA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 06/03/2024

Application Dated: 06/03/2024
TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03
Suntec Tower One, Singapore 038987
Singapore,
Singapore
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWEAP615GPW
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Digital Transmission System
Notes: AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.2004  

Class II Permissive Change to change the signal transformer of the network ports, as documented in this filling.

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application LmtfTm4dG5BiD04S9G8IrA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
Singapore,
Singapore
  Date of Grant: 06/03/2024

Application Dated: 06/03/2024
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWEAP615GPW
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Digital Transmission System
Notes: AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.2004  

Class II Permissive Change to change the signal transformer of the network ports, as documented in this filling.

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application jJ3USqafvMpQoI4lgt3LMw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/16/2024

Application Dated: 05/15/2024
TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03
Suntec Tower One, Singapore 038987
Singapore,
Singapore
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWEAP615GPW
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Digital Transmission System
Notes: AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.2004  

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jJ3USqafvMpQoI4lgt3LMw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
Singapore,
Singapore
  Date of Grant: 05/16/2024

Application Dated: 05/15/2024
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWEAP615GPW
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Digital Transmission System
Notes: AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.2004  

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application IfUoJCP0PQx4qu6CWxcsMw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 06/03/2024

Application Dated: 06/03/2024
TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03
Suntec Tower One, Singapore 038987
Singapore,
Singapore
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWEAP615GPW
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2109  
CC MO 15E 5745.0  -  5825.0 0.2143  

Class II Permissive Change to change the signal transformer of the network ports, as documented in this filling.

Power Output listed is conducted. Device is an 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains a 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application IfUoJCP0PQx4qu6CWxcsMw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
Singapore,
Singapore
  Date of Grant: 06/03/2024

Application Dated: 06/03/2024
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWEAP615GPW
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2109  
CC MO 15E 5745.0  -  5825.0 0.2143  

Class II Permissive Change to change the signal transformer of the network ports, as documented in this filling.

Power Output listed is conducted. Device is an 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains a 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application FIs365nbtieJCDITRHnMAQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/16/2024

Application Dated: 05/15/2024
TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03
Suntec Tower One, Singapore 038987
Singapore,
Singapore
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWEAP615GPW
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2109  
CC MO 15E 5745.0  -  5825.0 0.2143  

Power Output listed is conducted. Device is an 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains a 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application FIs365nbtieJCDITRHnMAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
Singapore,
Singapore
  Date of Grant: 05/16/2024

Application Dated: 05/15/2024
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWEAP615GPW
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX1800 Wall Plate Wi-Fi 6 GPON Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2109  
CC MO 15E 5745.0  -  5825.0 0.2143  

Power Output listed is conducted. Device is an 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains a 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: