FCC ID 2BCGWEAP725WALL
BE5000 Wall Plate Wi-Fi 7 Access Point
by TP-LINK CORPORATION PTE.LTD.
Grantee Code: 2BCGW Product Code: EAP725WALL
Latest application date: 2024-12-02
FCC ID Device Details
| FCC ID | 2BCGWEAP725WALL |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BCGW |
| Product Code | EAP725WALL |
| Applicant Business | TP-LINK CORPORATION PTE.LTD. 🇸🇬 |
| Related Domains |  tp-link.com  mrt-cert.com |
| Equipment Class | BE5000 Wall Plate Wi-Fi 7 Access Point |
| Test Firm | MRT Technology (Taiwan) Co.,Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2024-12-02 |
| 2402-2480 MHz | Original Equipment | 2024-12-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| EAP725-Wall_Install Guide | Users Manual | 2024-12-02 | PDF 385 KB |
| EAP725-Wall_Overview of Regulatory Compliance | Users Manual | 2024-12-02 | PDF 830.8 KB |
| FCC-UI-Internal Photograph | Internal Photos | 2024-12-02 | PDF 3.6 MB |
| FCC-UE-External Photograph | External Photos | 2024-12-02 | PDF 497.3 KB |
| EAP725-Wall_Label | ID Label/Location Info | 2024-12-02 | PDF 1.5 MB |
| FCC-UT-Test Setup Photograph | Test Setup Photos | 2024-12-02 | PDF 670 KB |
| EAP725-Wall_BLE AUT Report | Test Report | 2024-12-02 | PDF 673.4 KB |
| EAP725-Wall_Wi-Fi-AUT Report | Test Report | 2024-12-02 | PDF 545.4 KB |
| FCC Part 15.247-BLE_V1.0 | Test Report | 2024-12-02 | PDF 4.6 MB |
| FCC Part 15.247-WiFi 2.4G_V1.0_Part1 | Test Report | 2024-12-02 | PDF 5.2 MB |
| FCC Part 15.247-WiFi 2.4G_V1.0_Part2 | Test Report | 2024-12-02 | PDF 5.3 MB |
| FCC Part 15.247-WiFi 2.4G_V1.0_Part3 | Test Report | 2024-12-02 | PDF 5.5 MB |
| FCC Part 15.407-WiFi 5G-DFS_V1.0_Part1 | Test Report | 2024-12-02 | PDF 5.6 MB |
| FCC Part 15.407-WiFi 5G-DFS_V1.0_Part2 | Test Report | 2024-12-02 | PDF 5.6 MB |
| FCC Part 15.407-WiFi 5G-DFS_V1.0_Part3 | Test Report | 2024-12-02 | PDF 5.6 MB |
| FCC Part 15.407-WiFi 5G-DFS_V1.0_Part4 | Test Report | 2024-12-02 | PDF 1.7 MB |
| FCC Part 15.407-WiFi 5G_V1.0_Part1 | Test Report | 2024-12-02 | PDF 5.5 MB |
| FCC Part 15.407-WiFi 5G_V1.0_Part2 | Test Report | 2024-12-02 | PDF 5.2 MB |
| FCC Part 15.407-WiFi 5G_V1.0_Part3 | Test Report | 2024-12-02 | PDF 5.5 MB |
| FCC Part 15.407-WiFi 5G_V1.0_Part4 | Test Report | 2024-12-02 | PDF 5.2 MB |
| FCC Part 15.407-WiFi 5G_V1.0_Part5 | Test Report | 2024-12-02 | PDF 5.6 MB |
| FCC Part 15.407-WiFi 5G_V1.0_Part6 | Test Report | 2024-12-02 | PDF 4.6 MB |
| ACB-FORM-FCC-Application-Letters-Covered-List-Attestation_TPCSG | Attestation Statements | 2024-12-02 | PDF 456.1 KB |
| ACB-FORM-FCC-Application-Letters-U.S.-Agent-Letter-for-Service-of-Process_TPCSG | Attestation Statements | 2024-12-02 | PDF 252.5 KB |
| EAP723-FCC Attestation Letter | Attestation Statements | 2024-12-02 | PDF 144.2 KB |
| EAP723-FCC Confidentiality Request Letter | Cover Letter(s) | 2024-12-02 | PDF 149.9 KB |
| EAP723-FCC Declaration of Authorization | Cover Letter(s) | 2024-12-02 | PDF 151.6 KB |
| EAP723-FCC Declaration of Conformity | Cover Letter(s) | 2024-12-02 | PDF 144.4 KB |
| EAP723-Non-SDR letter | Cover Letter(s) | 2024-12-02 | PDF 180.4 KB |
| EAP725-Wall-Declaration of Frequency Stability | Cover Letter(s) | 2024-12-02 | PDF 130.9 KB |
| FCC RF Exposure Report_V1.0 Metadata only | RF Exposure Info | 2024-12-02 | PDF 415.1 KB |
| FCC RF Exposure Report_V1.0_Rev | RF Exposure Info | 2024-12-02 | PDF 362.9 KB |
| ISED RF Exposure Report_V1.0 Metadata only | RF Exposure Info | 2024-12-02 | PDF 368.6 KB |
| Confidential_EAP725-Wall_Block Diagram Metadata only | Block Diagram | PDF 220 KB | |
| Confidential_EAP725-Wall_Schematic-A Board Metadata only | Schematics | PDF 1.7 MB | |
| Confidential_EAP725-Wall_Schematic-B Board Metadata only | Schematics | PDF 280.9 KB | |
| Confidential_EAP725-Wall_Operational Description Metadata only | Operational Description | PDF 354.6 KB | |
| Confidential_EAP725-Wall_Operational Description_Rev Metadata only | Operational Description | PDF 108.2 KB | |
| EAP723-Software Security Requirements Cover Letter Metadata only | SDR Software/Security Info. | PDF 173.2 KB |
Application Information
| Application ID | WP3re8MqZ6sQ+AUt4LHkpg== |
|---|---|
| Final Action Date | 2024-12-02 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0034122556 |
| Model | EAP725WALL |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | BE5000 Wall Plate Wi-Fi 7 Access Point |
| Responsible Party | sarah wang, cert@tp-link.com , +86 755 21534921 |
| Agent | Marlin Marlin Marlin, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358 |
| Technical Contact | Robin Wu, MRT Technology (Suzhou) Co., Ltd, robinwu@mrt-cert.com , 86-512-66308358 |
| Non-Technical Contact | Robin Wu, MRT Technology (Suzhou) Co., Ltd, robinwu@mrt-cert.com , 0512-66308358 |
| Test Firm | Chenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is output power conducted. Device is a 802.11a/n/ac/ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz, 80MHz, 160MHz and 240MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BLE transmitter and 2.4GHz WLAN transmitters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| WP3re8MqZ6sQ+AUt4LHkpg== | 2024-12-02 | Original Equipment |
| Ch7ufUcuQv2kW4YbAS9+Pg== | 2024-12-02 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application WP3re8MqZ6sQ+AUt4LHkpg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/02/2024 Application Dated: 11/27/2024 |
| TP-LINK CORPORATION PTE.LTD. |
| 7 Temasek Boulevard #29-03 |
| Suntec Tower One, Singapore 038987 |
| Singapore, Singapore |
| Attention: sarah wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BCGWEAP725WALL |
| Name of Grantee: | TP-LINK CORPORATION PTE.LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BE5000 Wall Plate Wi-Fi 7 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.2931 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.227 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2399 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3069 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.0962 |
| Power Output listed is output power conducted. Device is a 802.11a/n/ac/ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz, 80MHz, 160MHz and 240MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BLE transmitter and 2.4GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application WP3re8MqZ6sQ+AUt4LHkpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-LINK CORPORATION PTE.LTD. 7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987 Singapore, Singapore |
Date of Grant: 12/02/2024 Application Dated: 11/27/2024 |
| Attention: sarah wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BCGWEAP725WALL |
| Name of Grantee: | TP-LINK CORPORATION PTE.LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BE5000 Wall Plate Wi-Fi 7 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.2931 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.227 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2399 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3069 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.0962 |
| Power Output listed is output power conducted. Device is a 802.11a/n/ac/ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz, 80MHz, 160MHz and 240MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BLE transmitter and 2.4GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/02/2024 Application Dated: 11/27/2024 |
| TP-LINK CORPORATION PTE.LTD. |
| 7 Temasek Boulevard #29-03 |
| Suntec Tower One, Singapore 038987 |
| Singapore, Singapore |
| Attention: sarah wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BCGWEAP725WALL |
| Name of Grantee: | TP-LINK CORPORATION PTE.LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | BE5000 Wall Plate Wi-Fi 7 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0501 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2805 |
| Power Output listed is output power conducted. Device is a 802.11b/g/n/ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Ch7ufUcuQv2kW4YbAS9+Pg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-LINK CORPORATION PTE.LTD. 7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987 Singapore, Singapore |
Date of Grant: 12/02/2024 Application Dated: 11/27/2024 |
| Attention: sarah wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BCGWEAP725WALL |
| Name of Grantee: | TP-LINK CORPORATION PTE.LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | BE5000 Wall Plate Wi-Fi 7 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0501 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2805 |
| Power Output listed is output power conducted. Device is a 802.11b/g/n/ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |