FCC ID 2BCGWRE600XV2

AX1800 Wi-Fi 6 Range Extender

by TP-LINK CORPORATION PTE.LTD.

Grantee Code: 2BCGW   Product Code: RE600XV2
Latest application date: 2024-05-29

FCC ID Device Details

FCC ID2BCGWRE600XV2
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BCGW
Product CodeRE600XV2
Applicant BusinessTP-LINK CORPORATION PTE.LTD. 🇸🇬
Related Domains tp-link.com newbtl.com
Equipment ClassAX1800 Wi-Fi 6 Range Extender
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-05-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2024-05-29
2412-2462 MHzOriginal Equipment2024-03-04
5180-5240 MHzOriginal Equipment2024-03-04

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2024-03-04PDF 5.1 MB
16. Internal photosInternal Photos2024-05-29PDF 3.6 MB
EUTPhoto_InternalInternal Photos2024-03-04PDF 709.5 KB
15. External photosExternal Photos2024-05-29PDF 284.5 KB
EUTPhoto_ExternalExternal Photos2024-03-04PDF 225.6 KB
label R1ID Label/Location Info2024-03-04PDF 1.5 MB
6.Test setup photosTest Setup Photos2024-05-29PDF 372.3 KB
Setup Photo R1Test Setup Photos2024-03-04PDF 885.3 KB
5.Test Report_WALN 2.4G R00Test Report2024-05-29PDF 717.6 KB
5.Test Report_WLAN 5G Band 1-4 R00Test Report2024-05-29PDF 734.6 KB
5.Test Report__MPE R00RF Exposure Info2024-05-29PDF 234.2 KB
4791046401-1-RF-1-WIFI 2.4G FCC ISED R2_Part1Test Report2024-03-04PDF 4.8 MB
4791046401-1-RF-1-WIFI 2.4G FCC ISED R2_Part2Test Report2024-03-04PDF 4.8 MB
4791046401-1-RF-1-WIFI 2.4G FCC ISED R2_Part3Test Report2024-03-04PDF 5 MB
4791046401-1-RF-1-WIFI 2.4G FCC ISED R2_Part4Test Report2024-03-04PDF 4.9 MB
4791046401-1-RF-1-WIFI 2.4G FCC ISED R2_Part5Test Report2024-03-04PDF 2.2 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part1Test Report2024-03-04PDF 5 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part10Test Report2024-03-04PDF 4.9 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part11Test Report2024-03-04PDF 4.8 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part12Test Report2024-03-04PDF 3.6 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part2Test Report2024-03-04PDF 4.9 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part3Test Report2024-03-04PDF 5 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part4Test Report2024-03-04PDF 4.8 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part5Test Report2024-03-04PDF 5 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part6Test Report2024-03-04PDF 5 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part7Test Report2024-03-04PDF 4.9 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part8Test Report2024-03-04PDF 5 MB
4791046401-1-RF-2-WIFI 5G FCC ISED R2_Part9Test Report2024-03-04PDF 4.9 MB
Antenna specificationTest Report2024-03-04PDF 969.6 KB
11. FCC Attestation Letter COVERED EQUIPMENTAttestation Statements2024-05-29PDF 113.4 KB
12. FCC U.S.-Agent-Letter-for-Service-of-ProcessAttestation Statements2024-05-29PDF 312.9 KB
ACB-FORM-FCC-Application-Letters-Covered-List-AttestationAttestation Statements2024-03-04PDF 385.6 KB
FCC Attestation LetterAttestation Statements2024-03-04PDF 421.5 KB
FCC Attestation LetterCover Letter(s)2024-03-04PDF 421.5 KB
US agent letterAttestation Statements2024-03-04PDF 648.7 KB
1. FCC Non-SDR Cover LetterCover Letter(s)2024-05-29PDF 303.9 KB
10. Declaration of ConformityCover Letter(s)2024-05-29PDF 406.2 KB
13. FCC Wi-Fi Channel 12 and 13 Declaration LetterCover Letter(s)2024-05-29PDF 12.7 KB
3.Authorization letterCover Letter(s)2024-05-29PDF 68.9 KB
4.Confidentiality request letterCover Letter(s)2024-05-29PDF 198.7 KB
9. Class II permissive change format letter-FCC Ver1Cover Letter(s)2024-05-29PDF 123.2 KB
ACB-FORM-FCC-Application-Letters-Agency-Letter R1Cover Letter(s)2024-03-04PDF 129.9 KB
ACB-FORM-FCC-Application-Letters-Confidentiality-LetterCover Letter(s)2024-03-04PDF 382.4 KB
Declaration of Frequency StabilityCover Letter(s)2024-03-04PDF 418.2 KB
FCC Declaration of ConformityCover Letter(s)2024-03-04PDF 423.5 KB
Non-SDR letterCover Letter(s)2024-03-04PDF 517.8 KB
4791046401-1-RF-3-FCC RF Exposure Report R1RF Exposure Info2024-03-04PDF 349.5 KB
block diagram Metadata onlyBlock DiagramPDF 251.3 KB
7.Schematics Metadata onlySchematicsPDF 1.5 MB
schematics Metadata onlySchematicsPDF 1.3 MB
Operation Description R3 Metadata onlyOperational DescriptionPDF 110.8 KB
Software Security Requirements Cover Letter R1 Metadata onlyOperational DescriptionPDF 281.2 KB

Application Information

Application IDz+7ItG31G7xlh/KKj/pRGQ==
Final Action Date2024-05-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0034122556
ModelRE600XV2
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAX1800 Wi-Fi 6 Range Extender
Responsible Partysarah wang, cert@tp-link.com , +86 755 21534921
AgentRose Rose Rose, BTL Inc., Rose.liu@newbtl.com , 86-769-83183000
Technical ContactSteven Lu, BTL Inc., steven@newbtl.com , 86-769-83183000
Non-Technical ContactRose Liu, BTL Inc., Rose.liu@newbtl.com , 86-769-83183000
Test FirmSophia Huang, BTL Inc., sophia.huang@newbtl.com , 86-769-83183000
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change as described in this filing. Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in 2X2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz and VHT/HE 80 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN transmitter.

Applications

Application IDDatePurpose
z+7ItG31G7xlh/KKj/pRGQ==2024-05-29Class II permissive change or modification of presently authorized equipment
wGW4XxShmW0RtYoQZpZa8Q==2024-05-29Class II permissive change or modification of presently authorized equipment
kHf3KZcX584KD9ttzIK1bw==2024-03-04Original Equipment
5N1WUOQdshYhtIWj4F9Y+g==2024-03-04Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.426000015CCC, MO
5180-5240 MHz0.1915ECC, MO
5260-5320 MHz0.24315ECC, MO, ND
5500-5720 MHz0.23215ECC, MO, ND
5745-5825 MHz0.3715ECC, MO

Grants

TCB Grant - Application z+7ItG31G7xlh/KKj/pRGQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/29/2024

Application Dated: 05/27/2024
TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03
Suntec Tower One, Singapore 038987
Singapore,
Singapore
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWRE600XV2
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX1800 Wi-Fi 6 Range Extender
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.19  
CC MO ND 15E 5260.0  -  5320.0 0.243  
CC MO ND 15E 5500.0  -  5720.0 0.232  
CC MO 15E 5745.0  -  5825.0 0.37  

Class II Permissive Change as described in this filing. Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in 2X2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz and VHT/HE 80 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application z+7ItG31G7xlh/KKj/pRGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
Singapore,
Singapore
  Date of Grant: 05/29/2024

Application Dated: 05/27/2024
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWRE600XV2
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX1800 Wi-Fi 6 Range Extender
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.19  
CC MO ND 15E 5260.0  -  5320.0 0.243  
CC MO ND 15E 5500.0  -  5720.0 0.232  
CC MO 15E 5745.0  -  5825.0 0.37  

Class II Permissive Change as described in this filing. Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in 2X2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz and VHT/HE 80 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application wGW4XxShmW0RtYoQZpZa8Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/29/2024

Application Dated: 05/27/2024
TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03
Suntec Tower One, Singapore 038987
Singapore,
Singapore
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWRE600XV2
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Digital Transmission System
Notes: AX1800 Wi-Fi 6 Range Extender
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.426  

Class II Permissive Change as described in this filing. Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in WLAN 2.4GHz transmitter and it contains WLAN 5GHz transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application wGW4XxShmW0RtYoQZpZa8Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
Singapore,
Singapore
  Date of Grant: 05/29/2024

Application Dated: 05/27/2024
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWRE600XV2
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Digital Transmission System
Notes: AX1800 Wi-Fi 6 Range Extender
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.426  

Class II Permissive Change as described in this filing. Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in WLAN 2.4GHz transmitter and it contains WLAN 5GHz transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application kHf3KZcX584KD9ttzIK1bw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 03/04/2024

Application Dated: 03/04/2024
TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03
Suntec Tower One, Singapore 038987
Singapore,
Singapore
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWRE600XV2
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Digital Transmission System
Notes: AX1800 Wi-Fi 6 Range Extender
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.426  

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in WLAN 2.4GHz transmitter and it contains WLAN 5GHz transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application kHf3KZcX584KD9ttzIK1bw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
Singapore,
Singapore
  Date of Grant: 03/04/2024

Application Dated: 03/04/2024
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWRE600XV2
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Digital Transmission System
Notes: AX1800 Wi-Fi 6 Range Extender
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.426  

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in WLAN 2.4GHz transmitter and it contains WLAN 5GHz transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5N1WUOQdshYhtIWj4F9Y+g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 03/04/2024

Application Dated: 03/03/2024
TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03
Suntec Tower One, Singapore 038987
Singapore,
Singapore
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWRE600XV2
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX1800 Wi-Fi 6 Range Extender
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.19  
CC MO 15E 5745.0  -  5825.0 0.37  
CC MO ND 15E 5260.0  -  5320.0 0.243  
CC MO ND 15E 5500.0  -  5720.0 0.232  

Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in 2X2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz and VHT/HE 80 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 5N1WUOQdshYhtIWj4F9Y+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-LINK CORPORATION PTE.LTD.
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
Singapore,
Singapore
  Date of Grant: 03/04/2024

Application Dated: 03/03/2024
 
Attention: sarah wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BCGWRE600XV2
Name of Grantee:  TP-LINK CORPORATION PTE.LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AX1800 Wi-Fi 6 Range Extender
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.19  
CC MO 15E 5745.0  -  5825.0 0.37  
CC MO ND 15E 5260.0  -  5320.0 0.243  
CC MO ND 15E 5500.0  -  5720.0 0.232  

Output power listed is conducted. Device is an 802.11 a/n/ac/ax device in 2X2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz and VHT/HE 80 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: